Tender For 15Th Cfc 2022-23-Tied Grant- Supply And Delivery Of Light Commercial Vehicle -6 Nos In Chinnamanur Municipality, Theni Dist

Sharing tender

15Th Cfc 2022-23-Tied Grant- Supply And Delivery Of Light Commercial Vehicle -6 Nos In Chinnamanur Municipality, Theni Dist , Supply And Delivery Of 2Cum Capacity Box Tipper Light Commercial Vehicle (Lcv) Including Cost Of The Registration, Insurance & Tax And Providing Audio Equipments (Amplifier With Usb Facility, Horn Speaker) With Necessary Wiring, Switches For Door To Door Collection Of Garbage For Solid Waste As Per Thefollowing Technical Specifications. Displacement (Cc) / Engine Capacity : 700 Cc – 1250 Cc Max Power : 20-30 Bhp @ 2500 Rpm And Above Max Torque: 500 Nm @ 2000 Rpm And Above Type Of Fuel: Diesel Load Capacity: 2 Cu.M Vehicle Emission Norms: Bs –Vi No Of Cylinder In Engine : 2- 4 Cylinder Fuel Tank Capacity : 30 Ltrs To 40 Ltrs Cng -12-25 Kg Length Of Chassis : 3800 Mm- 3950 Mm Width Of Chassis &Ground Clearance: 1500 Mm – 1550 Mm & 150Mm -165 Mm Wheel Base : 1900 Mm – 2250 Mm Gross Vehicle Weight : 1550 Kg -1900 Kg Size Of Tyres & Nos. : 145 R 12 – 5 Nos. Chassis Transmission System : Manual Clutch: Single Plate Dry Friction Diaphragm , No Of Speed / Forward Gears : 4 Nos. Speeds (4F+1R) Type Of Steering: Manual / Power Speed Governers : Shall Be Fitted Pay Load: 800 Kg To 1000 Kg Tipper Body Length : 2100 Mm – 2200 Mm Mild Steel Tipper Body Width : 1400 Mm - 1500 Mm Mild Steel Tipper Body Height: 750 Mm – 950 Mm Mild Steel Side Portion (Lh &Rh) & Rear Doors Sheet Thickness: 2 Mm, Mild Steel Tipper Body Top Sheet Including Grame Sheet Thickness: 1.6Mm, Mild Steeltipper Body Top Lid Sheet Thickness: 1.2Mm, Mild Steel Tipping Hydraulic Cylinder Make : Reputed Make Hydraulic System Driven By : Main Engine Pump Make: As Per Is Standard Painting: Should Be Painted With One Coat Of Anti-Corrosive Epoxy Primer And Two Coats Of Enamel Paint For Approved Quality To Ensure Long Lasting Resistance For Weatherizing And Breakage. The Color Shade Should Be As Per Norms. , Tipper Container Material : Tipper Container Should Be Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containers With Hinges And Locking System. A Partition Should Be Provided On The Middle Of Container Along The Vertical Length Of The Body. Tipper Body Top Lid Main Sheet Thickness: 75 X 40 X 6 Mm Lettering : To Be Carried Out As Directed By Dept Officers. Tipper Body Rear Door : Shall Bewith Necessary Locking Facility. Side Safety Guard: Shall Be Provided As Per Rto Requirement Additional Conditions: Vehicle With Fuel Sensor And Gps Tracking Warranty Distance / Year: 25000Km/12 Months Whichever Is Earlier.