|
| 1 | Earth work excavation in Sand silt or other Loose soil wet sand or silt not under water light black cotton soil sandy loam ordinary soilexcept hard rock requiring blasting including shering and shuttering and bailingout water wherever necessary refilling the sides of foundation with excavated earth in layer of 15 Cm thick well rammed consolidated and depositing the surp less earth within compound in places shown by the departmental officers with all leads and lifts etc., complete.including benching formation of bunds breaking clods sectioning etc |
| 2 | Supplying and filling with m.sand in layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per SS7&24–V,VI(S4)8 |
| 3 | Plain cement concrete of mix 1 : 4 : 8 ( one cement , Four sand and Eight aggregates ) using 40 mm ISS HBG metal for foundation and flooring, including , dewatering, if found necessary, and laid in layers of not more than 15 cm thick, well rammed and consolidated, including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc. completed as per standard specification and as directed by departmental officials |
| 4 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 5 | Plastering with cement mortar (1:5) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 6 | Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. |
| 7 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 8 | Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. etc., complete complying with standard specification and as directed by the departmental officers |
| 9 | Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. |
| 10 | supply and delivery of 30HP fully Automatic Auto Transformer starter suitable for the motor offered floor mounting type air / oil cooled auto transformer starter with tapings at 50% ,65%,80% housed in robust steel chamber with arc and main contacts conforming to IS 8544 part iv and as amended there after for operation in AC three phase 50HZ |
| 11 | Supply and Delivery of 10SQ.MM pvc insulated and sheated 3 core flat type copper cable conforming to is 694/1990 and as amended thereafter |
| 12 | supply and delivery of 63mm dia class PN10 HDPE PIPES - PE100 AS PER IS4984/2016 Including all cost of material and conveyance to site etc |
| 13 | Supply and delivery of 150mm dia DI D/F Gate sluice valves resilient seated soft sealing gate valves with body bonnet of ductile cast iron of grade GGG 40 or equivalent grade wedge fully rubber lined with EPDM replaceable spindle nut without glaned packing and with 3-0 Ring protection on the shaft and seals of NBR and the valves should be with BS 5163-89/ISI 14846-2000/DIN 3202 F4 All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage |
| 14 | Manufaturing supply and delivery of DI D/F slanted seat swing check valve body of ductile cats iron of grade GGG 40 or equivalent grade with fully capsulated EPDM rubber where both faces can be used electrostatic epoxy power / liquild coating (EP-P) inside and outside clor bule RAL 5005 with minimum coating thickness of 250 microns the EPDM rubber and epoxy power should be approve dby W 270 it is a resi-coat power approved for drinking water application applied through it is a resi-coat power should be casted components eated up to 200 deg C |
