}

Tender For Repair To Flooring, Tiling, Plastering And Allied Work In Other Than Mh Area Under Ge (U) E/M Meerut Cantt., meerut-Uttar Pradesh

Military Engineer Services-MES has published Tender For Repair To Flooring, Tiling, Plastering And Allied Work In Other Than Mh Area Under Ge (U) E/M Meerut Cantt.. Submission Date for this Tender is 31-05-2023. Civil Work Tenders in meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

37515764
Corrigendum : Tender For Repair To Flooring, Tiling, Plastering And Allied Work In Other Than Mh Area Under Ge (U) E/M Meerut Cantt.
Open Tender
Indian
Uttar Pradesh
meerut
31-05-2023

Tender Details

Repair To Flooring, Tiling, Plastering And Allied Work In Other Than Mh Area Under Ge (U) E/M Meerut Cantt.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 24-May-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 31-05-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 50000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR TO FLOORING, TILING, PLASTERING AND ALLIED WORK IN OTHER THAN MH AREA UNDER GE (U) E/M MEERUT CANTT.
Sl. No. Item Description
1Demolition of brick work built in cement mortar including all arches, pillars all quoinsetc complete all as directed.
2Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.
3Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.
4Demolition ofconcrete ( un reinforced ) in ground floors and paving exc 15 cm thk (below or above ground level)
5M&L forbrick work with fly ash bricks old size straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge
6Dittoas per srl item 05above but except brick.
7M&L 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base
8M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cuttingpolishing and rubbing complete.
9M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
10All as per item No09 above but on skirtings vertical surface incl 10 mm thick backing coat in CM (1:4) complete.
11M&L for vitrifiedcoloured ceramic tiles 10mm thick (square/rectangular) polished area dark shed of each tile exc. 0.18 sqm but n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete
12Ditto above item No 11 abovebut on skirting vertical surface including 10 mm thick backing coat in CM 1:4 complete.
13M&L for glazed coloured ceramic tiles350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4all as direced.
14M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection finished even and fair .
15Taking down cement plaster of any description from brick or stone wall etc incl raking out joints and hacking for key, scrubbing down with water etc complete.
16M&L for rendering 10 mm thick ready mix plastering n fair faces of brick walls finished even and smooth w/o using extra cement.
17M&L for rendering 15 mm thick ready mix plastering on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.
18M&L for 15 mm thick rendering in cement mortar 1:4 on external surfaces of Chajja facia including taking down of Ground floor complete all as specified.
19M&L for 15 mm thick rendering in cement mortar 1:4 on external surfaces of 1st floor Chajja facia including taking down complete all as specified.
20M&L for prepartion of newly plastered surface of wallapplying two coats of weatherproof paint with 1mm thick putty on external surfaces includinga coat of alkali resistant priming paint complete all as specified.
21M&L 5mm thick rendering ready mix plastering to concrete surfaces as in ceiling finished even and smooth without using extra cement in patches complete all as specified & directed by Engineer-in-Charge.
22M&L three coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.
23M&L for preparing new plastered surfaces & applying two coats of cement base paint on wallscomplete all as specified. .
24M&L for preparation of new plasteredsurfaces of wall & applying two coats of oil emulsion distemper over a coat of prime with 1mm thick wall care putty complete all as soecified.
25M&l Complete removal of existing treatment of painted surfacesand priming with alkalie resistant priming paint& applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.
26Preparing surface and apply 1mm wall care putty on wall surfacecomplete all as specified & as directed.
27M & L complete removal of existing treatment of painted surfaces and applying two coats ofcement paint complete all as specified and directed.
28Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/dry distemper /oil bound distemper/enamel paint) and making the wall surfaces smooth and applying one coat of cement primer and two coat of apex weather proof exterior grade emulsion (asian paint) complete all as specified and directed by Engr -in-charge
29M&L 100 mm thick cement concrete type D-2 (1:4:8) (40mm graded aggregate) as sub base of floorall as specified
30M&L 75 mm thick cement concrete type B-2 (1:2:4) (40 mm graded aggregate) as in surface finish all as specified
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail