Tender For Installation Submersible Pump With Iron Removar Tank At Tablapara Icds Centre Sansad Ii Tied, Under Kotwali Gp, English Bazar Dev-Block, Malda, Fund 15 Th (Fc ) Tide
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 May 2023
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kotwali → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Submersible Pump With Iron Removar Tank At Tablapara Icds Centre Sansad Ii Tied, Under Kotwali Gp, English Bazar Dev-Block, Malda, Fund 15 Th (Fc ) Tide
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.d) For depth upto 150 metre for 50 mm dia. tube well with topenlargement of 100 mm dia.i) 50 mm dia |
| 2 | Labour for boring tube well of required dia. by water jet system throughany type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.d) For depth upto 150 metre for 50 mm dia. tube well with topenlargement of 100 mm dia.i) 100 mm dia |
| 3 | Washing and developmenttube well with air compressor pump & engine for 8 (eight) hour conditions pumping per day as necessary arrangement for yield in gallons per hour with V notch including hire & labour & fuel charges for all tools & Plants & scaffolding as required complete in all respects according to the direction of the .E.I.C. |
| 4 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pia size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. |
| 5 | Construction of cement concrete (4:2:1) base cube 600 mm cube using jhama chips 20 mm down thick cement plaster (4:1) all sides & top including neat cement finishing, shuttering, curing complete. |
| 6 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories………(a) Carriage up to work site (each socket fitted) i) 50 mm dia |
| 7 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories………(a) Carriage up to work site (each socket fitted) i) 100 mm dia |
| 8 | Supplying fitting and fixing of P.V.C reducing socket with ISI mark.(a)100 mm x 50 mm |
| 9 | Supplying fitting and fixing high density polythine strainer of approved make with adapter confirming to I.S specification.(a) 50 mm dia. |
| 10 | Supplying, fitting and fixing steel cutter piece up to 450 mm long with sockets.(a) 50 mm dia. |
| 11 | Supply, fitting and fixing PVC pipes for underground work of approved make of (medium duty) conforming to ASTMD-1785 & threaded to match with G.I-pipes as per IS:1239 (Part-I) with all necessary accessories… for delivery from housing (well pipe)......... (a) 40 mm dia. |
| 12 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.Supplying, fitting & fixing G.I pipes of \"TATA\" make with all necessary accessories, specials viz.socket,bend,tee,union cross,elbo,nipple,long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats, clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fitting as required joining materials and two coats of painting with approved paint in any position above ground. level & in under ground.(Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessorie, specials.) (ii) 40mm dia. (M) |
| 13 | Supplying, fitting & fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq.cm.(ii) 25 mm dia. |
| 14 | Supplying, fitting & fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted andtested to 21 kg per sq.cm. (ii)15 mm dia. |
| 15 | Supply, fitting and fixing at site of submersible pumping machinery capable of discharging clear of water 5000 litre per hour against total head of 49 M. complete with single phase (220 V ), 50 Hz. A.C. Motor (mark KSB/TEXMO/CROMPTON) along with 3 mt. Submersible Cable.(H.Q curve of pump should be produced at the time of delivery) (1.5 H.P) |
| 16 | Supply, fitting & fixingof 3 core 2.5 mm 2 Flat Copper Submersible Cable ( mark FINOLEX/HAVELL\"s) |
| 17 | (a) Supply and delivery of M.S. Rest clamp complete. Nut & Bolts of 10 mm thick for 40 mm dia. |
| 18 | (b)40 mm dia. G.I. Bend x 900/M |
| 19 | Supply & delivery of 32 Amp. SPN Main Switch (HAVELL\"s) |
| 20 | Supply and delivery of control panel made of 16 SWG M.S. sheet phosphate powder Dust & Vermin proof consist of following ( internal wing complete).(i) 40 mm dia. (M) |
| 21 | Supply and delivery of G.M. Non return valve of 40 mm dia. of ISI mark. |
| 22 | Installation of main switch & control panel including making electrical connection complete by supplying all requisite materials as per direction of E.I.C. |
| 23 | Earthwork in excavation in foundation trenches or drain in all sorts of soil (including mixed soil but excluding laterite or sand stone) icluding removing, spreading & stacking the spoil within a lead of 75m as directed. The item includes necessary trimming the sides of trenches. Levelling, dressing and ramming the bottom, bailing out of water as required complete.(a) Depth of excavation not exceeding 1500 mm. |
| 24 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidatating same by through saturation with water ramming complete ,including the cost of supply of sand.(Payment to be made on measurement of finished quantity)(a) Fine sand |
| 25 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 26 | Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor(A) [Pakur Variety](a) 1:3:6 proportion |
| 27 | Hire and labour charges for shuttering with centering and necessary stagingupto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge. |
| 28 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes.iii) RajMahal |
| 29 | Reinforcement for reinforced concrete work in the all sorts of stuctures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if ecessary),cutting to requisite length, hooking, and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild steel.(I) SAIL/TATA/RINL. |
| 30 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (c) 15 mm thick plaster |
| 31 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor |
| 32 | Supplying P.V.C. water storage tank of approved quality with closed top. ( a) 1000 Lit Capicity |
| 33 | M.S. vertical iron treatment plant of dia 400 mm X 1700 mm height with filtermedia and charged media fine gravels with all pipe fitting & fixingcomplete in all respect and 5.00 no of valve used ….. With ISI marks and as per direction of E.I.C. |
| 34 | Quatation fee for W.B.S.E.D.C.L Connection |
| 35 | Providing and Display Board at Site an taking three stages of works\"s Photographs etc. complete ….. |
| 36 | GST @ 18% |
| 37 | Cess @ 1% |
| 38 | Contingency |
AI Tender Summary
Tender Timeline
May 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender