Tender For Construction Of New Toilet Building And Providing Paver Block @Tnhb Municipal Middle School Ward No.39 In Kancheepuram Corpoation
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
09 May 2023
0 days left
EMD
9700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kancheepuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Toilet Building And Providing Paver Block @Tnhb Municipal Middle School Ward No.39 In Kancheepuram Corpoation
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton shales murrums hard red earth etc with all lead and lift and depositing on banks asper SS20 B etc complete Column |
| 2 | Grade Beam |
| 3 | Supplying and filling in foundation andbasement with filling Crusher Dustin layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 4 | PlainCement Concrete 1:4:8 mix (One Cement, Four crushed stone sand and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28). |
| 5 | Providing centering and shuttering works using MS sheet moulds and soffits with including cost and conveyance of all materials and including all labour charges etc complete Column |
| 6 | Grade Beam |
| 7 | slab |
| 8 | Reinforced cement concrete 1:1,5:3 mix using 20 mm HBG ISS metal with including cost and conveyance of all materials and including all labour charges etc complete |
| 9 | Supply and fabrication of steel using TMT & RTS bars with including cost and conveyance of all materials and including all labour charges etc complete |
| 10 | Brick work in CM 1:5 (one cement & five sand) using II nd class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing,etc., complete complying with standard specification |
| 11 | Plastering in C.M 1:3-10 mm thick with including cost and conveyance of all materials and including all labour charges etc complete |
| 12 | Plastering in C.M 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete |
| 13 | Paintingtwo coats using Emulsionpaintusing one coat of primer with including cost and conveyance of all materials and including all labour charges etc complete as per specification |
| 14 | Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame.Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18 G CR Sheets of best quality is laid as panel in the shutter frames.18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity.Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter.300mm length of hinges 2 Nos, for shtter is provided.6 Nos.of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided.250x16mm size of Two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of M.S. handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing.All members are given one coat of red oxide primer as directed by the departmental officers.The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete. (Single Leaf) |
| 15 | Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 16 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 17 | Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed |
| 18 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 19 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 20 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVCrigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flushwith wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour forPVC open light point / fan point (For electronic regulator) |
| 21 | Supply and fixing of single box type 4 feet 36 W flu.fitting with electronic choke and condensor with TW round blocks on wall or ceiling with fl.tube with PVC unsheathed copper leads etc as per |
| 22 | Supply and run off 2 of 6 sqmm PVc insulated Sc unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continious earth wie connection etc as pe |
| 23 | Supply and fixning of TNEB meter board suitable for 32 A single phase service connection with 32 A Fuse unit (500V)32 A nutral linkand earth link (1\"x1/8\"copper plate ) on TW plank of size 375mmx300mm x19mm with support TW reepersof 1\" thickan either side with painting etc complete |
| 24 | Supply and fixng of 32 A DP switch of 500 V with metal clad with fuse and neutral(side handle)on suitable TW board with PWD earthing |
| 25 | Supply and fixing of following PVC pipe 6Kg/cm2 and PVC specials including cost of all materials and labour charges for fixing etc complete as per standard specfication PVC 110mm dia pipe |
| 26 | Providing Well Graval to the required surface using quarry rubbish including cost of material and cost of labour for stacking,spreading and consolidating layer by layer (Each layer not exceeding 100mm ) including hire charges of Roller etc,complete as per the direction of Departmental officers.as per MORTH Rev V 401 |
| 27 | Supplying and laying Rubberised interlocking Paver block 63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 28 | Engaging the Hire charges for daily wages including cost and conveyance of all labour charges etc., complete Manson I Class |
| 29 | Engaging the Hire charges for daily wages including cost and conveyance of all labour charges etc., complete Manson II Class |
| 30 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 31 | Supply and Delivery of PVC Pipes and Specials of working pressure of 10 kg.per sq.cm. FINOLEX Pipes90mm PVC pipe |
| 32 | PVC Bend |
| 33 | Supply and fixing of 100mm x 75mm PVC Nahini / Floor Trap with PVC Grating including cost of all materials and labour charges etc complete PWD Sor Pg.No.51 |
| 34 | Providing rain water harvesting using 6 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 8mm dia MS rod vertically and 3 No. of 8mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1.2m dia toa depth of 2.1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects. (As per DATA) |
AI Tender Summary
Tender Timeline
May 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender