Tender For Relaying Of Bt Surface To Baranar Street Unicode 020015R409 In Ward No 15 At Maraimalai Nagar Municipality, maraimalai-Tamil Nadu

Relaying Of Bt Surface To Baranar Street Unicode 020015R409 In Ward No 15 At Maraimalai Nagar Municipality , Charges For Cutting The B.T Surface To 5 To 7 Cm Depth Using Milling Machine, Conveying The Milled Waste Materials To At Least For 20 Km Distance Including Hire And Running Charges For The Machine, Conveyance Charges, Unloading At Unobjectionable Place, Cleaning The Milled Surface As To Avoid Slippery Including All Other Incidental And Unforeseen Item Etc. Complete As Per The Direction Of The Departmental Officers , Providing And Laying Tack Coat Of 2Kgs/10 Sqm Over The Bt Surface Treated With Binder Using 2Kgs Of Bituminous Emulsion (Rs)For 10Square Meter Area Including Cost Of Bituminous Binder, Including Labour Charges For Applying The Required Quantity Of Bituminous Binder As Tack Coat Manually Etc., Complete As Per 503 Of Morth Specifications , Advance Patch Work 13.20Mmproviding Advancve Patch Work Using 50Mm Consolidated Thickness By Using 1 M3 Of 13.20Mm Irc Metal With 44Kg Of Bittumen Per 1 M3 Of Metal For Pre Mixing For Existing Surface Advance Patch Work Including Cost And Conveyance Of Materials To The Work Site And Stacking Them To The Departmental Metric Guage For The Premeasurement, Heating The Bitumen In Bitumen Boiler, Heating The Aggregates And Mixing Them With Bitumen In Mini Hot Mix Plant For Premix Carpet Only Rolling By 60-70Kn Power Roller For Premix Carpet And Seal Coat Seperately Including Labour Charges For Spreading The Mix For Premix Carpet Application Of Bitumen For Seal Coat Over Premix Carpet, Including Labourcharges For Spreading Seal Coat Seperately Over Premix Carpet Etc. Including Higher Charges And Fuel Charges For , Bitumen Boiler And All Other Tools And Plant Employed Etc. Complete As Per Of Morth Rev - V Specifications , Providing And Laying Bituminous Concrete To 30Mm Thickusing 0.13 Cum Of 19.00-9.50 Mm Graded Metal And 0.17 Cum Of 9.50-2.36 Mm Graded Metal And 0.26 Cum Of 2.36 Mm & Below Metal With45.27 Kgs Of 60/70Bitumen & 5.03Kg Of Plastic Waste (Total-50.30 Kg) Andfor Premixing Per 10 Sqmincluding Cost And Conveyance Of All Materials Toc M P Site, Heating The Bitumen And Agregates To Required Temperature And Mixing Them In Required Temperature In Central Hot Mix Plant 20- 30 Tonnes Capacity Conveying The Mix By Tipper Trucks To Paver Site, Spreading The Mix In Required Temperature For Uniform Thickness Of 40Mm/ 30Mm With Mechanical Paver To The Specified Grades And Cross Sections And Compaction Byvibratory Roller Tothe Required Density Etc.,Including Labour Charges For Loading Bitumen In To Bitumen Tank And Metal To Feeder Unit,Labour For Attending To Paver Site Etc., Including Hire Charges And Fuel Charges For 20-30Tc M P With Bitumen Boiler,Tipper Trucks, Paver Finisher, Vibratory Rollers And All Other Tools And Plants Required,Includingall Other Incidental Charges Etc.,Complete Using C M P Clause 507 Of Morth Rev-5 Specifications. , Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250Gms Per Sqm Area, Thickness Of 2.5Mm Exclusive Of Surface Applied Glass Beads As Per Irc:35. The Finished Surface To Be Level, Uniform And Free From Streaks And Holes Etc., Complete As Per Standard Specifications. , Providing And Fixing Reflective Road Studs Of Category B Raised Pavement Markers Made Out Of Poly Carbonate / Abs Moulded Body And Reflective Panels (Bi-Convex Reflectors) With Micro Prismatic Lens Capable Of Providing Total Nternal Reflection Of The Light Entering The Lens Face With Retro-Reflectance And Chromaticity Values Conforming To Astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Morth Circular No Rw / Nh.33023 / 10 / 97-Do.Iii Dt 11.06.97 And The Length, Height And Width Of The Body Shall Not Be Less Than 100 Mm, 15Mm And 90 Mm And Base Of Marker Shall Be Flat Within 1.3Mm. The Marker Shall Support A Load Of 13635 Kg Tested In Accordance With Astm D4280. Lenses Shall Be Moulded Of Polycarbonate Or Methyl Methecrylate Conforming To Astm D788. The Area Of Each Retro -Reflectory Surface Shall Not Be Less Than 13.0 Sq.Cm. The Slope Or Retro - Reflectory Surface Shall Be 35 + 5 Degree To Base. Each Reflector Shall Have A Cil Not Less Than Values Specified In Table 2 Of Said Mort&H Circular And Tow Eylindrical Polymer Shanks Of Not Less Than 20 Mm Diameter And Not Less Than 30 Mm Length Shall Be Provided For Better Anchorage.

Refer document

INR 8500.0 /-

INR 8.50 Lakhs /-