|
| 1 | Supply, stacking & spreading of 63mm to 45mm size stone aggregate. (Quary Crushed)Includingapplying stone screening of 13.20 mm size @16% & binding material @ 8% of total quantityincludingconsolidation with Power Road Roller with 8-10 Tonne capacity to required gradient and camber. Complete job as per relevant clause of MORTH specification including scarifying of damaged road surface toGeometricalsize. All inclusive with costs & carriages of all involvedmaterials upto site of work (Compacted quantity after deduction of voids) |
| 2 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density , complete as per specifications and directions of Engineer-in-Charge thickness 75mm compacted as per relevant clause of MORTH specificationsfinished measurement to be paid |
| 3 | Providing and applying tack coat using Hot stright run bitumen of grade VG-10 including heating the bitumen and spraying the bitumen with machnically operated spray unit fitted on bitumen boiler cleaning and preparing the existing road surface to remove all dirt, dust mud etc and finally brooming the surface as per relevent clause ofMORTH specifications on WBM / WMM surface @ 0.75 kg / Sqmincluding all leads, lifts, costs & carriages of materials involvedupto site of work complete job finished measurement to be paid |
| 4 | Providing and laying bituminous macadam using crushed stone aggregates of specified as per MORTH Specification grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 mm compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity including all leads, lifts, costs & carriages of all materials upto site of work, Hire charges oftools, plant, equipments & all allied machinary with cost oflabour, taxes, fee, testing charges for maintaining quality control during and after execution of work complete in all respectsas per relevent clause ofMORTH specifications finished measurement to be paid |
| 5 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading,as per MORTH Specifications, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.Finished Measurement to be paid. |
| 6 | P/L 6mm thick seal coat of premixed fine agg. (passing 2.36mm and retained on 180 micron sieve with bitumen 128Kg of bitumen of V.G 10 grade per Cum of fine agg. (0.768 Kg of bitumen/sqm) and 0.60 cum of fine agg. Per 100 sqm of road surface including rolling , to be laid by paver finisher and finishing the same with respect to as per relevent clause ofMORTH specifications including all leads,lifts, costs & carriages of all materials upto site of work,Hire charges oftools, plant, equipments & all allied machinary with cost oflabour taxes, fee, testing charges for maintaining quality control during and after execution of work complete in all respects. finished measurement to be paid |
| 7 | Taking of photographs ofsize 125mm x100mm pre Execution, DuringExucation and PostExecutionto be submitted with bill complete Job. Geo tagged photographs showingLongitude and latitude. |
