Urban Local Bodies has published Tender For Supply Of Ri Cycle Rickshaw With Wooden Container For Garbage.. Submission Date for this Tender is 15-05-2023. Pedal Powered Vehicles Tenders in rohtak Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying of loading Rickshaw for Garbage. SPECIFICATION FOR TRICYCLE :- 1 Frame work with fitting Mid steel heavy duty tubular frame with 5 tubes, made from tube size 28.6 mm x 1.63mm confirming to IS 2039/1991 of reputed make. 2 Pedal Heavy Duty pedals of reputed make 3 Handle Handle bar shall be of Heavy duty chrome plated & shall confirm to IS:625/1993 and the size shall not be less thab 410 mm between the two handle grip. The Front forks shall be as per IS:20611995 and it shall be of reputed make. 4 Chain Wheel & Crank Heavy Duty Chrome plated chain wheel and cranks confirming to IS: 1281/1996 of rebutted make. 5 Chain 212 inks heavy duty extra strong chin confirming to designation 083-1 of IS:2403/1991 of reputed make. 6 Chain Cover Quarter Chain cover block of thick gauge of size 18 gauge *3.5’’ width of reputed make.7 Front mudguard Front Mudguard of 18 gauge with steel style of reputed make. 8 Spoke 10 gauge with brass nipple and washers. 9 Hub 64x10 Gauge front –BCP. 10 Fork Guard Heavy Duty black painted with clip. 11 Quarter Pin Standard zinc Plated 9.5mm. 12 Free Wheel 22T 13 Seat Good Quality. Scooter Type. 14 Brake With heavy duty shoe and clip. 15 Front Rim 28’’x1.5’’ heavy-10 Gauge 1.6 kg. of reputed make. 16 Front Type & Tube The type of size 28’’x1.5’’24ply heavy duty type confirming to IS:2414/1991 and tube confirming to IS:2414/1992 f reputed make like Ralko, Metro, Hindustan/ International. 17 Rear Rim 3.25x16 Gauge Bullet rim -16’’ die Hub bearing 2204/2205 withMS round spoke of Heavy dutyadditionally supported by 4 Nos. M.s. Plate 30 mmx 4mm angle to further support heavy load. 18 Rear Tyres& Tube Heavy duty motorcycle Tyre of reputed make like MRF, Ceat, JK 19 Rear Mud Guard Heavy duty,16 gauge steel mud guard 20 Bell 1 no. 3’’ round, Heavy Duty. 21 Lock 1 No. good quality with 7 levers. 22 Reflectors Red reflectors on each mud guard at the rear & front. SPECIFICATION FOR WOODEN CONTAINER :- Wooden frame Body Size-32’’X48’’X18” made of dry Kikkar wooden planks of 15 mm thickness with four nos. of handles on side wall of box duty protected by MS Steel of 24 gauge at bottom and inner side of the wooden box duty fitted on Tricycle through heavy chassis made of angle 30 mm X 30 mm X 6 mm at two places from top to bottom intacting side wooden planks with bottom plank, at two places to intact bottom planks with front side of box and at two places intacting wooden planks on three sides of the box duly fitted on tricycle at various places. Rear side of the box should be of detachable type duly guarded by angles of size 25mm X 25 mm X 6 mm for the free movement of rear wall. The rear wall of the box should be made of 15 mm wooden planks of Kikkar wood duly intacted by angle of size 25mm X 25 mm X 6 mm all around duly guarded by 16 gauge MS Steel from inside fitted with two handles to lift the rear side. M.S. Corners made of angle size 15 mm X 15 mm X 6 mmare to be provided to support the wooden body against widening The wooden bare o surface of box should be painted with single coat of wooden primer and two coats of first quality of synthetic enamel paint Yellow Shaded marking thereon with black colour with synthetic enamel on both side walls as serial no. and Municipal Corporation, Rohtakcomplete in all respect. The MS Steel and all metallic surface should be painted with two coats of First Quality rust free paint after applying one coats of metallic. The bottom of the box should be provided with six in nos. holes of 12 mm dia dulyscattered on whole of the bottom surface to facilitate the box to drain the water accumulated in box to protect the box from corrosion. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
