Tender For Special Repair To Roof And Toilet At Dcs Billets At P-156 At 9Brd Under Ge Af Lohegaon
Tender Value
49 Lakhs
Estimated cost
Bid Submission
29 May 2023
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Roof And Toilet At Dcs Billets At P-156 At 9Brd Under Ge Af Lohegaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-May-2023 | REVISED PS | Other | 22-May-2023 |
| 2 | 13-May-2023 | REVISED BOQ | BOQ | 22-May-2023 |
| 3 | 22-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-May-2023 |
| 4 | 27-May-2023 | AMENDMENT TO PERFORMANCE SECURITY | Other | 29-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors & pavings any thickness (below or above GL).complete all as specified and directed. |
| 3 | Demolition of cement concrete (reinforced) in other than ground .complete all as specified and directed. |
| 4 | Taking down door chowkats or frame exc. 1.50 Sqm but n.exc. 4 Sqm each without taking off shutters from the frame complete all as specified and directed. |
| 5 | Taking down door chowkats or frame n.exc. 1.50 Sqm each (without taking off shutters from the frame complete all as specified and directed. |
| 6 | S&F Powder Coated Anodised aluminium frame for aluminium lowerd of ventilators with one or more rebates including joining cleat for fixing etc.including sealing of window/door frames with sillicon gel to avoid rain water entry etc complete all as specified and directed. |
| 7 | M&L for forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete new work built in cement mortar 1:4.complete all as specified and directed. |
| 8 | S&F pressed steel door frame of size 165 x 60mmwith one or more rebates including necessary fixinglugs, hinges, lock strike plate etc inc complete all as specified and directed. |
| 9 | M & L for PCC 1:3:6 type C0 using 12.5 mm graded aggregate as in filling of pressed steel frame chowkats complete all as specified and directed. |
| 10 | S&F for 35mm thick panel shutters,(two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedsolid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 11 | S&F for 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing where it is being used (length and girth as fixed) complete all as specified and directed. |
| 12 | Preparation ofnew wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed. |
| 13 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes for top &bottem rails, ms frame shall be covered with heat moulded plain colour PVC \"C\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheetfor top rail ,lock rail, &bottem rail, on either side & as gap insert for top rail , panneling of plain colour pvc sheet to be fitted in the ms frame welded /sealed to the stiles & rails with suitable pvc sheet beading, &jointed together with solvent cement suppling & fixing in the frame at site as per spacification &drawing. |
| 14 | S&F PVC door frame 50x47x5mm thick reinforced MS square tube including 25x6mm MS holdfast etc complete all as specified and directed. |
| 15 | S&F 4 mm frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 16 | S & F 100mmButt hinges, medium weight, cold rolled mild steel, and fixed.complete all as specified and directed. |
| 17 | S&F aluminium anodised barrel tower bolts of extruded section 125 mm long.complete all as specified and directed. |
| 18 | S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.complete all as specified and directed. |
| 19 | S &F 150 mm size Bow handle extruded aluminium alloy fabricated type, anodised complete all as specified and directed. |
| 20 | S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed.complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed. |
| 22 | M&L Glazed coloured ceramic tiles joint free in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick plaster backing in cement mortar 1:4complete all as per specified and directed. |
| 23 | M&L Non-skid joints free colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces including 20mm thick screed bed or bedding layers in CM 1:4for laying floor finishes. complete all as specified and directed |
| 24 | Taking up or down 25mm dia steel tubing and connections,including cleaning for refixing or removal to storecomplete all as specified and directed |
| 25 | All as per item No. 24 above but 20 mm dia of pipecomplete all as specified and directed |
| 26 | All as per item No. 24 above but 15 mm dia of pipecomplete all as specified and directed |
| 27 | S&F 25 mm dia GI water tubing medium grade fixed to wal / ceiling or laid in trenches. complete all as specified and directed |
| 28 | All as per item No. 27 above but 20 mm dia of pipecomplete all as specified and directed |
| 29 | All as per item No. 27 above but 15 mm dia of pipecomplete all as specified and directed |
| 30 | Demolition of brick or stonemasonry built in cement mortor including all quoins, arches pillars etccomplete all as specified and directed |
| 31 | Demolition and breaking up CI/PVC drain pipes of any sizecomplete all as specified and directed |
| 32 | M & L for fly ash brick work with sub class \"B\" old size bricks straight or curved on plan exc 6 m mean radius in CM 1:6. complete all as specified and directed |
| 33 | Supply and fix,as in repairs,vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floorcomplete all as specified and directed |
| 34 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, and Seat and cover for pedestal pan etc. complete all as specified and directed |
| 35 | S&F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including bracketscomplete all as specified and directed |
| 36 | Supply and fix, in repair vitreous china counter top wash basin, white flat back size 460 x 310x220 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified Cat part No 4793 of Prayag or equivalent |
| 37 | Supply and fix in repair waste coupling of PTMT 32mm (full threaded) (minimum weight 32mm - 45 gms) suitable for wash hand basincomplete all as specified and directed |
| 38 | S&F in repair health foucet 15mm bore mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F in repair for Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed CAT No.BS-73S of Prayag or eqivalant jquar and hindware. |
| 40 | S & F in repair 15 mm bore anglecock chromium plated capstan headscrewed down for iron pipes.complete all as specified and directed (Make:Prayag or eqivalantjaquar and hindware). |
| 41 | S&F in repair PVC connection 15mm dia sizes with PTMT nuts of length 450 mm complete all as specified & directed. |
| 42 | S & F for PVC (SWR) pipes 110 mm dia in any length with rubber ring joints fixed to walls. complete all as specified and directed |
| 43 | S & F PVC (SWR) pipes 75mm dia in any length with rubber ring joints fixed to walls. complete all as specified and directed |
| 44 | S & F PVC bend 110mm dia with access door including removing old damaged CI bends. complete all as specified and directed |
| 45 | S & F PVC bend 75mm dia with access door including removing old damaged CI bends. |
| 46 | S & F PVC Single T 110mm dia with equal or unequal including removing old damaged CI bends. complete all as specified and directed |
| 47 | S & F PVC TEE 75mm dia with access door including removing old damaged CI bends. |
| 48 | S&F bevelled edge 5.5mm th mirror of selected quality glass, of any size, edge framing with tick wood beading or aliminium frame and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed by Engr in charge. |
| 49 | S & F PVC multi floor trap with out let 75mm dia plain with grating including jointing. complete all as specified and directed |
| 50 | S & F PVC (SWR) P traps bore 125mm dia.complete all as specified and directed |
| 51 | S & F 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal including removing of old branch piece. complete all as specified and directed |
| 52 | All as per item No. 51 above but 75 mm bore.complete all as specified and directed |
| 53 | S & F 110 mm bore PVC (SWR) branch piece single (double Y) equal or unequal including removing of old branch piece. complete all as specified and directed |
| 54 | All as per item No. 53 above but 75 mm bore.complete all as specified and directed |
| 55 | S&F LDPEwaste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash basin as specified. |
| 56 | Supply fix in repair chromium plated pillar tap 15mm Dia with capstain heads, screwed down high pressure. complete all as specified and directed CAT No. 6802 of Prayag or eqivalant jaquar and hindware. |
| 57 | M & L for rendering 10 mm thick in CM1:6 on brick or concrete surfaces finished even and smooth w/o using extra cement. complete all as specified and directed |
| 58 | M & L for rendering 5 mm thick on ceiling in CM1:4 on brick or concrete surfaces finished even and smooth w/o using extra cement . complete all as specified and directed |
| 59 | M & L for rendering 15 mm thick in CM1:6 on brick or concrete surfaces finished even and smooth w/o using extra cement. complete all as specified and directed |
| 60 | M & L preparation of newly plastered surfaces of wall and applying 3 coats of white washcomplete all as specified and directed |
| 61 | M & L preparation of newly plastered surfaces of ceiling and applying 3 coats of white wash complete all as specified and directed |
| 62 | S&F Plate(plain or chequered) channels, square cut or notched(ordinary and conter sunk) forming holes, without any attachment. Of FE410-W(GdeE- 250) quality. Compllete all as per specified and directed. |
| 63 | S & F for framed works such as grills grating etc with ends of bars shouldered and / or riveted or forged into spkes, framed guard bards iron doors etc or similar work conforming to Fe-290 G165complete all as specified and directed |
| 64 | S & F in repairs Vitreous china urinal, full stall type, white with LDPE pipe of 32 mm dia, complete all as specified and directed by Engineer-in -charge. |
| 65 | S & F 15mm dia urinal spreader chromium plated fancy type, screwed down for iron pipes. complete all as specified and directed |
| 66 | M&L 20mm thick Granite(of any type) work(table rubbled and polished) in steps, jambs, pillar, windowcills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 67 | S&F rotational moulded polyethylene water storage tank tripple layer rectangularl with closed top 500 ltrs capacity hoisted and fixed in position connecting to inlet and outlet pipe connections with and including 20mm dia GI wash out with plug fixed in repairs complete all as specified and directed by Engineer in charge. |
| 68 | S&F rotational moulded polyethylene water storage tank tripple layer cylindrical vertical with closed top 1000 ltrs capacity hoisted and fixed in position connecting to inlet and outlet pipe connections with and including 20mm dia GI wash out with plug fixed in repairs complete all as specified and directed by Engineer in charge. |
| 69 | S/F ball brass valve high presure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore of pipe all as specified |
| 70 | S&F in repair stop cock 20mm gun metal gate valve with iron wheel head |
| 71 | S & F in repairs 15mm bore two way Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed CAT No.P6712 of Prayag or eqivalant jaquar and hindware. |
| 72 | S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed CAT No.P6808 of Prayag or eqivalant jquar and hindware. |
| 73 | M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint. |
| 74 | M&L for 100 mm th PCC 1:5:10 type E2using 40mm graded stone agg as in foundation filling and mass concrete complete all as directed |
| 75 | M&L for PCC 1:1½ : 3 orBitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed |
| 76 | M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed |
| 77 | M&L for polythene flim black 50 micron laid in sunken floor complete all as directed |
| 78 | M&L for 30mm thick PCC 1:1.5:3 tye A0 using 12.5mm graded stone agg as in sunken floor mixed with water roofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately) |
| 79 | M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed |
| 80 | M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed |
| 81 | Supply only liquid water proofing compound @ 300ml/50 Kg cement. |
| 82 | M&L for100mm thickcement concrete 1:3:6, type C2, using 40mm graded aggregatefor tank foundation over roofcomplete all as specified and directed by Engineer in charge. |
| 83 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 84 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed. |
| 85 | S & F jointfree Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bedin CM (1: 6) complete all specified and directed. |
| 86 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring to receive tiles all as specified and directed |
| 87 | M&L for jointfreeGlazed Ceramic Coloured Tiles, 350X250X7mm/450X350X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 88 | Fixing only 15mm dia tubes, any grade, to walls and ceilings or laying in floors |
| 89 | Fixing only20mm dia tubes, any grade, to walls and ceilings or laying in floors |
| 90 | Cutting of existing steel tubing for alternation or addition of 15m m dia pipes all as specified and directed. |
| 91 | Cutting of existing steel tubing for alternation or addition of 20m m dia pipes all as specified and directed. |
| 92 | Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not xc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge. |
| 93 | S&Fin repair vitreous china, squatting pan of \"Orissa\" pattern, long pan, size 580 mm x 440 mm, white, with \"P\" of \"S\" Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed. (Make : Hindware) |
| 94 | S&Fin repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed |
| 95 | M&L in repairfor 15 mm bore bib tapchromium plated cast copper alloy with wall flange complete all as specified and directed (Make :Prayag/hindware/Jaguar) |
| 96 | M & L for Disconnecting existing tanks exc 500ltr and n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 97 | Dismantling water tanks of any type of capacityexc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed. |
| 98 | S&F rotational moulded polyethylene double layer water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressurePTMT with epoxy coated Aluminium rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge. (Make : Syntex) |
| 99 | S & F in repair PVC low level flushing system plastic valvewith inlet ball valve float chain and ball (of capacity 10 liters) ISI Markedincl 32mm PVC flush pipe complete all as specified and directed (Make :Hindware) |
| 100 | S&Fin repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, 15mm CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.(Make Hindware) |
| 101 | S& F in repairfor15 mm bore angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (Make :Prayag/hindware/Jaguar) |
| 102 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ® all as specified and directed. (Make : Modigaurd) |
| 103 | S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 104 | S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed bothends for iron pipe 20 mm bore and fixed |
| 105 | S &Fin repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. (Make :Prayag/hindware/Jaguar) |
| 106 | S &F in repair 15mm dia stop valves cast copper alloy, screwed donw high pressure with crutch or butterfly handle screwed both ends for iorn pipe or for unions and fixed (concealed type) all as specified and directed. (Make :Prayag/hindware/Jaguar) |
| 107 | S&F CP soap case all as specified and directed |
| 108 | Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/AC or Reinforced concrete) set in cement mortar |
| 109 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 110 | -do-as above item no 109 but 110mm dia |
| 111 | M&L in repair for PVC (SWR) bends of any radius with oval and access door of 75mm dia |
| 112 | -do- as above item no.111but 110mm dia |
| 113 | M&L for PVC (SWR) vent cowl of 110mm dia |
| 114 | Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm. |
| 115 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed . |
| 116 | Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed. |
| 117 | S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21 |
| 118 | S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed. |
| 119 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed. |
| 120 | S&F 3.0 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed. |
| 121 | Demolition of cementConcrete of any description and in any position not otherwise specifically provided for (below or above ground level) |
| 122 | M&L for PCC 1:1½ : 3 orBitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed |
| 123 | M&L for 25mm thick PCC 1:2:4 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even without using extra cement complete all as specified and as directed (Note:- WPC shall be measured and paid separately) |
| 124 | Taking downexisting water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets,scrubbing down with water etc. complete all as specified and directed. |
| 125 | M&L for 10 mm thick rendering onfair faces of brick works on wall / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed ( With using WPC of 3% of Cement Weight. Note:-WPC shall be measured and paid seperately. |
| 126 | Preparation of surface and applying two coats of hot bitumen blown 85/25 to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed. |
| 127 | M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer\"sinstructions complete all as specified and directed. |
| 128 | Supply only integral waterproofing compound. |
| 129 | M&L Providing, cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges finished even and fair with out using extra cement complete all as directed by Engr-in-charge. |
| 130 | M & L for two coat of aluminium paint above the new untreated APPmembrane complete all as specified and directed. |
| 131 | S&Fin repair pvc SWR floortrap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). |
| 132 | S & F in repair Gratingdoom 100mm dia of Stainless steelwith holes for waste pipes all as specified and directed. |
| 133 | S & F in repair Grating doom 100mm dia of stainless steel all as specified and directed. |
| 134 | Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. |
| 135 | Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and capingwith all fittings/fixture etc andrecessed typemetal boxISI Marked (IS:14772) for housing switches / sockets all a specified and directed NoteMetal sunken box , cover plate and frameetc will be measured and paid seprately in respective item.(a )Onelight point/Fan controlled by one switch. |
| 136 | All as per item no 135 but One5 amps socket point in same board controlled by one switch. |
| 137 | Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,ISI Marked complet for housing one 15 A Switch / socketscompleteNote : Metal sunken box , cover plate and frameetc will be measured and paid seprately in respective item. |
| 138 | S & F Sub Main Wiringwith FRLS PVC Insulatedmultistranded copper conductorwires ofsize2x 4.0 sq. mm + 1x 2.5 sq. mm earth wirein casing caping complete as directed. |
| 139 | S & F Sub Main Wiringwith FRLS PVC Insulatedmultistranded copper conductorwires ofsize2x 6.0 sq. mm + 1x 4 sq. mm earth wirein casing caping complete as directed. |
| 140 | S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including fixing concealed in wall and making good the disturbed surfacecomplete all as directed |
| 141 | Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus barincluding fixing concealed in wallincluding cutting chasing in stone masonary /Brick masonary and making good the disturbed surfacemaking all nacessary incomming and out going connections using proper size copper thimbles incl taking out old SPN DBcompleteall as required on site all as directed |
| 142 | Supply and fix MCB SPN 40 Amp, 230 volt \"C\" series complete |
| 143 | S&F MCB SP 240 volt 6 to 32 A \"C\" series complete |
| 144 | Supply and fix switch piano 5 Amps |
| 145 | Supply and fixswitch Socket combination , 6A - 2/3 pin combined |
| 146 | Supply and fixswitch Socket combination , 15A - 2/3 pin combined |
| 147 | Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm |
| 148 | Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal. |
| 149 | M & L for Complete removal of existing treatment on internal wall surfaces and applying 1mm thick wall care putty on walls all as specified and directed by Engineer in Charge. |
AI Tender Summary
Tender Timeline
May 27, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 22, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 22, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 29, 2023
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 29, 2023
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 29, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender