Tender For Day To Day Maintenance, Special Repairs, Petty Works And Other Miscellaneous Works Telephone Bhavan Compound Saifabad , Hyderabadfor The Financial Year 2022-23
Tender Value
3.56 Lakhs
Estimated cost
Bid Submission
08 May 2023
0 days left
EMD
7150
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
saifabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Day To Day Maintenance, Special Repairs, Petty Works And Other Miscellaneous Works Telephone Bhavan Compound Saifabad , Hyderabadfor The Financial Year 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 5 | 250x16 mm |
| 6 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 7 | 300x10 mm |
| 8 | 150x10 mm |
| 9 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 10 | 100 mm |
| 11 | Providing and fixing to existing door frames. |
| 12 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± |
| 13 | 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
| 15 | (i)Single socketed pipes. |
| 16 | 75 mm diameter |
| 17 | 110 mm diameter |
| 18 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 19 | Single tee with door |
| 20 | 110x110x110 mm |
| 21 | Bend 87.5° |
| 22 | 110 mm bend |
| 23 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 24 | 75 mm |
| 25 | 110 mm |
| 26 | White washing with lime to give an even shade : |
| 27 | Old work (one or more coats) . |
| 28 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 29 | Old work (one or more coats) |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 31 | One or more coats on old work. |
| 32 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 33 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 35 | W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 37 | Orissa pattern W.C. pan of size 580x440 mm |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 39 | 20 mm nominal outer dia. Pipes. |
| 40 | 25 mm nominal outer dia .Pipes. |
| 41 | 40 mm nominal outer dia. Pipes. |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 43 | 25 mm nominal outer dia. Pipes. |
| 44 | 40 mm nominal outer dia. Pipes. |
| 45 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 46 | 25 to 40 mm nominal bore |
| 47 | Providing and fixing cPVC Union/cPVC nepple in G.I/cPVC pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 48 | 20 mm nominal bore |
| 49 | 25 mm nominal bore |
| 50 | 40 mm nominal bore |
| 51 | Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 52 | for windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with ladder arrangement wherever necssary. |
| 53 | for windows in upper floors ( other than ground floor ) up to 8 floors with necessary Jhoola arrangement |
| 54 | Charges for minor Repairs to wooden panelled/flush doors / window setc., . Cost includes all labour for attending minor repairs like sides planing for proper functioning and refixing screws after attending necessary repairs etc., with necessary screws, nails etc., complete (Cost of wood will be paid separately,but i/c required screws ) |
| 55 | a) Wooden door / window/Cupboards |
| 56 | Charges for arranging carpenter / plumber along with helper whereever required for attending minor repair works in the compound etc., complete as directed by the Engineer-in-charge.(The required fittings & fixtures exept screws/nails, drilling etc.shall be paid separately and measured for each half day) |
| 57 | Removing the damaged sanitary and water supply fittings and replacing them with new fittings including necessary white lead/ lead wool etc complete as directed by the engineer in charge. |
| 58 | P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 59 | P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe |
| 60 | 32 mm dia |
| 61 | 40 mm dia |
| 62 | PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 63 | 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 64 | 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 65 | Uplasticised PVC connection pipe 15 mm nominal boreand 45 cm length with brass unions : |
| 66 | PTMT bib cock 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.of approved quality and colour. |
| 67 | PTMT stop cock15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 68 | PTMT pillar cock15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour . |
| 69 | PTMT grating 100 mm nominal dia.Circular type. of approved quality and colour. |
| 70 | stainless steel grating to floor trap of required size and shape and finishing etc., complete |
| 71 | 15 mm nominal borebrass bib cock of approved quality : |
| 72 | 15 mm nominal borebrass stop cock of approved quality : |
| 73 | Providing and fixing CPVC ball valve of approved quality high or low pressure with plastic float complete. |
| 74 | 20mm nominal bore |
| 75 | 25mm nominal bore |
| 76 | 40mm nominal bore |
| 77 | Repairs to existing PVC flushing cisterns as per directions of Engineer-in-charge.. |
| 78 | a) Attending minor repair to flushing cistern by fixing Knob including washers,rope etc., complete for proper functioning of cistern |
| 79 | b) Attending repair to flushing cistern by replacing suitable internal siphon system set ., for proper functioning of cistern |
| 80 | Attending repair to flushing cistern by replacing suitable internal ballcock system set ,etc., for proper functioning of cistern |
| 81 | Charges for demolising the existing WC pan with trap from position including surrounding lime concrete completo fix new WC pan with trap including jointing with the existing waste, refilling the surroundings |
| 82 | with lime concrete and finishining the floor with cement concrete flooring using required quantity of Fose Rock or equivalant liqued all complete as per the direction of Engineer-in Charge.(The rate includes the disposal of all the debries to the dumpimg ground) |
| 83 | Cleaning of sewer lines, manholes etc.,at all depths. cost includes all labour for removing the sludge, silt, slush, waste etc., from the manholes and rodding the sewer lines by mobile sewer roding equipment from manhole to manhole to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the compound etc., |
| 84 | Cleaning of nahni traps/floor traps at all levels for removal of blockages including removing the silt, slush, waste etc ensuring smooth flow etc and applying white cement in tile joints of bath/WC including water proofing compounds (Like forsroc) etc wherever required to arrest leakages etc. |
| 85 | Cleaning of the choked Gully trap Chambers and sewer line upto next manhole from the water entry outlet point in drainage system using rodding,wire/cables etc., to remove all the waste, debris etc., including disposal etc., as per the directions of Engineer-in-charge |
| 86 | Cleaning of existing over head tank/ underground water storage tank by mechanical method of specified TANKCLEAN process in stages: (1) Empty the tank/ sump and make it to near dry, (2) wash the tank internal surfaces and top of the tank with fresh water and clean/ rinse the inside surfaces of side walls, ceiling and floor surfaces perfectly by removing all scalling, fungus etc., with rotary jet mechanism, (3) Removing/ cleaning mud, silt, waste, sludge and garbage from the tankwith sludge pump/ vaccum cleaner and disposing outside the building, (4) After drying applt UV radiation with specified equipment in the tank for 15 minutes to kill the harmfull bacteria etc., complete all as per directions of the Engineer-in-charge. |
| 87 | (The rate includes filling of outlets of tank with cotton during cleaning marking of date of painting on the tanks and cleaning of all the dirt/ waste etc., from the terrace and submission of certificate from specialised agency). |
| 88 | Providing and fixing C.P.Brass bib/ stop cock of Parryware Claret (T4604A1) makeor approved equivalent in toilets . The bibcocks are to be fixed by removing old bibcocks including making necessary adjustments. All complete as per directions of Engg-in-Charge. The rate is all inclusive nothing exra shall be paid on any account. a) 15mm dia nominal bore |
| 89 | Intense deep cleaning ofexisting toilets flooring tiles & dadoing tiles of height upto 2.10m including cleaning of sanitory fittings like wash basins, water closets, flush tank, urinals, granite platform etc.,complete by using chemical, detergents with hand machine etc., complete as per directions of Engg-in-Charge. |
| 90 | Providing and fixing Swan neck C.P.Brass long body Pillar cock of Parryware Claretmake (T4668A1) or approved equivalent in toilets in BSNL Bhavan. The pillar cocks are to be fixed by removing old pillar cocks including making necessary adjustments. All complete as per directions of Engg-in-Charge. The rate is all inclusive nothing exra shall be paid on any account. a) 15mm dia nominal bore |
| 91 | Rebate for taking away the unserviceable sanitary / water supply fittings including removing from the existing position . etc., complete. |
| 92 | GI pipes 15mm/20mm/ 25mm/ 32mm /40mm |
| 93 | Add difference in GST |
| 94 | Add difference in Cost Indicies of DSR-21 |
AI Tender Summary
Tender Timeline
May 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender