Municipal Bodies-agecode007 has published Tender For Completion Of Childrens Park Near Papakshya At Binka ( Trench Between Two Park And Deep Bore Well). Submission Date for this Tender is 17-05-2023. Gardening Tenders in Sonepur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | A.(Trench Between Two Park) Earth work in hard soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 2 | Filling in foundation & plinth/road surface with clean coarse river sand including watering & rammingwith all lead labour T&P charges etc.required (only consolidated volum shall be taken for payment) including supplying of all materials, labour & T&P with cost, conveyance, royalty, texes etc all complete as per specification & direction of Engineer in charge. |
| 3 | Providing Cement Concrete of prop.(1:4:8) 40mm size crusher broken metal including lowering,laying the concrete & curing, etc. compacting to required depth & levels, including supply of all materials, labour, T&P required for the work including cost, conveyance, royalities & all taxes of all materials etc. complete as per drawing specification & direction of Engineer-in-charge. |
| 4 | R.C.C. M25 with 20mm & down grade size CBHG chipsincluding lowering laying the concrete and curing etc. compacting to required depth & levels, including supply of all materials labour T&P required for the work wirh cost, conveyance royalty taxes but excluding cost and labour charges of M.S. reinforcement etc. all complete as per direction of E.I.C. Base Raft |
| 5 | RCC Wall |
| 6 | Supplying fitting and fixing of HYSD Bar reinforcement includingcost & conveyance of all material to site with all complete as per technical specification and direction of EIC. |
| 7 | Supplying fitting & fixing of M.S. grill gatemade of flat and angle including welding as required and fixing in position including all cost of materials and cost of labour etc. complete as directed by E.I.C. |
| 8 | B. DEEP BORE WELL ( 125 x 100 mm size) Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). Labour for drilling of 125x100 mm dia bore (0 mtr to 60 mtr.) |
| 9 | Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground leveland fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixingall jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. Lowering of 125mm dia PVC casing pipes.(Sch-80)0 mtr to 30 mtr. |
| 10 | Cost of 200mm dia PVC pipe -80 schedule. |
| 11 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate dischrge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig |
| 12 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell all as per requirement and direction of Engineer-in-charge. 125 mm dia |
| 13 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of borewell as per IS: 2800 (part I), including necessary bolts & nuts of required size all complete for borewell all as per requirement and direction of Engineer-in-charge. 125 mm Clamp |
| 14 | Supply fitting fixing of 1.0 HP Vertical Submersible pump motor having 95 to 71head, 5.0 to 6.0 m³/hr (make-KSB/C&S/Crompton/ BCH) (1 No Run and1 No Stand by) |
| 15 | Supply fitting fixing of 2.00to 3.00 HP Starter with 3-Position Selection (with Auto Switch) (make-KSB/C&S/Crompton/ BCH) |
| 16 | Supply fitting and fixing of 100Amp 3 pole with neutral link, 415 V,50Hz main switch(Make-Havells/ Anchor/ C&S/ISI) |
| 17 | Supply of 1½"(40MM) Heavy PVC Column Pipe 3 mtr Long (Make-Falcon/Plasto/ISI/ASTRAL) |
| 18 | Supply of 1½"CI TOP & SS BOTTOM Adaptor (Make-Falcon/Plasto/ISI/ASTRAL) |
| 19 | Supply of 40mm dia GI Flange |
| 20 | Supply of 40mm dia GI long Bend (male Threaded |
| 21 | Supply of 40mm dia GI 1½"" x 6"" short piece |
| 22 | Supply of 4.0mm2 3 core copper flate cable (make-Havell"s/C&S/Finolex) |
| 23 | Labour Charges for lowering of 1.5.0 to 3.00 HP vertical Submersible Motor pump with 1½"(40MM) Heavy PVC Column Pipe 3 mtr Longat different pump house as per Direction of Engineerin Charge. |
| 24 | Provision for Photograph (Prestage/middle stage/Final stage), Display board & unforeseen item. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
