|
| 1 | Note :- Repair/ Maintenance/ updating including operation and regular maintenance of the Automatic water supply system shall be carried out through Original Equipment Manufacturer (OEM) i.e. M/S Recktronic Devices & Systems or through their authorized agent. The contractor shall submit documentary proof/evidence in this regard before execution of Work. In case of authorised agent, MoU documents of authorization shall be provided before execution of work. |
| 2 | Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipes, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 3 | Returning, filling in trenches, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed. |
| 4 | Removing excavated surplus soil to a distance not exceeding 50 mtsand depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed. |
| 5 | Taking up or down old rusted/ worn out GItubing & connections of 15 mm bore fixed in any position and S&F new 15 mm bore galvanized steel water tubing medium grade (ISI Marked) with & including all necessary fittings (ISI Marked) such as bend, tee, elbow, etc laid in trenches/ floors or fixed on wall and ceiling complete all as specified and as directed. Note : Excavation & earthwork shall be measured & paid for separately. |
| 6 | All as per serial item No. 4 here in above but 20 mm bore. |
| 7 | All as per serial item No. 4 here in above but 25 mm bore. |
| 8 | All as per serial item No. 4 here in above but 40 mm bore. |
| 9 | All as per serial item No. 4 here in above but 50 mm bore. |
| 10 | All as per serial item No. 4 here in above but 80 mm bore. |
| 11 | All as per serial item No. 4 here in above but 100 mm bore. |
| 12 | S&F in repairs 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe complete all as specified & as directed. |
| 13 | All as per item No. 11 here in above but 20 mm bore |
| 14 | All as per item No. 11 here in above but 25 mm bore |
| 15 | All as per item No. 11 here in above but 40 mm bore |
| 16 | All as per item No. 11 here in above but 50 mm bore |
| 17 | S&F MS fittings suitable for 80mm to 150mm pipes such as bends, tappers, etc any type and angle and straight connected pieces any type joint all flange ends includingnecessary cutting, welding, bending, drilling holes for bolts, in any shape or size as indicated or directed including necessary jointing materials such as nut, bolts, washers, packings and welding including testing for leakage etc tothe entire satisfaction of Engineer-in-Charge with & including painting external surfaces with two coats of synthetic enamel paint of approved tint over a coat of zinc chromate primer including dismantling & taking out existing fittings of any description complete all as specified and as directed. |
| 18 | Supply and fixing Ductile Iron fittings, specials (K-12) such as bends, tapers, collars, reducers, tee pieces (single or double branch) any type, angle/radius and straight connecting pieces etc (ISI marked) conforming to IS-9523 for flanged/socket and spigot ends suitable for DI pipe upto 200 mm bore, fixed in repairs, complete all as specified and as directed. |
| 19 | Supply and fixing Cast iron fittings (ISI marked) upto 200 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs, all as specified & directed. |
| 20 | Taking up or down old uPVC pipe of size 20mm bore and Supply, laying, jointing in trenches or fixing on wall new 20mm bore uPVC Pipes (Sch 80) Solvent Weld Pipe (Lead Free) including necessary fittings (Sch 80) such as bend, tee, elbow etc & testing on completion complete all as specified and as directed. |
| 21 | All as per serial item No. 19 here in above but 25 mm bore. |
| 22 | All as per serial item No. 19 here in above but 40 mm bore. |
| 23 | All as per serial item No. 19 here in above but 50 mm bore. |
| 24 | S&F in repairs uPVC ball valve (Sch 80) of size 20 mm bore complete all as directed . |
| 25 | All as per serial item No. 23 here in above but 25 mm bore. |
| 26 | All as per serial item No. 23 here in above but 40 mm bore. |
| 27 | All as per serial item No. 23 here in above but 50 mm bore. |
| 28 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MoD land complete all as specified and as directed. |
| 29 | M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 30 | M&L for cutting/dismantling of existing PCC floor / hardstanding / Interlocking tiles path / WBM road with soling & premix carpet of any description for replacement / laying of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) including re-setting of interlocking tiles after replacement / laying of pipe line complete all as specified & as directed. |
| 31 | M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair & even complete all as specified and as directed. |
| 32 | M&L for preparation of newly plastered / unplastered surfaces of walls & applying three coats of white wash complete all as specified. |
| 33 | Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete all as specified & as directed. |
| 34 | All as per serial item No. 32 here in above but 100 mm bore. |
| 35 | Supply and fixing cast iron foot valve of size 80mm bore as per IS:4038 (ISI marked), ball type operation, flanged ends with rubber insertion sheet 3mm thick, nuts, bolts and washers including taking down old existing unserviceable foot valve of 80mm bore complete all as specified & as directed. |
| 36 | All as per serial item No. 34 here in above but 100 mm bore. |
| 37 | All as per serial item No. 34 here in above but 150 mm bore. |
| 38 | Attending day to day water supply complaints such as no water supply/ low water supply and water leakage from GI tubing & fittings/fixtures of 15 mm to 25 mm bore by checking the nature of defects for leakages, no water supply, less/ low pressure water supply and rectification work to be carried out by replacing requisite materials, testing complete on completion of work, excavating in any type of soil, returning, filling and disposal of surplus soil if any as directed. Notes : (i) Material such as GI tubing, valve, etc and excavation/ earth work required for rectification work shall be measured and paid under relevant items.(ii) Excavation & earth work required for rectification work shall be measured and paid under relevant items.(iii) Minor stores such as washers, taflon tape, small size nuts, bolts, clamps, etc shall be provided by the contractor and cost thereof shall be inclusive in quoted rates. The decision of Accepting Officer will be final and binding regarding extent to which the items can be considered as minor.(iv) Requisite T&P and transportation for tradesman to rectify the defects shall be contractor’s responsibility.(v) The contractor / his representative shall collect the complaint slip from MES complaint cell / concerned JE E/M every day at 9.00 AM and deposit the complaint slip duly signed by the users to concerned JE E/M after rectification of complaint. |
| 39 | All as per serial item No. 37 here in above but for 40mm to 50mm bore. |
| 40 | All as per serial item No. 37 here in above but for 80mm to 100mm bore |
| 41 | Repair/ Maintenance/ updating including operation and regular maintenance of the Automatic water supply system excluding spares. Carrying out complete maintenance/ servicing/ Repairs with establishing Ladder Logic Programming as required of all the sub system viz. PLC based control panels (with all the Memories), breakdown maintenance all as specified and directed by Engineer-in-Charge on following location :-Establishing Ladder Logic programming Automation Control Panel at location: Main Pump House, Pump House No.2, NEU Pump House, Bedi Well Pump House No.1 & 2, Bedi OHT, OHT No.3, OHT No.4, OHT No.5, OHT No. 7 & 8 and MIMIC Panel at Main Pump House.Notes:-(i) Unit rate quoted by tenderer shall inclusive of checking of system fortnightly and necessary servicing, repair and daily printing log sheets data on hourly basis and to be submitted to EIC and the register shall be maintained to that effect. (ii) In addition to above specific emergency complaints from time to time shall be attended after receiving the same.(iii) Repair/ Maintenance/ updating including operation and regular maintenance of the Automatic water supply system shall be carried out through Original Equipment Manufacturer (OEM) i.e. M/S Recktronic Devices & Systems or through their authorized agent. The contractor shall submit documentary proof/evidence in this regard before execution of Work. In case of authorised agent, MoU documents of authorization shall be provided before execution of work.(iv) Quoted rate deemed to be included for SIM card charges and Data. |
| 42 | M&L for CERT-in auidt from Govt approved firm for entire water supply automation system with all necessary paper work including installation of latest antivirus for one year validity as per system requirement in computer all as directed by EIC. |
| 43 | S&F in repair GPRS communication modem alongwith suitable patch chord and mounting Memories compatible with existing system complete all as directed. Make: Meastro Heritage Cat Part No. M100 or equivalent in Visiontek / LEO / Motorola as approved by GE. |
| 44 | S&F in repairs single phase preventer, AC, 230 V including commissioning & testing complete all as specified. Make: Minilec Model VSP D2 or equivalent in makes mentioned in Appendix \"B\" here-in-after. |
| 45 | S&F in repair Relay with base 24 V DC. Make: IDEC Cat Part No. RS4S-D24 or equivalent in Omron/Siemens/Leone/Goodsky / makes mentioned in Appendix \"B\" here-in-after. |
| 46 | S&F in repair LED type Red /Yellow /Green indicating lamp.Make: ESBEE or equivalent in TEKNIC / TELEMEACHNIQUE / makes mentioned in Appendix \"B\" here-in-after. |
| 47 | S&F in repairs push botton with LED indicator, 240 V AC colour Red/Yellow/Green. Make: ESBEE or equivalent in TEKNIC / TELEMEACHNIQUE / makes mentioned in Appendix \"B\" here-in-after. |
| 48 | S&F in repair PLC (Programmable Logic Controller) comprising of Main Controller, MMI with display, input / output. Make: Unitronics Cat Part No. XB7-EV04 MPNor equivalent in Mitsubishi / Electric India / Siemens / used by OEM as approved by GE. |
| 49 | S&F in repairs automatic water level controller PCB-5/10 level. Make: SPLASH / RDS / ICS / used by OEM. |
| 50 | S&F in repairs Flow switch. Make: Danfoss Cat Part No. 061H4000 or equivalent in Rapid Control / make as approved by GE. |
| 51 | S&F in repairs Selector Switch, type of contact - 2NO. Make : Scheinder Cat Part No. XB5AD33N or equivalent in makes mentioned in Appendix \"B\" here-in-after. |
| 52 | S&F in repairs Magnetic level switch. Make: RDS / Honeywell / Danfoss / Mahalaxmi / Crystal / used by OEM as approved by GE. |
| 53 | S&F in repairs Pressure switch 0-10 Kg/sqcm. Make: Siemens Cat Part No. P220 7MF1567-3CA00-1GA1 or equivalent in DANFOSS / HONEYWELL / ABB / WIKA / HGURU / FIEBIG as approved by GE. |
| 54 | S&F in repair limit switch for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia butterfly valve complete. Make: Honwywell / Danfoss / Cherry or equivalent in make as approved by GE. |
| 55 | S&F in repais solenoid valve 10mm/ 15mm/ 20mm bore 230 V AC. Make: Rotex / Avcon / Johnson Controls / Danfoss or equivalent in make as approved by GE. |
| 56 | S&F in repairs coil for solenoid valve 10mm/ 15mm/ 20mm bore 230 V AC. Make: Rotex / Avcon / Johnson Controls / Danfoss or equivalent in make as approved by GE. |
| 57 | S&F in repairs Ultrasonic Level Transmitter at Pure Water Sump (for measurement of level in pure water sump / OHT) having 0-5 meters range, 0.5% minimum Accuracy, 24 V DC supply Voltage and 4-20 mA output complete.Make: Banner Cat Part No. QT50 ULB or equivalent in ABB / E& H / Krohne Marshall or equivalent in make as approved by GE. |
| 58 | S&F in repairs Electric motor suitable for 80 mm dia actuator complete. Make: Marsh RT Series or equivalent in Ritetork / Rotork / make as approved by GE. |
| 59 | All as per serial item No. 57 here in above but 100 mm dia. |
| 60 | All as per serial item No. 57 here in above but 150 mm dia. |
| 61 | All as per serial item No. 57 here in above but 200/250 mm dia. |
| 62 | S&F in repairs MS spiral gear for gear box or actuator suitable for 80 mm dia butterfly valve complete. Make: Marsh / Ritetork / Rotork / make as approved by GE. |
| 63 | All as per serial item No. 61 here in above but 100 mm dia. |
| 64 | All as per serial item No. 61 here in above but 150 mm dia. |
| 65 | All as per serial item No. 61 here in above but 200/250 mm dia. |
| 66 | S&F in repairs MS sector gear for gear box or actuator suitable for 80 mm dia butterfly valve complete. Make: Marsh / Ritetork / Rotork / make as approved by GE. |
| 67 | All as per serial item No. 65 here in above but 100 mm dia. |
| 68 | All as per serial item No. 65 here in above but 150 mm dia. |
| 69 | All as per serial item No. 65 here in above but 200/250 mm dia. |
| 70 | S&F in repair Motorised actuator suitable for 80 mm dia butterfly valve complete. Make: Marsh/ Hassel Hoffner / Ritetork / make as approved by GE. |
| 71 | All as per serial item No. 69 here in above but 100 mm dia. |
| 72 | All as per serial item No. 69 here in above but 150 mm dia. |
| 73 | All as per serial item No. 69 here in above but 200 mm dia. |
| 74 | All as per serial item No. 69 here in above but 250 mm dia. |
| 75 | S&F in repair capacitor & Resistor (RC Circuit) for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia butterfly valve complete. Make: CTR or equivalent in make as approved by GE. |
| 76 | S&F in repair top cover for actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia butterfly valve including display nomenclature as per site requirement complete. |
| 77 | S&F in repair SMPS having input 230 V AC and output 24 V DC complete. Make: NHP Power Systems Cat Part No. NHP-ES-120-24-RM or equivalent in Telemehanique / other make as approved by GE. |
| 78 | S&F in repair 5 pair 0.5 sqmm armoured communication cable with copper conductor complete. Make: FSC / Polycab / Delton |
| 79 | S&F in repair 2 core 1.5 sqmm armoured cable with copper conductor complete. |
| 80 | S&F in repair 4 core 1.5 sqmm armoured cable with multistranded copper conductor complete, ISI marked. |
| 81 | S&F in repair 6 core 1.5 sqmm armoured cable with multistranded copper conductor complete, ISI marked. |
| 82 | S&F in repair communication cable jointing kit complete. Make: Clip - Seal or equivalent in make as approved by GE. |
| 83 | Supply and laying/fixing 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 with all fittings, laid in trenches, under floors or roads/ along poles etc for protection of electric cables complete all as directed. |
| 84 | S&F MCB, 6 Amps, Single Pole, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, fixed in repairs, complete all as specified and as directed. |
| 85 | S&F in repairs external antenna for PLC to Modem Gain 9db. Make: Pentagon Satellite Cat Part No. PSO1GSM/9RM (SMA) or equivalent in Cherry / make as approved by GE. |
| 86 | M&L for construction of Valve pit chamber of size 1200x1200x1200mm internal dimensionincluding necessary excavation & earth work in any type of soil, PCC 1:4:8 type D2 in foundation, brick work with old size fly ash bricks in CM 1:4, 15 mm thick plaster in CM 1:4internally and externally flush pointed in same mortar as work proceeds, 75 mm thick PCC coping all round in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), flooring shall be 40 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate laid over 75 mm thick hard core.Top cover shall be made out of MS sheet 3.00 mm thick fixed in angle iron frame made out of angle iron size 40x40x6 mm with two number of hinges on one side and locking arrangement at other side complete including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed including dismantling of old existing unserviceable vale pit chamber.Note : Any minor modification where required at site shall be deemed to be included in the quoted rates. The decision of GE shall be final and binding regarding extent to which the change can be considered as minor. |
| 87 | All as per serial item No. 85here-in-above butof internal size 900x900x900 mm -do- |
| 88 | All as per serial item No. 85here-in-above butof internal size 600x600x600 mm -do- |
| 89 | M&L for Glow sign board of size 150cm x 90cm x 15cm, out door type, totally enclosed with locking arrangement, both side made of 3mm thick milky white / coloured acrylic sheet with letters/matter by overlay colour film (colour as approved by Engineer-in-Charge) pasted over sheet, frame work made out of 26 gauge thick galvanized iron sheet and 50mm x 50mm x 5mm MS angle iron frame work, with & including suitable LED light fittings 1x10 watt - 2 Nos, prewired, with & including all standard accessories as per standard trade practice including making electric connections with suitable size multistranded copper conductor cable, including two coats of synthetic enamel painting of approved tint over a coat of zinc chrome primer after preparation of steel surfaces of MS frame work, fixed at site by grouting the legs of frame in PCC (1:2:4 type B1) blocks of size 30cm x 30cm x 45cm, including dismantling & taking out old sign board, complete, all as directed.Note :Bottom of sign board shall be 1.00 metre above from ground level. Legs shall be embedded in PCC block upto 40cm depth. 20cm long holdfast made of MS angle iron of size 30 mm x 30 mm x 5mm shall be welded at bottom of each leg. Letters/matter etc for sign board shall be given by the Engineer-in-charge as per location of sign board. The lettering font & style, lightning work, etc shall be as directed by Engineer-in-Charge. |
| 90 | M&L for water supply distribution layout/chart glow sign board of size 150cm x 90cm x 15cm, out door type, totally enclosed with locking arrangement, both side made of 3mm thick milky white / coloured acrylic sheet with layout/letters/matter by overlay colour film (colour as approved by Engineer-in-Charge) pasted over sheet, frame work made out of 26 gauge thick galvanized iron sheet and 50mm x 50mm x 5mm MS angle iron frame work, with & including suitable LED light fittings 1x10 watt - 2 Nos, prewired, with & including all standard accessories as per standard trade practice including making electric connections with suitable size multistranded copper conductor cable, including two coats of synthetic enamel painting of approved tint over a coat of zinc chrome primer after preparation of steel surfaces of MS frame work, fixed at site by grouting the legs of frame in PCC (1:2:4 type B1) blocks of size 30cm x 30cm x 45cm, including dismantling & taking out old sign board, complete, all as directed.Note :Bottom of sign board shall be 1.00 metre above from ground level. Legs shall be embedded in PCC block upto 40cm depth. 20cm long holdfast made of MS angle iron of size 30 mm x 30 mm x 5mm shall be welded at bottom of each leg. Water supply distribution layout/chart/Letters/matter, etc for sign board shall be given by the Engineer-in-charge. The lettering font & style, lightning work, etc shall be as directed by Engineer-in-Charge. |
