Tender For Construction Of Community Hall At Village Lakhanpur Block Kahnuwan And Providing And Fixing Interlocking Tile And Construction Of Boundary Wall In Shamshanghat At Village Khara In District Gurdaspur
Tender Value
6 Lakhs
Estimated cost
Bid Submission
16 May 2023
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
qadian → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Hall At Village Lakhanpur Block Kahnuwan And Providing And Fixing Interlocking Tile And Construction Of Boundary Wall In Shamshanghat At Village Khara In District Gurdaspur
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community Hall at Village Lakhanpur Block Kahnuwan :- Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. |
| 2 | Cement Concrete 1:6:12 with 40mm gauge stone aggregate. |
| 3 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 4 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 5 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 6 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in foundation and plinth. |
| 7 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 8 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete |
| 9 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 10 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) |
| 11 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 12 | Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 13 | Top khurra0.6mx0.6m for rainwater pipein 25mmthick cementconcrete1:2:4over50mmthick cementconcrete 1:8:16. |
| 14 | Bottom Khurra on ground 1.2m. x 0.6m. consisting ofbrick on-edgelaid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3. |
| 15 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 16 | Earthfilling under floorswithsurplus ordinary soilor soil containing gravel or kankarupto40%taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead . |
| 17 | Earthfilling under floorswithsurplus ordinary soilor soil containinggravelorkankar upto40%excavated from foundationandtakenonly from outsidethebuilding plinthin 15 cm layersincluding ramming,wateringand consolidating lead upto 30 metres. |
| 18 | Base course of floor consisting of 100mm thick cement concrete 1:8:16with stone Aggreegates 40mm Gauge and 100mm Fine sand filling using mechanical mixer for mixing of material. |
| 19 | Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material (SCR 14.7) |
| 20 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. |
| 21 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973. 35mm thick |
| 22 | Supplying openable steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer |
| 23 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 24 | 12.5 mm thick cement plaster 1:4.(inner Side) |
| 25 | 12.5 mm thick cement plaster 1:5.(Outer Side) |
| 26 | Finishing walls with water soluble exteriorcement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade (CSR 16.14) |
| 27 | White wash two coat |
| 28 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 29 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 30 | RECESSED PVC CONDUIT PIPE WIRING SYSTEMWITH MODULAR SWITCHES: WiringinPVCinsulatedcopperconductorsingle core FR cable (ISI marked) overall 1.5sq. mm, 1100voltsgradetobelaidinheavygaugePVC conduitpipe20mm/25mmdia.(ISI Marked) recessed in wall etc., completewith powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number ofmodules(Modularaccessories)forhavingStep typeelectronicfanregulators(twomodule) 100watts,bellpush,6Amp.2/3universalsocket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches and 16/20Amp. switches with indicator etc. and covered with Frame Plateetc.,PVCconnector(ForFanBoxandCall Bell),SteelHooks,Sheetmetalfanbox(1.6mm thickshapehexagonal),CircularjunctionBoxes (Four way PVC1½\"deep for wallsand CI3\" deep forceiling),bondingtoearthwithPVCinsulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plugcontrolpoint) andotherpettymaterialetc. includingthecostofabovematerial,cuttingand filling up of chases:- |
| 31 | Wiring fan point (With fan box) |
| 32 | Wiring light point |
| 33 | Wiring 6Amp. wall socket point |
| 34 | PVCINSULATEDFRCOPPERCONDUCTOR CABLES: SupplyanderectionofPVCinsulatedFRsingle core Unsheathed copper conductor cable (ISI marked)suitableupto1100voltsgradeconfirm to IS:694/1990leftbareinpipeorcasingofsuitable size completein allrespect asdesired bythe Engineer-in-charge:- |
| 35 | Overall size 4sq.mm (Un-sheathed) |
| 36 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked)asperIS9537:Part-III&HDPEpipes(ISI marked)asperIS:4984:1995forwiringpurposes includingbends,junctionboxes,Steelhooks,MS saddleclampsandotherpettymaterials etc.,as per PWD General Specifications:- |
| 37 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 38 | G.I. EARTHING: EarthingwithG.I.wire/ropeinG.I.pipepartly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket includingerectionofthesame,4.50metre(14.76 feet) below ground level with 20Kg. charcoal & salt mixtureetc.,upto8metreinlength(including boring & refilling). |
| 39 | Earthingwith8S.W.G.(4mmdia.)G.I.wirein15mm diaG.I. pipewithG.I. reducingsocket 50mmx 15mm (upto 8Metre in length) |
| 40 | MINIATURE CIRCUIT BREAKERS/ RCBO\"s/ RCCB\"s: SupplyanderectionofMiniatureCircuitBreaker MCB\"sforcircuitprotectionagainstoverloadand short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energylimitationclass-3,truecontactindication, label holder facility in the existing MCB distribution board as per PWD General Specificationsincluding connections with suitable size of thimbles/lugs:- |
| 41 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 42 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 43 | SHEET METAL DOUBLE DOOR DISTRIBUTIONBOARD FOR MCB/ RCBO/ RCCB\"s: SupplyanderectionofsheetmetalDoubleDoor DistributionBoardsIP43-IK09metaldoor(dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fullyinsulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wireset,cableties,blankingplatesandcircuit identifications label and of required no. of ways for mounting miniaturecircuitbreakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distributionboardwithprovisionDPMCB/RCCB/ RCBO as incomer and SP MCB\"s as outgoings and forTP&N horizontaldistributionboardwith provisionTPN/FPMCB/RCCB/ RCBOasincomer andSPMCB\"sasoutgoings)asperPWDGeneral specificationsincludingconnectionswithsuitable size of thimbles and bonding to existing earth etc:- |
| 44 | SP&N Double Door Distribution Board 4 way each |
| 45 | Supply & Erection of Durable LED Batten with Polycarbonate Housing 20 Watt Make: Crompton Input AC Frequency Hz +- 3% complete along with erection of the same with, testing,in all Respect.complete in all respect as per approved /desired by the engineer in charge of work at site . The Certification and Specification of The Led fitting should be as approved by of O/o Advisior( Technical) Govt. of Punjab Letter No: AT/2021/GL/1410-1422 Dated 16-05-2021.Make : Crompton Model : LCTLN-20-CDL, Phillips item BN021CLED22 PSU CW GR, Make: Havell\"s Item Code: LUMILINEBS20WLED865SPCWH/Halonix/ Wipro. |
| 46 | Supply and erection of Ceiling Fan 1200mm (48\") with double bearing including flexible wire & petty material etc. for connection and testing. Complete in all respects as approved and desired by the Engineer in-charge at Site: Make: Crompton High speed 5 Star Opal White/ Havell\"s VELOCITY-HS, Orient -New Breeze, Bajaj- SPEEDSTER |
| 47 | Construction of interlocking Tiles and Boundary Wall in Shamshanghat at village Khara Block Qadian:- Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications. |
| 48 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 49 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. |
| 50 | Construction of boundary Wall (6\" ht. & 9\"\" thick) |
AI Tender Summary
Tender Timeline
May 02, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender