Patch Repair Work Of Various Road Under Sub Division Balesar
Tender Value
95 Lakhs
Estimated cost
Bid Submission
05 Jun 2023
0 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shergarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Patch Repair Work Of Various Road Under Sub Division Balesar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-May-2023 | date extension | Date | 19-May-2023 |
| 2 | 18-May-2023 | DATE EXTENSION | Date | 05-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearinggrass and removal of rubbish maximum 150mm in thickness upto a distance of 100 Mtr outside the periphery of the area by manual means . Note ; where only grass is met with , the area clear shall be measured & paid for under this item( MORTH clause 201 ) |
| 2 | Removal of Blown sand including taking out and disposal of excavated material with lead upto 50 m. & lift upto 1.5 m. disposed soil to be levelled & neatly dressed. |
| 3 | Providing and laying granular sub-base material having P.I.not more than 6, including spreading in layers not exceeding 150 mm compacted thicknessand consolidation by 8-10 tonne power rollerto required camber and grade including cost of water and hire charges of machinery, including T&P with all lead (Compacted thickness to be measured).as per MORTH specification table 400-1, 400-2 : For grading-III with CBR value not less than 20. to attain 100% proctor density. |
| 4 | Providing, laying, spreadingand compactingstone aggregate of specfic as per table 400-6 to Water Bound Macadam specification including spreading in uniform thickness, hand packing roll-ing with vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates watering (with water browser) and rolling making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specfication : Clause 404] ( By manual means). Grading II,53 mm to 22.4 mm, @ 0.91 cum per 10 Sqm for compacted thickness of 75 mm.(Crusher broken) |
| 5 | Filling pot-holes and patch repairs with open-graded premix surfacing, 20 mm with removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause 503, back filling the pot holes with hot bituminous material as per clause 511 usingbitumen mixed in hot mix plant 40-60 TPH capacity and carriage with all lead, compacting with 8-10 tonne smooth wheel roller, trunming & finishing the surface to form a smooth continous surface, all as per MORTH specification Clause 3004.2- do- VG-30 -do- |
| 6 | Providing & laying premixed seal coat on patch area comprising of thin application of fine aggregate (0.06 cum/10Sqm) premixed with 6.8 Kg./10 Sqm, binder VG-10 grade in approved hot mix plant and laying & rolling with power roller 8-10 tonne including all lead of mix material. |
| 7 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these including all leads and lifts and cost of arrangement of land, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammer to restore the original alignment levels & slopes complete as per MORTH specification Clause 3002. |
| 8 | Painting two coats after filling the surface with synthetic enamel paint in all shades on plastered concrete surfaces as per MORTH specifications Cl. 803. b) Old surface |
| 9 | White washing of parapets, kerbs, railings tree boundary stones, guard stones, guide stones and tree guards trees etc. complete. Old surface two coat. |
| 10 | Printing new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Hindi (Matras commas and the like not to be measured and paid for half letter shall be counted as half). |
| 11 | English and Roman Hyphens and the like not to be measured and paid for. |
| 12 | Painting & printing letters on kilometer stone with first quality synthetic enamel paint as per MoRTH specification clause 800. (B) Old Work5th Kilometer stone. |
| 13 | Ordinary Kilometer stone. |
| 14 | Providing and laying Coursed Rubble stone masonry in foundation upto a depth of 1.50 metres and also 1.50 metres above Ground /Bed level [MoRTH Specfication : Clause 1000/1400] Cement sand mortar 1:6 |
| 15 | Surveying on existing road to prepare plan L-section, X-Section and complete bituminous overlay quantity including compas survey at required points levelling at 10 m. interval for L-Section and 10 m. interval for X-Section upto desired width preparation and submission of plan, L-Section (1.0 Km. length) and X-Section in A-4 size showing various details like geometric data geometric improvement of H-Curves & V-Curves, habitation electric lines, water pipe line and special feature making sufficient bench marks in field to check the survey etc. complete as per direction of Engineer-in-charge. |
| 16 | Restoration work of Road Cutting of Bituminous Road including earth work, GSB, WMM , and Bituminous work complete For road cutting up to 1 m wide |
| 17 | Construction of a permanent type barricade made of wooden components, 1.5 m high from roadlevel, fitted with 3 horizontal planks 200 mm wide and 3.66 m long on 100 x 100 mm wooden vertical post, painted with yellow and white strips, 150 mm in width at an angle of 450, complete as per IRC :SP:55-2001. |
| 18 | Raised Pavment Marker ( Cats Eyes): Supplyingand Fixing of Molded Shank Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. The contractor shall submit 2 years pre qualified warranty certificate from the manufacturer for satisfactory field performance during the time of bid submission |
| 19 | Photo Copy work of All SizeA-4 Size |
| 20 | Supply & fixing of one side polished black granite/white marble stone 14-20 mm thick of size 3x2 with engraved and gold colour painted letters (upto 500 letters) & borders including soorsagar white stone pillers of size 0.15x0.15x2.1 mtr. With moulding, carving & making slot on pillars for fixing of granite stone including loading & unloading with all leads & lifts as per direction of Engineer Inchargre |
| 21 | Engraving Letters of any language/ design (Font) on Granit/ Marble/Other stone surface up to 1 mm depth and painting letters with enamel paint as per direction of engineer in charge ( Matras, Comma, Full stop, dash ets not to be measured and paid for, half letters to becounted as half, in Hindi) |
AI Tender Summary
Tender Timeline
May 18, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 19, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 05, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender