|
| 1 | Dismantling the existing damaged plain cement concrete flooring including removel of deprices from site etc., complete as diercted by the dept officers. |
| 2 | Dismantling the existing damaged Brick masonery in CM including removel of deprices from site etc., complete as diercted by the dept officers. |
| 3 | Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24VI (S2) VII.9,10 |
| 4 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Brick work In CM 1:5 mix using best country bricks of size 8 3/4 x 4 1/4 x 2 3/4\"having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming toISI specifications.and using the screenedsandand all the materials should be approved by the competent technical authorities etc complete complying with standard specification--10m3 |
| 6 | Damp proof course with Cement Mortar 1:4 (One Cement and Four plastering sand (P - Sand)) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification. |
| 7 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 8 | STEEL DOOR WITH FRAME (SINGLE LEAF) |
| 9 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC worksas per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. |
| 10 | Reinforced cement concrete in 1:11/2:3[one cement and one and half sand and fourtheaggregate ] using 20 mm size IRC grade machine crushed chips and excludingcost of reinforcement and centering works and including the cost of mixing,laying , curing ,and etc.,complete complying with standard specification . |
| 11 | Supplying and erecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing 90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification . |
| 12 | Supplying and fixing in position Indian water closet ofsize 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition withoutleakage etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works.) |
| 13 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 14 | Dadooing the sides of walls for 1.50m height from the flooring with glazed square tiles 15cm x 15cm x 6mmof best quality and colourand set in cement mortar 1:2mix and pointing with white cement nearly as directed over the plastered surface of 3m betweenfinished surface of dadooing and the plastered surfaceof walls-10m2SI NO 261-A |
| 15 | Cement concrete in 1:2:4 [one cement and two sand and four aggregate ] using20 mm size ISS grade machine crushed chips including the cost of mixinglaying curing etc., complete complying with standard specification. |
| 16 | Paintinting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification- 10m2 |
| 17 | white washing two coats using best shellime and preparing the surfacefit for white washing as confirming to the IS 6278-1971--100m2 |
| 18 | colour washing two coats using best colouring pigments--10m2 |
| 19 | Supply and delivery of following GI pipes and specials etc. |
| 20 | 20mmGIpipe |
| 21 | 20mm GI union |
| 22 | 20mmGI elbow |
| 23 | 20mm GI Tee |
| 24 | 20mm GIhex nipple |
| 25 | C.I.Footvalve with stainer |
| 26 | 20mm GM gate valve |
| 27 | 20mm stop cock |
| 28 | 20mm GI coupling |
| 29 | G.I. Reduced Elbow Plain |
| 30 | PVC screw down tap Heavy type 15mm dia |
| 31 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) |
| 32 | Supply and fixing of 11W CFL for BH point |
