Supply Of C.I. / C.S. Casted Item , C.I. Casted Items For Boiler Furnace, New Basis Working Temprature 1400ºc Chemical Composition Of Material - C-2.8 To 3.2% Si- 0.5 To 0.7% Mg.- 0.6 To 0.85% Cr- 0.5 To 0.7% Ni- 0.45 To 0.85% Sulphur- 0.12% Pb ( Lead ) - 0.035% Cu- 0.12 To 0.20% , C.I. Tyyor For Boiler Drg. No.-Wtb-116-Fig No. 1 , C.I. Tyyor For Boiler Drg. No.-Wtb-116-Fig No. 2 , C.I. Clit Difrent Type , C.I. Clit For Boiler Furnace Arch Bird Type , C.I. Hanger As Per Drawing / Sample / Sketch Fig No. 1 & 2 Appx. Weight Fig No-01-25 Kg, Fig No-02-28 Kg As Per Ibr Quality , C.I. Hanger As Per Sample / Drawing / Sketch Fig No-01-25Kg, Fig No-2-10Kg, Fig No-03-30Kg, Fig No-4-42 Kg As Per Ibr Quality Fig. No. 1, 2, 3, 4 , C. I. Boiler Door With Frame Duly Machined As Per Drawing No. Ksc / Boiler-9290 App. Weight 1250 Kgs. To Be Supplied On As Per Ibr Quality , C.I. Feed Pocket For Baggass Furnace ( Drawing No Ksc / Wtb / 1410 ) App. Weight 350 Kgs. As Per Ibr Quality , Other C.I. Casted Items , C.I. Idler For Cane Carrier ( I ) As Per Drawing No. Ksc / Cc1 / 4 / 17 , C.I. Pulley ( As Per Drawing ) With Machining , C.I. Coupling Different Size ( As Per Drawing ) , C.I. Casting Various Size ( Gulla ) As Per Drawing With Rough Machining. Different Size , C.I. Casted Items For Boiler Furnace, On Conversion Basis Working Temprature 1400ºc Chemical Composition Of Material - C-2.8 To 3.2% Si- 0.5 To 0.7% Mg.- 0.6 To 0.85% Cr- 0.5 To 0.7% Ni- 0.45 To 0.85% Sulphur- 0.12% Pb ( Lead ) - 0.035% Cu- 0.12 To 0.20% , C.I. Tyyor For Boiler Drg. No.-Wtb-116-Fig No. 1 , C.I. Tyyor For Boiler Drg. No.-Wtb-116-Fig No. 2 , C.I. Clit Difrent Type , C.I. Clit For Boiler Furnace Arch Bird Type , C.I. Hanger As Per Drawing / Sample / Sketch Fig No. 1 & 2 Appx. Weight Fig No-01-25 Kg, Fig No-02-28 Kg As Per Ibr Quality , C.I. Hanger As Per Sample / Drawing / Sketch Fig No-01-25Kg, Fig No-2-10Kg, Fig No-03-30Kg, Fig No-4-42 Kg As Per Ibr Quality Fig. No. 1, 2, 3, 4 , C. I. Boiler Door With Frame Duly Machined As Per Drawing No. Ksc / Boiler-9290 App. Weight 1250 Kgs. To Be Supplied On As Per Ibr Quality , C.I. Feed Pocket For Baggass Furnace ( Drawing No Ksc / Wtb / 1410 ) App. Weight 350 Kgs. As Per Ibr Quality , Other C.I. Casted Items , C.I. Idler For Cane Carrier ( I ) As Per Drawing No. Ksc / Cc1 / 4 / 17 , C.I. Pulley ( As Per Drawing ) With Machining , C.I. Coupling Difrent Size ( As Per Drawing ) , C.I. Casting Various Size ( Gulla ) As Per Drawing With Rough Machining. Different Size , Cast Steel Spur Gear & Pinion New Basis , Cast Steel & Spur Gear- 72 Teeth Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70Mm, Bore- 45Mmod- 166.4 Mm, Module- 6.4-Approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch As Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc / Mh / 91618 Approx Wt-190Kg Each , Cast Steel Trash Plate ( Lenth 1680 Mm ) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc / Mh / 285 / 22 , C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc / Unloader / 2 / 17.Approx Wt 185 Kg. , C.S Gear 68 Teeth, Module-6.14 Face Width-65Mm, O.D--430Mm Drg No.-Ksc / Unloder / 17 , C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc / Cr / 145 Approx.Wight-55Kg , C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8Drg. No.-Ksc / Unloder / 17 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc / M / 1565 ( Tail End ) Material 2708 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc / M / 1564 ( Driving Shaft ) Material 2708 , C.S.Sproket-36 Teeth For Duplex Chain 2 1 / 2 Pitch Material 2708 Drg No Ksc / Boiler-163 , C.S. Sprocket 17 Teeth For Duplex Chain 2 1 / 2 Pitch Material 2708 Drg No-Ksc / Mill / 4887 , Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od-208 Mm Bore-50Mm , C.S.Worm Shaft ( As Per Sample ) For Mill , C.S. Mill Coupling ( Weight 700Kg Approx ) As Per Drawing , C.S. Mill Crown Pinion 16 Teeth ( Weight 1500 Kg. ) As Per Drawing , Cast Steel Spur Gear & Pinion On Conversion Basis , Cast Steel & Spur Gear- 72 Teeth Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70Mm, Bore- 45Mmod- 166.4 Mm, Module- 6.4-Approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch As Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc / Mh / 91618 Approx Wt-190Kg Each , Cast Steel Trash Plate ( Lenth 1680 Mm ) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc / Mh / 285 / 22 , C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc / Unloader / 2 / 17.Approx Wt 185 Kg. , C.S Gear 68 Teeth, Module-6.14 Face Width-65Mm, O.D--430Mm Drg No.-Ksc / Unloder / 17 , C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc / Cr / 145 Approx.Wight-55Kg , C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc / Unloder / 17 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc / M / 1565 ( Tail End ) Material 2708 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc / M / 1564 ( Driving Shaft ) Material 2708 , C.S.Sproket-36 Teeth For Duplex Chain 2 1 / 2 Pitch Material 2708 Drg No Ksc / Boiler-163 , C.S. Sprocket 17 Teeth For Duplex Chain 2 1 / 2 Pitch Material 2708 Drg No-Ksc / Mill / 4887 , Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od- 208 Mm Bore-50Mm , C.S.Worm Shaft ( As Per Sample ) For Mill , C.S. Mill Coupling ( Weight 700Kg Approx ) As Per Drawing , C.S. Mill Crown Pinion 16 Teeth ( Weight 1500 Kg. ) As Per Drawing
