Construction Of Sakav At.Babdane Wada, In V.P.Borgaon, Tal.Khalapur
Tender Value
20 Lakhs
Estimated cost
Bid Submission
22 May 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khalapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sakav At.Babdane Wada, In V.P.Borgaon, Tal.Khalapur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directedetc. complete. ( By /manaual Means )a) Upto 1.50m lift Normal Rate |
| 2 | Item No 2-Excavation for foundationin hard murum and boulders including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.a) Upto 1.50m lift Normal Rate |
| 3 | Item No 3 - Excavation for foundation in hard rock by chiselling and wedging or line drilling including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.a) Upto 1.50m lift Normal Rate |
| 4 | Item No 4 - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with CM 1:1 proportion etc. complete. |
| 5 | Item No 5 – Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 6 | Item No 6 - Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete. |
| 7 | Item No 7- Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural /artifical sand) |
| 8 | Item No 8 - Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \"V\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steelform work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in chargebasic rate shall be increased for height above 5..00 m in followinh manners b) Height upto 5 M. (With Batch Mix Plant)With fully automatic micro processor based PLC with SCADA enable with fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. |
| 9 | Item No 9 - Providing and laying in situ / ready mix controlled M-20 cement concrete ofof trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete( Excluding reinforcement)With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 10 | Item No 10 - Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 11 | Item No 11 - Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcementetc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. |
| 12 | Item No 12 - Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 13 | Item No 13 - Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 14 | Item No 14 - Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 15 | Item No 15 - Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 16 | Item No 16 - Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete( Material obtained from Other sources) |
| 17 | Item No 17 - Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paveron prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material |
| 18 | Item No 18 - Providing and fixing Guard Railing of 1000 mm height in 25mm M.S. square bars 100 mm C/c. as per Type drawing No. 6 dt. 20-8- 85 and fixed in 50mm x 50mm x 6mm iron angle embedded in 1:2:4 C.C. bedding 55 x 45 cm and 50 x 6 iron patti as per detailed drawing with 3 coats of approved yellow and black paint. |
| 19 | Item No 19 - Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneissmetalforbedblocks,foundationblocksand suchotheritems includingbailingoutwater, Steelcentering,formwork,laying/pumping,compacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfullyautomaticmicro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 20 | Item No 20 - Providing and fixing 45 cm x 60 cm Marble plate including engraving 10 cm height letter ,figuresincluding painting the letters/figures with aoved colourand shadeetc. complete. |
| 21 | Item No 21 - Testing charges for Test Results A) Sand - Silt and Clay Content |
| 22 | Item No 21 - Testing charges for Test Results B)Cement |
| 23 | Item No 21 - Testing charges for Test Results C) C.C.Cubes - Comp Strength |
| 24 | Item No 21 - Testing charges for Test Results D) Metal |
| 25 | Item No 22 - Add for Royalty Charges A) Sand |
| 26 | Item No 22 - Add for Royalty Charges B) Other Minerals |
| 27 | Item No 23 - Add 0.50 % for Work Insurance |
| 28 | Item No 24 - Add 18 % for G.S.T.Charges |
| 29 | Item No 25- Add 1 % for S.Q.m Charges |
AI Tender Summary
Tender Timeline
May 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender