Dharapuram Municipality-agecode007 has published Tender For Dharapuram Municipality Construction Of Additional Class Room Building In Municipal Middle School In Old Police Station Road Of Dharapuram Municipality. Submission Date for this Tender is 16-05-2023. Building Work Tenders in dharapuram Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthwork excavation and depositing on bank within initial lead of 10m and initial lift of 2m as sand silt or other loose soil wet sand light black cotton soil and ordinary soil including excavated earth etc., as per standard specification complete |
| 2 | SDR - (Not Requiring Blasting)Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock,laterite ,soft rock or kankar,not requiring blasting |
| 3 | Supplying and filling in foundation andbasement with filling Crushed stone Sandin layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 4 | Plain Cement Concrete 1:5:10 (one cement, fiveCrushed stone Sandand ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 5 | Brick work in C.M 1:5 mix (one cement & Five sand) using Country brick size (9" x 43/8 x 23/5 cm) including cost and conveyence of all meterials to site and all labour charges etc., as per standard specification |
| 6 | Upto Basement level |
| 7 | above basement level Ground Floor |
| 8 | First Floor |
| 9 | Second Floor |
| 10 | "Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) " |
| 11 | For Footing and Grade beam |
| 12 | For plane surfaces such as R0.45 floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. " |
| 13 | c)For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 14 | Reinforced cement concrete 1:1.5:3 (one cement one point five sand & three aggregate) using 20mm size ISS metal including cost and conveyence of all meterials to site mixing laying consolidating working etc., but excluding cost of steel wherever neccesary fan hooks fixing etc., complete as per standard specification. |
| 15 | a)Foundation & basement |
| 16 | b)Ground floor |
| 17 | c)1st Floor |
| 18 | d) 2nd floor |
| 19 | Supply and fabricating and placing in position of M.S. or RTS of steel rods torequired size and length as directed by the departmental officers including cost of binding wire, cutting, tying etc., including cost and conveyance of all materials etc., upto 16mm dia. |
| 20 | Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 21 | Plastering with cement mortar 1:5 (one cement five sand) mix to 12mm thick including cost and coveyance of all materials to site finishing curing etc., complete. |
| 22 | Plastering with cement mortar 1:3 (one cement three sand) mix to 10mm thick including cost and coveyance of all materials to site finishing curing etc., complete. |
| 23 | Flooring finishing withvitrified tiles of size 60 cm x 60 cm laid in cement mortor 1:3 mix to 20mm thick and paint with cement paint 0.40/cm2 including finishing jointing and put with tiles surface as complete etc., complete |
| 24 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 25 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) window of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the door. The door should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The door should be got approved from the executive Engineer before use on work |
| 26 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 27 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 28 | Supply and fixing of M.S Grills with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification |
| 29 | Weatheringcoursewithbrokenbrick jelly of 20mm sizewithpurelyslackedlimein thepropotional of32 : 12.50 including cost and conveyence of all meterials and labour charges for laying ( No sand to be added ) finishing curing and well beaten with wooden beaters etc; complete as per standard specification. |
| 30 | Finishing the top of roof with one course of machine pressed tiles 20x20x2cm laid in cm 1:3 mixed with water proofing component at 2% by weight of cement used by pointed with same water proof component mixed cement mortar and red oxide etc. complete complying with standard specification. |
| 31 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete |
| 32 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 33 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD 23 |
| 34 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD 23 |
| 35 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD 38 |
| 36 | Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch (two way) with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC straircase light point (SD 27) |
| 37 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colourSD 56 |
| 38 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD 55 |
| 39 | Supply and fixing of MINIATURE CIRCUIT BREAKERS(MCB) Double Pole 32A, 10KA240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS |
| 40 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
