Tender For Providing New Bore Well With Mini Power Pump And Water Supply Arrengements At Akt Higer Secondary School Ward No.32 In Kancheepuram Corporation
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
09 May 2023
0 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kancheepuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing New Bore Well With Mini Power Pump And Water Supply Arrengements At Akt Higer Secondary School Ward No.32 In Kancheepuram Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Conducting physical survey for identification of suitable location for borewell including theloading, unloading and transporting charges for machineries etc., complete as per standard spedifications. |
| 2 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. Upto 60 Mtr Upto 60 m Depth ending below ground level |
| 3 | From 60 m upto 90 m Depth ending from ground level |
| 4 | From 90 m upto 120 m Depth ending from ground level |
| 5 | From 120 m upto 150 m Depth ending from ground level |
| 6 | Supply of 150mm dia PVC casing pipe withincluding cost and conveyance of pipes to work site and all handling charges etc complete 150mm CM Pipe |
| 7 | Supply of 150mm dia PVC casing pipe withincluding cost and conveyance of pipes to work site and all handling charges etc complete150mm RS Pipe (Slotted Pipe) |
| 8 | Supply of 200mm dia PVC casing pipe withincluding cost and conveyance of pipes to work site and all handling charges etc complete200mm CS Pipe (Covering Pipe) |
| 9 | Labour Charges for inserting 150mm PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of TWAD Board. Pg.No.304 |
| 10 | Supply of PVC insulated and sheathed 3 core 4.00 sq.mm flat type copper cable conforming to is 694/1990 and as amended thereafter TWAD SOR Pg.No.120 |
| 11 | Supply and delivery of clear water vertical wet type three phase submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %.3HP - 100 x 50 Lpm |
| 12 | Supply and delivery of direct online starter three phase panel board - D.O.L with two level guard and auto start confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).3HP - Panel Board |
| 13 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 daysUpto 5.00 HP |
| 14 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 15 | Supply and delivery of UPVC & GI Pipe and specials and other jointing materials and including cost and conveyance to work site and handling labour charges etc complete 32mm UPVC Column Pipe |
| 16 | 50mm GI Pipe |
| 17 | 32mm PVC Bend |
| 18 | 32mm x 50mm GI Reducer (Heavy) |
| 19 | 50mm GI Bend |
| 20 | 50mm GI Elbow |
| 21 | 50mm GI Coupling |
| 22 | 50mm GI Tee |
| 23 | 50mm GI Hex Nipple |
| 24 | 50mm M.S. Clampset |
| 25 | 50mm x 32mm Unequal Tee |
| 26 | 32mm G.M. Gate Valve |
| 27 | 6\" Bore Cap |
| 28 | Adaptor Set |
| 29 | SD Tap |
| 30 | Nylon Rope for Borewell |
| 31 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70 |
| 32 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour SD 56 |
| 33 | Supply and Delivery of 600 x 600mm SFRC Manhole with Frames including all materials and labour charges etc complete., |
AI Tender Summary
Tender Timeline
May 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender