Name of Work :Supply and delivery of 7 Nos. Light CommercialVehicle ( LCV) E - Cart in Rajapalayam Municipality
Sl. No.
Item Description
1
Supply and delivery of 2cum capacity box Tipper Light Commercial Vehicle (LCV) including the Registration, Insurance & Taxand Providing audio equipments (Amplifier with USB facility, Horn speaker) with necessary wiring, switches for Door to Door Collection of Garbage in Solid waste as per the following technical specification 1) Displayment (CC) Engine capacity. - 700CC- 12502) Max power - 20-30BHP @ 2500 rmp and above3) Max Torque - 500NM@ 2000 rmp and apove4) Type of fuel - Diesel5) Load capacity - 2 cu.m6) Vehicle emission Norms - BS -VI7) No of cylinder in engine -2- 4 cylinder8) Length of chassi - 3800 mm - 3950 mm9) Width of chassis - 1500mm -1550 mm ground clearance. 150 mm - 165mm10) Fuel tank capacity- Diesel -30 Ltrs to 40 ltrs CNG -12-25Kg11) Size of tyres & No - 145R 12 - 5 No512) Wheel base-1900 mm -2250 mm13) Gross vehicle weight - 1500 kg -1900kg14) Clutch- single plat dry friction diaphragm 15) Transmission system- Manual16) No of speed / forward gears - 4 Nospeeds (4F +1R)17) Type of steering- Manual /power18)Speed Governors - Shall be fitted19) Pay load- 800kg to 1000kg 20) Tipper bodylength- 2100 mm-2200mm, Mild steel21) Tipper body width - 1400 mm -1500mm, Mild steel 22) Tipper body heigth- 750mm-950 mm, Mild steel 23) Side portion (LH & RH ) & rear doors sheet including frame sheet thinkness - 1.6mm, Mild sheet24) Tipper body top sheetincluding frame sheet thickness - 1.6mm, Mild sheel25) Tipper body Top Lid sheet thickness- 1.2mm, Mild steel26) Tipper container- Tipper contanier should be fabricated with two doorson the rear side and four doors on four top corners of the containers with hinge and locking system. A partition should be provided on the middle of container along the vertical length of the body 27) Tipper body Top lid main sheet thickness- 75+40+60 mm28) Hydraulic cylinder make - Reputed make29) Hydraulic cylinder driven - Main Engin30) Pump make - As per IS standard31) Painting - should be painted with one coat of Anti-corrosive epoxy primer and two coats of enarnal paints for approved quality to ensure long lasting resistance for weartherizingand breakage .The color shade should be as per norms 32) Lettering- To be carried out as directed by dept officers 33) Tipper body rear door - shall be with necessary locking facility34) Side safety guard -Shall b provided as per RTO requirement35) Additional conditions -vehicle with fuel sensor and GPS tracking 36) Warranty distance /year -25000KM/12 months whichever is earlier.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
