Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-05-2023 | Date Corrigendum | Date | 06-06-2023 |
| Sl. No. | Item Description |
| 1 | Taking down carefully any type of copper/aluminium point wiring (light,fan, socket or power) complete including conduits/casing caping with fittings such as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed |
| 2 | M & L for point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wiredrawn in and including PVC Casing & Caping double lock/conduit pipe type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminatedin to Cast iron/pressed steel terminal box 60mm deep of required sizemade out of 1.6/1.8 mm thick MS sheet duly painted both sides with 3 mm thick plasticlaminated sheet top coverfixed with brass screw & cup washersfor one light point controlled by one 5 Amp switch one way complete all as specified and as directed |
| 3 | All as per item No. 2.00 herein before but for concealed wiring in PVC conduit in wall/ceilling of size not less more than 20 mm dia for one light point controlled by one 5 Amp switch one way complete all as specified and as directed |
| 4 | All as per item No. 2.00 here in before, but for one fan/exhaust fan point controlled by one 5 Amp all as specified and as directed. |
| 5 | All as per item No. 2.00here in before,but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed. |
| 6 | All as per item No. 2.00here in before, but for one light point controlled by two 2-way switches all as specified and as directed. |
| 7 | All as per item No. 2.00here in before, but for one 3/5 Pin, 5 Amp Switch socket out leton the independent board complete all as specified and as directed |
| 8 | All as per item No. 2.00 above, butwith 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switchon the independent board complete all as specified and as directed. |
| 9 | Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed. |
| 10 | M & L for sub main wiring with two runs of single core 2.5 Sqm, FRLSCopper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigidPVC casing caping (double interlock type) of suitable width medium dutywith all accessories such as Tees, elbows,junction boxes etc, as required fixed on wall along with one run of 1.5 Sqmm single core PVC FRLSinsulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit) |
| 11 | All as per item No. 10.00 here in before, but two run of single core 4 sqmm and one run of 2.5 sqmm cables as earth continuity conductor all as directed. |
| 12 | All as per item No. 10.00 here in before, but two run of single core 6 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed. |
| 13 | All as per item No. 10.00 here in before, but four run of single core 10 sqmm and two runs of 6 sqmm cables as earth continuity conductor all as directed. |
| 14 | S & F in repairs Switch Piano flush type single pole one way 5 A , 240 V complete all as specified and as directed |
| 15 | S & F in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed |
| 16 | S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed |
| 17 | S & F in repairs Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed |
| 18 | S & F in repairs Modular Bell push single pole, one way, 240 V, 6 Acomplete all as specified and as directed |
| 19 | S & F in repairs Switch Socket combination 3 pin , 5 Amp flush type, 240 V,complete all as specified and as directed |
| 20 | S & F in repairsModular Socket outlet 3 pin, 6 Amp , 240 volts,complete all as specified and as directed |
| 21 | S & F in repairs Switch Socket Combination 16A/6A, , 6 pin,240 volts complete all as specified and as directed |
| 22 | S & F in repairs Modular Socket outlet 16A/6A, 6 pin, flush type universal, 240 volts complete all as specified and as directed |
| 23 | S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm three terminals 240 voltscomplete all as specified and as directed |
| 24 | S & F in repairs call bell ding dongAC, 230 volts, single pole all as directed |
| 25 | S&F in repairs stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed. |
| 26 | S&F in repairs stepped Modular electronic fan regulator flush type on the existing board all as directed. |
| 27 | S & F in repairs modular flush metal boxfixed in 60 mm deep of followingsizefixed with screwfor mounting modular switches, Sockets, fan regulators etcfor existing elect arrangements and connected to the existing electric wires, making good the distrubed area with cement work and paints as same existing backgound all as directed.(Note : New modular switches, sockets & fan regulators will be measured and paid separely)(a) Size of the boxessuitable for 1/2 module |
| 28 | All as per item No. 27 here in before, but Size of the boxsuitable for 3 module |
| 29 | All as per item No. 27 here in before, but Size of the box suitable for 4 module |
| 30 | All as per item No. 27 here in before, but Size of the box suitable for 6 module |
| 31 | All as per item No. 27 here in before, but Size of the box suitable for 8 module |
| 32 | All as per item No. 27 here in before, but Size of the box suitable for 12 module |
| 33 | S & F in repairs White inner, outer cover plate Modular type with frame, 2 module |
| 34 | Diito all as per item No 33 here in before but 3 module |
| 35 | Diito all as per item No 33 here in before but 4 module |
| 36 | Diito all as per item No 33here in before but 6 module |
| 37 | Diito all as per item No 33 here in before but 8 module |
| 38 | Diito all as per item No 33 here in before but 12 module |
| 39 | S & F in repairs PVC Casing & Caping double lock type of as required width (not less than 20/25 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling etc. complete all as specified and as directed. |
| 40 | S & F in repairs PVC conduit of 20mm diaofISI markedwith all accessories of same grade fixed on wall/ceiling etc. complete all as specified and as directed. Note:- Cutting / cheasling of wall and finish as original surface after fixing conduit including putty and paintingincluded in the quated rate. |
| 41 | S & F in repairs knob suitable for Rotary type Flamproof switch in LM6,15A single pole 230V complete all as specified and as directed. |
| 42 | Taking down unserviceable any type of Main Switch, DB\"s including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed. |
| 43 | S&F in repairs sheet metal enclosurewith a two pin and earth plug and socket complete including one SP MCB 20 Amps complete all as specified. |
| 44 | S & F in repairs MCCB DB VTPN, 4 way, prewireddouble door, with suitable busbar ,andprovision ofMCCB of upto 125 amps , 4 pole ,415 Volts without MCB complete all as specified and as directed |
| 45 | S & F in repairs MCCB DB VTPN, 6 way, prewireddouble door, with suitable busbar,and provision ofMCCB of upto 250 amps , 4 pole,415 volts without MCB complete all as specified and as directed |
| 46 | Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 25 KA, 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing/New DB\"s complete all as specified and as directed |
| 47 | Supply and fix in repairs MCCB of 200 A breaking capacity 25 KA , 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB\"s complete all as specified and as directed |
| 48 | S&F in repairs MCB DB TPN 4 way, 415 V with suitable bus bar double door type complete all as specified and as directed. |
| 49 | S&F in repairs MCB DB TPN 6 way DB 415 V with suitable bus bar double door type complete all as specified and as directed. |
| 50 | S&F in repairs MCB DB SPN 8 way DB 230 V with suitable bus bar double door type complete all as specified and as directed. |
| 51 | All as per item No 50 here in before but MCB DB SPN 4 way DB 230 V with including suitable busbar . |
| 52 | All as per item No 50 here in before but MCB DB SPN 12 way DB 230 V with including suitable busbar. |
| 53 | S & F in repairs MCB 4P 40-63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 54 | S & F in repairs MCB 4P32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 55 | S & F in repairs MCB TP40amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 56 | S & F in repairsMCB SPN32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 57 | S & F in repairsMCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 58 | Supply and fixing LED light fitting 18/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectio with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 59 | S & FEnergy efficient surface Mounted LED Luminire 20 watts 4\" long, 230 volt, 50Hz AC with acrylic cover aluminium exeruded body complete with all accessories including necessary three core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr completeall as specified and as directed. |
| 60 | S & F in repairs Energy efficient surface Mounted LED Luminire 10 watts 2\" long,230 volt , 50Hz AC with acrylic cover with alluminium body extruded complete with all accessories incl necessary three core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed. |
| 61 | S & FEnergy efficient surface Mounted LED Luminire 40 watts 4\" long, with LED betten for surface mounting, pandent and conduit mounting high transmissitivity defuser and high lumen output completeall as specified and directed. |
| 62 | S & FEnergy efficient Recess Mounted LED Luminire 36/40 watts 4\"x1\" size 230 volts ,50 hz ACfor ceilling mounting and high lumen output completeall as specified and as directed. |
| 63 | S & F in repairs recess/surface mounting high lumen LED flat panel 2\"x2\" 36 Watt, white powder coated CRCA housing with high power LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V, complete with all accessories such as electronic driver, LED strip, connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and as directed. |
| 64 | S & F in repairs recess/surface mounting high lumen LED flat panel 1\"X1\" 18 Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and as directed. |
| 65 | S&F in repairs LED batten 1x10 W inbuilt motion sensor based smart 2ft LED 230 volt 50hzwith alluminium extruded channel, powder coated with diffuser for glare free light inbuilt motion sensor prewired with 25 % dimmer illuminous in ideal timewith all accessories including two no of pvc box of size 75x75x20 mm for mounting fitting with all accessories integrated electronic driver complete all as specified and as directed. |
| 66 | S&F in repairs LED batten 1x 9 W inverter batten working on AC supply in normal mode and DC supply in inverter mode with inbuilt battery back up of upto 4 hours with high efficency, high lumen output, 2 ft LED 230 volt 50hz all accessories including integrated electronic driver complete all as specified and as directed. |
| 67 | Supply and fix in repairs inverter Bulb works on AC supply in Normal mode and DC supply in inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency, high lumes output, LED bulb 9 W 240volts, 50Hz complete all as specified and as directed. Note:- Taking down old CFL/LED bulb included in quoted rate. |
| 68 | S&F for bulb holder suitable for 6 Aas per requirement (batten, angled etc) complete all as specified and as directed. |
| 69 | S&F in repairs LED track light 20 watts alluminium housing with adjustable mounting track light , 230 volts 50 hz ACprewired with all accessories integrated electronic driver complete all as specified and as directed.(Note :-The track rate are included in the quated rate. One track consist of 3-4 track LED light). |
| 70 | S & F in repairs Integral decorative LED bollard mushroom shaped with B22/E27 bulb holder with cast alluminium housing and polymer diffuser with IP-65 protection of9 watts capacity complete all as specified and as directed.Note:- bulbs are measured and paid seperatelly. |
| 71 | S & F in repairs LED Bulb 15 watts 230 volts, 50 hz AC complete all as specified and as directed. |
| 72 | M & L in replacementLED decorative post top lantern light with a modern look using new generation technology LED 40 W alluminium housing with clear acrylic diffuser includingcast aluminium pole cap complete all as specified and as directed. |
| 73 | S&F in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as suitable size of GI pipe, fixing clamp, brackets, etc., complete all as specified and as directed. |
| 74 | S & F in repairs 60 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified. |
| 75 | Supply and fixin replacement of 90 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED\"s must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 100 lumen/Watt.The luminarie should have 5 KV surge protection,PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided.The manufactures LOGO must be embossed/Engraved in the housing of the luminarie complete all as specified and as directed. |
| 76 | Supply and fix Street light bracket made out of GI tubing 32/40 mm dia light grade bend to shape suitable for above mentioned Bldg security light/street light/Pigmi light fittings with necessary GI clamps 40mm x 6 mm - 02 Nos including nut, bolt, washers etc all as specified. |
| 77 | Supply and fixin repairs LED flood light fitting 120 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED\"s and electronic driver, internally prewiredincluding necessary fixing arrangement on PCC pole by providingMS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection complete all as specified and as directed. |
| 78 | M & L for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamberin cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed. |
| 79 | M & L Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4mm as earthing lead by means of blots, nuts, check nut and washer of galvanized steel, includingnecessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 40 mm dia pipe of requiredlength for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR Part - I and all directed including connections and testing on completion. |
| 80 | M&L for testing earth resistance of earthingpit with help of earth resistance megger in the presence of MES Staffand countersign by Engineer-in-Charge and submit report to sub-division for future correspondance complete all as specified and as directed. |
| 81 | M & L for ceiling fan 1200 mm sweep BLDC fan with suitable RPM, single phase 26/28 watts, 230 volt, 50 Hz AC low energy consumption remote control, anti corrosive aluminium blade and body complete fitting complete all as specified and as directed. |
| 82 | M & L for exhaust fan AC single phase 230V of size 300 mm sweep heavy duty with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan complete all as specified and as directed. |
| 83 | M & L for exhaust fan AC single phase 230V of size 380-450 mm sweep heavy duty metal body and blade with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan all complete all as specified and as directed. |
| 84 | M & L for exhaust fan AC single phase 230V of size 200/250 mm sweep light duty plastic body and blades with louver and connecting up including provision of flexible copper wire three core of size 23/0.0076 from ceiling rose/PVC connector to exhaust fan complete all as specified and as directed. |
| 85 | S & F in repairs Switch Flame Proof WP Rotary type with termination box in LM6,15A single pole 250V complete all as specified and as directed. |
| 86 | S & F in repairsFlameproof Switch socket combination with termination box in LM6, 16A single pole 250V complete all as specified and as directed. |
| 87 | S & F in repairs test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hex. Head screw |
| 88 | S & F in repairs Aluminum strip of size 25 x 3 mm in repair with saddles and fixing screws etc. for roof conductors and down conductors above ground and fixing in the same location with new nuts and bolts of suitable size and length and connected to air termination rod on top of the hangar complete all as specified and as directed. |
| 89 | S & F in repairs GI wire 04 mm dia for connecting to DB to earthing as required for safty, fixing screws etc complete all as specified and as directed. |
| 90 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping complete all as specified and as directed. |
| 91 | Taking down carefully ceiling fans of size 1200/1400 mm sweep at any height of any sweep/make/model after disconnecting electric connection and dismantling andopening the body of ceiling fan and examine for repairs including servicing, overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts, spring washers for blade / body etc and replacement of components/ accessories such as ball bearings, gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and as directed. |
| 92 | Note :- (i)Spare parts will be measured and paid separately under relevant item of schedule as supply only (ii)Rewinding of fan motor, painting will be measured and paid separetly under relevant item of schedule.(iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate |
| 93 | All as per item No. 91.00 & 91.01 above, butexhaust fan of size upto 300 mm sweep complete all as specified and as directed. |
| 94 | All as per item No. 91.00 & 91.01 above, butexhaust fan of metal body size above 380 mm and upto 450 mm sweep complete all as specified and as directed. |
| 95 | Material and labour for painting to ceiling fan of size 1200 mm sweep to 1400 mm sweep complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paintby using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and as directed.Note :- Painting work to be carried out after dismantling of ceiling fan. Taking out old fan and refixing in same location after painting are included in the quated rate. |
| 96 | All as per item No. 94.00 above, butexhaust fan of metal body size above 300 mm to 450 mm sweep complete all as specified and as directed. |
| 97 | Material and labour for rewinding of ceiling fan motorof size 1200 mm sweep to 1400 mm sweep of any make/model/type with new supper enamelled copper winding wire ofsimilar gauge and number of turns as existing, including cleaningthe motor properlyand applyingvarnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motorcomplete all as specified and as directed. |
| 98 | All as per item No. 96.00 here in before but of exhaust fan of size upto 300 mm sweep complete all as specified and as directed. |
| 99 | All as per item No. 96.00 here in before but of exhaust fan of size above 380 mm and upto 450 mm sweep complete all as specified and as directed. |
| 100 | S & F in repairs capacitor of 2.5/3.15/4.0 mfd capacity for ceiling fan of any sweep complete all as specified and as directed. |
| 101 | Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type complete all as specified and as directed. |
| 102 | Supply only ball bearing suitable for ceiling fan/exhaust fan any type complete all as specified and as directed. |
| 103 | Supply only split pin as per sample suitable for ceiling fan complete all as specified and as directed. |
| 104 | Supply only MS nut bolt with split pin as per sample complete all as specified and as directed. |
| 105 | Supply only plastic conopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type. |
| 106 | Supply and fix down rodmade of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rodwith two coat of synthetic enamel paintover one coat of red oxide primer. |
| 107 | Supply and Fix in repair Ceiling Fan motor with body complete suitable 1200 mm Sweep matching to blade of existing ceiling fan complete all as specified and as directed. |
| 108 | Supply and Fixin repair Fan Blade set of three suitable of any make and sweep up to 1200 mm sweep matching to existing ceiling fan complete all as specified and as directed.Note:- Fan Blade make and size shuld be supply with the mach of under relivent item of Sch Aserial No 106.00 as above. |
| 109 | Supply and fix copper conductor cable, PVC insulated, sheathed, flexible, multistranded, ISI marked, 1100 volts grade 3 core, 0.75 sqmm and including electric connection to ceiling fan and ceiling rose complete all as specified and as directed. |
| 110 | M &L for removing old unserviceable motor assembly from exhaust fan and fixing new exhaust fan motor assembly suitable of size 300 mm sweep andincluding nuts, washers, and testing complete all as specified and as directed. |
| 111 | M &L for removing old unserviceable blade assembly from exhaust fan and fixing new exhaust fan blade assembly suitable of size 300 mm sweep andincluding locking nuts and testing complete all as specified and as directed. |
| 112 | M &L for removing old unserviceable motor assembly from exhaust fan and fixing new exhaust fan motor assembly suitable of size 450 mm sweep andincluding nuts, washers, and testing complete all as specified and as directed. |
| 113 | M &L for removing old unserviceable blade assembly from exhaust fan and fixing new exhaust fan blade assembly suitable of size 450 mm sweep andincluding locking nuts and testing complete all as specified and as directed. |
| 114 | S & F in repairs GI clamp/Saddles for fixing of XLPE cable/ flexible cable of any size on the wall surface incuding drilling in wall, fixing of new screws suitable length complete all as specified and as directed. |
| 115 | Supply only ofPVC electrical LT insulation tape 18 mm width in 6-8 mtr roll complete all as specified and as directed. |
| 116 | S & F in repairs LED COB Light of 15 watts 230 volts 50hz AC supply complete all as specified and as directed. |
| 117 | REPAIR / MAINT OFEXTERNAL ELECTRIC LT OH LINES, UG CABLES, LT POLES STREET LIGHTS, PERIMETER LIGHT, HIGH MAST LIGHT AND CONNECTED WORKS AT NTS, COVELLOLISM, NDB AND HANSA VIAHR AT INS HANSA UNDER GE (NW) VASCO |
| 118 | Excavation in trenches n.exceeding 1.5 Mtr wide and not exc 1.5 Mtr deep getting in hard/dense soil includinglevelling of bottom surface to required level for laying UG cable / errection of poles complete all as specified and as directed. |
| 119 | Excavation in trenches n.exceeding 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/disintegrated rock getting out and levelling of bottom surface to required level complete all as specified and as directed. |
| 120 | Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wallfor laying of pipe/cable including making good the existing surface with PCC 1:3:6 type c1 concrete finish to match the original surface complete all as specified and as directed. |
| 121 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed. |
| 122 | Removing excavated material of any type from site to a distance not exc 50 mtr away and depositing where directed at a level not exc 1.5mtr from the starting point complete all as specified and as directed. |
| 123 | Supply and lay Double walled corrugated pipe (DWC), heavy duty 77/63 mm bore for cable protection as a guard pipe including required accessories etc. complete as specified and as directed. |
| 124 | Supply and lay Double walled corrugated pipe (DWC), heavy duty 110/95 mm bore for cable protection as a guard pipe including required accessories etc. complete as specified and as directed. |
| 125 | Taking down old unserviceable LT UG cable of any description (from trenches, fixed on walls, Poles, ceilings., etc) from various locations, Supply and laying new UG, LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 10 Sq mm, 2 core, with aluminium conductor, ISI marked as per IS : 7098 (Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified. |
| 126 | All as per item No. 124.00 here in before but of size 2 core 16 sqmm |
| 127 | All as per item No. 124.00 here in before but of size 4 core 16 sqmm |
| 128 | All as per item No. 124.00 here in before but of size 4 core 25 sqmm |
| 129 | All as per item No. 124.00 here in before but of size 3 1/2 core 35 sqmm |
| 130 | All as per item No. 124.00 here in before but of size 3 1/2 core 50 sqmm |
| 131 | All as per item No. 124.00 here in before but of size 3 1/2 core 70 sqmm |
| 132 | Note for item No 8 to 14 :-1.Excavation, Concrete cable protection pipe, PCC work for road crossing / hard standing etc will be measured and paid separately.2.Cost of glands,aluminium cable lugs (eye lid/barrel / bottle neck type/ring type or any shape), new nut, bolt and washers of required size / description are deemed to include in this rate. |
| 133 | M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work / using any description all as directed. |
| 134 | M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work / using as coping / any description all as dirceted. |
| 135 | M & L for preparation of old painted surface, cleaning the surface of the RCC pole (LT) above theground level to top of the pole incl chanals , street light brackets and coping area (if provides) with two coat of ACC exterior Emulsion paint as per exisitng colour all around the pole all as directed. |
| 136 | Supply and fix or laying in trenches / on wall / poles / structures as in repairs GItubing light grade for road crossing / for cable protection / fixing of pigmi lights etc,of the following sizes including necessary provision for cable entry if reqd in pigmi lights pole, fixing screws complete as required all as directed. |
| 137 | 100 mm dia |
| 138 | 80 mm dia |
| 139 | 50 mm dia |
| 140 | 40 mm dia |
| 141 | M & L for Earthing complete with GI earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 32x 6 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 142 | M & L forEarthing complete with copperearth plate, electrode,600 x 600 x 3.15 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to Copper strip size 20 x 3 mm thick dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50 mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 32 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and as directed. |
| 143 | Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 250 x 200 x 100 mm incl necessary suitable size new aluminium bus bar 04 Nos mounted on saddles suitable for 3 phase 4 wire system of suitable length and thickness, provn of new aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of GI flat 25 x 3 mm, nut and bolt on poles complete all as specified and as directed. |
| 144 | Supply and fix in repairs cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 300 x 200 x 125 mm incl necessary suitable size new aluminium bus bar 04 Nos mounted on saddles suitable for 3 phase 4 wire system of suitable length and thickness, provn of new aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of GI flat 25 x 3 mm, nut and bolt on poles complete all as specified and as directed. |
| 145 | Taking out the existing unserviceable MCCB from any description, Supply and fix MCCB 4 pole 415 volts with adjutable type 100-160 Amps with breaking capacity 25 KA complete including necessary connection with suitable size aluminum / copper cable lugs complete all as specified and as directed. |
| 146 | All as per item No. 139.00 here in before but of MCCB4 pole 415 volts 30KA breaking capacity 200-250 Amps . |
| 147 | S & F in repairs HT / LT MS cable route indicator with two Nos of nut, bolt and washers and provision of PCC 1:4:8 type D-2 using 40 mm grade stone aggregate of not less than 0.05 cum in each at base buried under the groundincl necessary earth work complete all as specified and as directed. |
| 148 | Supply and fix in repairs LED post with die cast aluminium body and with white powder coated aluminium reflector and IP-65 protection of 40 watts capacity complete all as specified and as directed. |
| 149 | S & F in repairs Energy efficient LED street LightLuminaire 60 watts capacity comprises a die-cast aluminium housing all as directedincluding connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded from LT over head line/ UG Cableto the connector of fitting, connection wires not to be more than 2.5 metre in length duly run through GI bracket complete all as specified and as directed. |
| 150 | All as per item No. 143.00 here in before but of capacity90 watts . |
| 151 | Supply and fix in repairs Galvanised Iron cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length beat to any shape drilling holes, fixed on poles or jointed by means of elect welding complete incl taking down / dismantling the old items complete all as specified and as directed. |
| 152 | S & F in repairs Pin type porcelain vitreous,brown of white insulator to suit 1100 Volt working pressure of size 100 mm height, 65mm dia, including one galvanised mild steel spindle, two galvanished iron washer and one GI nut complete all as specified and as directed. |
| 153 | S & F in repairs Shackle typePorcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 100 mm and dia 115 mm having working pressure 1100 volts grade complete all as specified and as directed. |
| 154 | Dismantling of existing old unserviceable ACSR conductor of any size of any descritpion complete all as specified and as directed. |
| 155 | Taking down the GI / PVC cable protection pipe along with UG cable from pole / wall by disconnecting all incoimg and outgoing connections from the unserviceable street / security lightjunction boxes and breaking thepole coping, opening the cable loop kept under the pipe / any description by excavation of earth work, cut the damaged portion of UG cable of any size and making new termination arrangementetc,. cut the GI / PVC pipe of required length, re-filling the exavated soils ccomplete all as specified and as directed.(Note:- PCC etc will be measured and paid separetly) |
| 156 | Taking down the old street light of any size by disconnecting all connection from LTRCC pole/Octagonal pole of any height , checking / removing the carban connection / fixing of new driver to the unserviceable street / security lightand refixing the street light as existing complete all as specified and as directed.(Note:- LED driver are measured and paid separatly ) |
| 157 | Taking down of existing old unserviceable flood light fitting of any type& supply and fixLED Flood light fittings 180 Watts including fixing arrangement and necessary connections complete all as specified and as directed. |
| 158 | Taking down of existingold unserviceable flood light fitting of any types, supply and fixLED Flood light fittings 200 Watts incl fixing arrangement and necessary connections complete all as specified and as directed. |
| 159 | S & F in repairs LED Aviation light comprising of aluminium housing with polycarbonate enclosure, 302 Nos. LED are provided with necessary fixing arrangements & electrical connections complete all as specified and as directed. |
| 160 | M & L for LT heat shrinkable cable Jointing kit suitable for 3.5/4.0 core, 06 to 16 Sqmm aluminium cable complete all as specified and as directed. |
| 161 | All as per item No. 154.00 here in before but of 3.5/4.0 core 25 to 50 Sqmm aluminium cable complete all as specified and as directed. |
| 162 | All as per item No. 154.00 here in before but of 3.5 core 70 to 95 Sqmm aluminium cable complete all as specified and as directed. |
| 163 | All as per item No. 154.00 here in before but of 3.5 core 120 to 240 Sqmm aluminium cable complete all as specified and as directed. |
| 164 | M & L for removing vegetation, grass, scrubs and bushes or any small tree branches growing in Sub station yard along with fencing, around the pole, under the HT/LT transmission lines, yards or any description by mannually / mechanically and keep the sub station yard neat and clean complete all as specified and as directed.Note :- Unit rate quoted deemed to include to keep the installation neat and clean through out the period of contract and each cleaning will be measured and paid. |
| 165 | M & L for Cutting and trimming of tree branches of girth upto 150 mm dia located 3mtr all around of any size obstructing lumination of street light/ perimeter lights and touching LT / HT Over head line incl removing trimmed tree branches complete all as specified and as directed. Note : Each cut will be measured and paid |
| 166 | Supply and spread for graded coarse aggregate (broken stone or boulders) of size 40mm in substation yard complete all as specified and as directed. |
| 167 | S & F in repairs LT PVC line spacer suitable for existing 3 phase 4 wire OHT system complete all as specified and as directed. |
| 168 | S & F in repairs LT junction box suitable for 1100 Volt gradeoutdoor type, single door, pedestal mounted, overall size not less than 650 x 650 x 450 mm,having aluminium bus bar of400 A capacity - 04 Nos with necessary hole for connection of LT cables mounted on suitable strength epoxy insulator 1100 KV grade, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheetsuitable for 3 Phase 4 wite system, duly insulated with heat shrinkable type coloured sleeve, supported on suitable size \"C\" Channel in the vertical position - 04 Nos,LT danger notice board fixed on dooron both side, with independent plates at bottom for each out going and in coming cables in cable alley and painted with powder coatingin Siemens grey colour andincl Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legsand made out of ISA 4040, 40 x 40 x 6 mm thick angle iron duly painted - 01 No. all as approved andas directed. |
| 169 | Supply and fix ofalluminium cable lugs / ferrol of following size complete all as specified and as directed. |
| 170 | 10-35 sqmm dia |
| 171 | 35-95 sqmm dia |
| 172 | 120-300 sqmm dia |
| 173 | Supply and fix ofcable gland of following size complete all as specified and as directed |
| 174 | 10-70 sqmm dia |
| 175 | 95-300 sqmm dia |
| 176 | S & F perforated cable tray made out of GI Sheet of 14 SWG thickness and 40 to 50 mm depth hot dipped in various width sizes including accessories like couplar plate, nut bolts, washers clamps, wall bracket up/down elbows, bends tees equal distances on wall/floor/through wall crossing and making good the surface, completeall asspecified and as directed. |
| 177 | S&F in repair reflective informatory sign boards with single side writing as per IRC 67 made of high intensity grade sheeting, fixed over aluminium sheet3 mm thick, supported on angle iron / GI pipes fixed in PCC including welding and painting with two coats of synthetic enamel paint over a coat of primer complete all as directed. (MS Angle/Square tube iron work /GI pipe / GI Angle PCC will be measured and paid seperately under relevent item of this schedule) |
| 178 | M & L for Steel work in tubular trusses including special shaped washer etc. completebutt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 179 | S & F in repair Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15 cm size all as directed. |
| 180 | Dismantling stay assembly complete all as specified and as directed. |
| 181 | M & L as in repairs for stay assembly complete with all sections such as stay plate, stay clamps, Stay brackets with 20 mm dia stay rod complete all as shown in electrical plate No. 1 of SSR Part 1 complete. (Note :Loop insulator, excavation and concrete work will be measured and paid separately) |
| 182 | Dismantling concrete poles/ struts, any size, removing the old unserviceable pole from site complete all as specified and as directed. |
| 183 | Supply & transporting and erecting in replacement octagonal hot dipped galvanised mild steel pole with grey powder finish 7 meter long complete with top dia of size 70 mm and bottom dia of sie 130 mm including base plate of size 200x200x12 mm, foundation nuts bolts including RCC foundation of suitable size to withstand the said pole and GI bracket for mounting on top of the pole for fixing of 01 Nos of street light complete all as specified and as directed for street lights. |
| 184 | S & F in repairs multicolour flexible copper cable 3 core 1.5 sqmm, 1100 volts complete all as specified and as directed. |
| 185 | S & F in repairs multicolour flexible copper cable 3 core 2.5 sqmm, 1100 volts complete all as specified and as directed. |
| 186 | S & F in repairs CO2 type fire extinguisher with trolley with delivery hose, mounting clamps, and standard accessories of capacity 6 kg capacity complete all as specified and as directed. |
| 187 | M & Lpainting of HT / LT Panel of any sizeby preparation of old surface and applying one coat of red oxide primer and two coat of synthetic enamelled paint of standard colour code as existing surface complete all as specified and as directed. (Note:- Colour of paint decided by engr-in-charge.) |
| 188 | Supply and fix in repair digital Timmeralong with enclouser panel , dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet including fixing arrangement cable lugs/gland/nut, bolt and washers if required complete all as specified and as directed. |
| 189 | Supply onlyLED driver with transformer suitable for 25 to 60 watts LEDstreet/Flood/high bay light fitting of complete all as specified and as directed. |
| 190 | All as per item No. 178.00 here in beforebut of capacity 70 to 90 watts LED fittings complete all as specified and as directed. |
| 191 | Supply and fix in repair changeover swithcs on load change over switches 4 pole 200/250 Amps in sheet steel enclosure with enclosure, including necessary spreaders/cable lugs/ gland / nut, bolt and washers if required complete all as specified and as directed. |
| 192 | Material and labour for fault finding of LT cables of anysizeany length with fault detective machine by thumbing method and suitablevoltage and all as permanufactures instructions including providing straight through joint and additional cable ofsame existing size suitable to site requirement complete all as specified and as directed. |
| 193 | S & F in repairsLT Control panel board CPRI Approved, Outdoor type, front openable door, wallmounted,One incomming compartment and one for alluminiumbusbar compartment and one outgoing compartment having, provision ofhaving oneincomming in MCCBswitch of 200 Amps, and each outgoing feeders connectedbusbar,dust and vermin proof & lockable, factory made, fabricated out of 3.00 mm thick CRCA sheetsuitable for 3 Phase and Neutral of 415 volts 50 Hz, AC supply, bus bar chamber with alluminium bus bar of 600 Amp rating for 3 phase and neutral4 wire system duly insulated incl necessaryconnections, common earth bus bar ofGI Strip 32x6 mm at bottom with panel board at oneearth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coatingin siemens grey colour and provision for the following incoming and out going (connected with busbar) accessories all as approved andcomprising as under following:- |
| 194 | Incoming :- a)MCCB 4 Pole, 200 Amp415V - 01 No b) Digital Volt meter 0 - 500V, size 96 x 96 mm square type with selector switch - 01 Setc) Digital Amp Meter 0 - 100 Amp, size 96x96 mm square type with selector switch- 01 Set.d) Indicator Lamps (LED type) showing R, Y, B phase - 01 set.e) Angle iron base frame as reqd size as per above panel, total leg height 900 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.f) Angle iron base frame as reqd size as per above panel, total leg height 900 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.g) M & L for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job |
| 195 | Outgoing :-a)MCCB 4 Pole, 63 Amp415V - 03 No a)MCCB 4 Pole,100-160 Amp415V - 1 No |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail