Fabrication And Installation Of New Twin Hull Barge At Damodarpur Major Rli Scheme Under Manikchak Block Under Malda-I ( A-M ) Sub Division Within Malda-I ( A-M ) Division, Malda Under Core Sector 2022-23 Programme.
Tender Value
11.76 Lakhs
Estimated cost
Bid Submission
22 May 2023
0 days left
EMD
23532
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manikchak → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication And Installation Of New Twin Hull Barge At Damodarpur Major Rli Scheme Under Manikchak Block Under Malda-I ( A-M ) Sub Division Within Malda-I ( A-M ) Division, Malda Under Core Sector 2022-23 Programme.
BOQ
| Sl. No. | Item Description |
| 1 | Patch/Doubling works complete with 5 mm M.S. plate including welding, gas cutting, fitting, fixing complete. (a) Cost of 5 mm M.S. plate including wastage due to cutting, including labour charges for straightening fitting, fixing in position. |
| 2 | Patch/Doubling works complete with 5 mm M.S. plate including welding, gas cutting, fitting, fixing complete. (b) Gas cutting to required size of 5 mm thick M.S. plate, N.S.C. channel etc. including labour charges, hire charges for all tools and plants. |
| 3 | Patch/Doubling works complete with 5 mm M.S. plate including welding, gas cutting, fitting, fixing complete. (c) Electric welding charges of 5 mm M.S. plate M.S. channels etc. and other member of the barge including hiring charges of all tools and plants. |
| 4 | Supply, fitting, fixing complete with fastner : (a) Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm dia. J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm end lap and one corrugation minimum side lap with 0.63 mm thick sheet in roof. ( payment to be made on area of finished work) ( CGI sheet to be supplied by contractor) |
| 5 | Supply, fitting, fixing complete with fastner : (b) G.I. sheet ridging with 225 mm end lapping fitted and fixed with necessary bolts and nuts screws, washers etc. complete with 0.60 mm sheets. 300mm lapping each way. |
| 6 | Supplying, fitting and fixing of B.R.C. net (75 mm × 25 mm × 10 swg) with nuts and bolts of the barge including gas cutting etc. |
| 7 | Supplying 1.5 mm (16 SWG) M.S. sheet fitted and fixed on one or both faces of M.S. bar etc. with point welding not more than 150 mm apart complete in all respect and including cost of labour and materials as per direction of Engineer-in-Charge. |
| 8 | Supplying, fitting & fixing of M.S. angle (Size : 45 mm × 45 mm × 6 mm) including gas cutting etc. |
| 9 | Supplying, fitting & fixing of M.S. flat bar40mm × 6 mm for straightening the B.R.C. netincluding gas cutting etc. |
| 10 | Supplying, fitting & fixing of B.R.C. net by (3/8)\" × 2\" M.S. bolts & nuts with washers with M.S. angles M.S. flat, M.S. sheets etc. and other members of the barge. |
| 11 | Supplying, fitting & fixing of B.R.C. net by (3/8)\" × 11/2\" M.S. bolts & nuts with washers with M.S. angles M.S. flat, M.S. sheets etc. and other members of the barge. |
| 12 | Supplying, fitting & fixing of B.R.C. net by (1/2)\" × 11/2\" M.S. bolts & nuts with washers with M.S. angles M.S. flat, M.S. sheets etc. and other members of the barge. |
| 13 | Supplying, fitting & fixing of B.R.C. net by (5/8)\" × 1 1/2\" M.S. bolts & nuts with washers with M.S. angles M.S. flat, M.S. sheets etc. and other members of the barge. |
| 14 | (a) Supplying, fitting and fixing of M.S. channel (Size 75 mm × 40 mm × 6 mm) for base of manhole cover including gas cutting. |
| 15 | (b) Drilling charges 12 mm dia hole for manhole cover plate and M.S. channel base. |
| 16 | (c) Supplying, fitting and fixing of (1/16)\" thickness rubber insertion sheet with 12 nos. drilling hole for watertight arrangement of manhole cover. |
| 17 | Chipping, scraping wire brushing and cleaning of the painted surface for keel, hull, frame, superstructure deck, fender both inside and outside as per direction of the Engineer-in-Charge. (a) Twin hull barge (total area 240 m2 approx.) |
| 18 | Cost of Doors (6\"-0\" × 3\"-0\") by point welding with B.R.C. net (75 mm × 25 mm × 10 SWG), 49 mm × 6 mm M.S. flat bar, 6\" hings 4 pcs. 10 \" hasp bolts - 2 nos. etc. complete as per direction of Engineer-in-Charge. |
| 19 | Supply, fitting, fixing complete of 1\" dia MS Rod for Plate welding of MS Plates of the Barge |
| 20 | Supplying, fitting & fixing of 25 mmG. I. Pipe for tie rod of the Barge. |
| 21 | PAINTINGS :Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 22 | (b) Paintingtwo coats (with any shade except white) with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on steel surface or other metal surface with super gloss (hi-gloss). |
| 23 | Installation of Diesele Engine Pump/ Motor Pump Sets of any make/brand for Maj. RLI on pump foundation over sal sleepetr including supplying , fitting fixing 2 nos 100 mm x 75mm x 600 mm long sal sleeper with nuts and bolts and grouting with 1 : 1.5:3 CC and making connection of suction Hose, foot Valve with necessary fittings at the inlet end of the water pump and fitting fixing of 90 deg MS priming bendsluice valve and delivery Hose with all necessary fittings at the delivery end of the water pump maintaining proper allignment & levelling mending cutting floor on the wall of pump have with necessary mending goods damages etc. complete as per direction of the EIC(pump sets and all accessories shall be supplied depattly Item No 15 A P.No 15 WRDD. |
| 24 | Supply & Installation of M.S chesis as per direction of E.I.C |
| 25 | Supplying, fitting and fixing including transportation of sign board for identifying the exact location of MAJOR RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base - Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C. |
| 26 | Transportation charges for carrying of all the materials, working devices etc. upto the scheme and back. |
| 27 | Hiring charges of surface area 8M*6M of Dockyard / Open shed with requisite facilities of construction of new Twin Hull barge for 30 days |
| 28 | Shifting of barge to the nearest river site form the workingplace and blocking of the barge by area clearance, earth cutting, winching, jacking, planking, block fixing and un-jacking tools and plants, all complete as per direction of the Engineer in charge |
| 29 | Hiring charges of Mechanised Country Boat for making arrangement for dragging and sailing through the river including fuel & Lubricants etc. all complete as per direction of E-I-C.02 (two) nos. country boat for 4 daysi.e. 2 no. boats x 4 days |
| 30 | Semi Skilled labour charges of Boatman for sailing purpose the Barge through the river including tools and plants all complete as per direction of the E.I.C. 03 (three) nos. Boatman for 4 daysi.e. 3 nos. Boatman x 4 days |
| 31 | Un-Skilled labour charges of Boatman for pulling the Barge with the help of 2 nos. winch machine/pulling and lifting machine from the bank of river and placing the same at safety placeincluding tools and plants all complete as per direction of the E.I.C. 12 (Twelve) nos. labour (each set) for 4 days i.e. 2 x 12 nos. labours x 4 days |
| 32 | Semi Skilled labour charges of Winch man for 2 nos. Gang Leader for 2 sets Winch Machine/Pulling and lifting machine to supervise the dragging works and arrangement at the time of operation of the work. i.e. 2 nos. Gang leader for 4 days |
| 33 | Add 18% GST |
| 34 | Add 1% Cess |
AI Tender Summary
Tender Timeline
May 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender