Tender For Improvement Of Water Supply And Sanitary Installation Works Of Ranapur Chc In Ama Hospital Programme Under 5-T Initiatives
Tender Value
47.70 Lakhs
Estimated cost
Bid Submission
15 May 2023
0 days left
EMD
47700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ranapur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Water Supply And Sanitary Installation Works Of Ranapur Chc In Ama Hospital Programme Under 5-T Initiatives
BOQ
| Sl. No. | Item Description |
| 1 | Improvement of W/S & S/I to CHC Ranapur under Ranapur NAC. |
| 2 | Dismantling of old tile flooring & removing debris with initial lead & lift including cost of all labour T & P etc. all complete as per the direction of Engineer in charge. |
| 3 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge. |
| 4 | Removing old plaster, racking out joints to 12mm.deep & removing debris with initial lead & lift including cost of all labour T & P etc. all complete as per the direction of Engineer in charge |
| 5 | Dismantling orissa pan & removing debris with initial lead & lift including cleaning the line, cost of all labour T & P etc. all complete as per the direction of Engineer in charge. |
| 6 | Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification. |
| 7 | Cutting holes through brick masonry wall for taking Water supply/Sewer line & making good the damages. |
| 8 | Supplying all labour, materials, T & P for6 mm thickcementplaster in C.M. ( 1 : 4 ) overbrick work to insidesurfacesincluding cost of materials, with taxes, royalties, transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge |
| 9 | Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/2004 Sch-80 / CPVC-SDR-11 and pipe fittings of the following nominal bore with clamps including making good the wall celling and floorincluding cost of all labour T & P etc. all complete as per the direction of Engineer in charge. |
| 10 | Wall Ceilling |
| 11 | 20mm dia C.P.V.C. pipe (SDR-13.5) |
| 12 | 25mm dia UPVC-ASTM Standard (Sch-80) |
| 13 | 32mm dia UPVC-ASTM Standard (Sch-80) |
| 14 | 50mm dia UPVC-ASTM Standard (Sch-80) |
| 15 | 25mm UPVC-ASTM Ball Valve |
| 16 | 32mm UPVC-ASTM Ball Valve |
| 17 | 40mm UPVC-ASTM Ball Valve |
| 18 | 50mm UPVC-ASTM Ball Valve |
| 19 | Supplying all labour, materials, T & P for 12 mm thickcementplaster in C.M. ( 1 : 4 ) overbrick work to insidesurfacesincluding cost of materials, with taxes, royalties, transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 20 | Supplying all materials, labour, T&P for FixingofTiles size 600x600mm mm Floor Tile -Matt / Digital Floor (Premium Quality)(Make - Kajaria / Somany / Johnson) in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost oftilesetc. all complete as per specification and direction of Engineer-in-charge. |
| 21 | Supplying all labour,T&P,materials for Fixing Tiles to dados skirting & riserson 12mm. thick C.P (1:3) jointed with neat cement slurrywith cost of precast tiles.(300mm x 600mm)Digital/Digital High lighter (Premium Quality ) (Make - Kajaria / Somany / Johnson) etc. all complete as per direction of Engineer-in-charge. |
| 22 | Supplying all labour, materials and T&P for fitting and fixing of the following CP and other kinds of PH fixturesof reputed make as per standard specification (CP-Jaquar or equivalent , Porcelain - Cera or equivalent inclusive of cost of labour and materials for the works in all respect all complete as per direction of Engineer in charge. |
| 23 | EWC set (single piece) CERA Capstain) Cat No. S1013138 |
| 24 | 23 \" long Orissa Pan (OR) Calina S3010102 size - 580x440 mm with P Trap. (Cera). |
| 25 | 10 ltr. Capacity low level cistern (Cera- Ciena Premium cat. No-B1010102 ) with anti bactrical knob. |
| 26 | Corner W.Basin (400 x 400 mm)Cera-Cat-S2040123 with complete set. |
| 27 | Concord W.Basin (630 x 450 x 205mm) wih full Pedestal (height-830mm) Cera-Cat-S2040112-W.Basin Cat-S2090107-Pedestal complete set. |
| 28 | C.P. waste. (32mm - Small) |
| 29 | 32mm PVC Waste Pipe |
| 30 | 24\"x 18\" x 10\"STEEL sink single bowl(Mousumi ) |
| 31 | Sink Cock with regular swinging spout ( Table Mounted Model ) Cock with flange(CON-349KNM). |
| 32 | 15mm dia C.P. Pillar Cock long Neck with aerator ( Jaquar - Cont. - 021KN) |
| 33 | 15mmx600mm PVC connection pipe |
| 34 | C.P.grating |
| 35 | 20 mm PVC Ball Cock with Rod & Ball (PTMT- Prayag). |
| 36 | 15mm dia C.P.Angular stop cock with Wall flange (Jaquar - Cont.-059KN) |
| 37 | 15mm CP Bib Cock with Wall Flange (Jaquar - CON-047KN) |
| 38 | 15mm CP Long Body Bib Cock with Wall Flange (Jaquar - CON-107KN) |
| 39 | 20mm CP Concealed Stop Cock( Jaquar - CON-087FTK & ALD-089) |
| 40 | 15mm dia CP Pillar Cock (Jaquar -CON-011KN) |
| 41 | Over head Shower ø140mm Round Shape Multi flow with air effect(ABS Body & face plate chrome plated) with Rubit Cleaning System (Jaquar - Cat. No - OHS-1769 ) |
| 42 | C.P. Towl Rail of Size - 600 MM long (Jaquar - ACN-111SM ) |
| 43 | CP Soap dish holder (Jaquar - ACN-1131N). |
| 44 | Decorative Mirror (CERA) CAT NO-B3510106. |
| 45 | C.P.Towel Ring Square(Jaquar -ACN-1121N) |
| 46 | 15mm dia. CP Twin Bib Cock. (Jaquar- CON-041KN) |
| 47 | Allied Handshower (Health Faucet ) with 8mm dia, 1.2 meter long flexible tube & wall hook with N.R.V. (Back flow preventer) ( Jaquar ) ( ALD - 573) |
| 48 | Squatting urinal(450x350mm) |
| 49 | Flat back stall type magnum Urinal |
| 50 | Urinal Spreader |
| 51 | Supplying, fitting & fixing of S/F of 6 Ltr Capacity Geyser Machine Insta Prime |
| 52 | C.P. Glass Shelf with glass(Jaquar) AKP-35771P |
| 53 | Supply and fixing of Rajshree made PVC door shutter with frame of specific design having plain colour shutter including cost of all fittings, materials, labours & T&P etc. all complete as per direction of Engineer -in -charge. |
| 54 | Supplying, fitting & fixing up Aluminum lovers window made up aluminium frame section with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement with Aluminum grill including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge. |
| 55 | Supplying all materials labour & T & P for fitting & fixing of table top water purifier cooler stand made of Stainless steel of 304 grade 25mm & 20mm square bar and plate of 3mm thick moulded as per required size & shape including cutting, welding polishing etc. complete as per specification & direction of Engineer-in-charge. |
| 56 | Supplying fitting and fixing of Aquaguard cooler cum purifier (with all standard Accessories)Model : (120 PSS RO+UV), Make - Eureka Forbes Limited |
| 57 | Supplying all material, labour, T & P and providing power supply to water purifier-cum-cooler point including necessary wiring, lighting arrangement with fitting of tube light complete fitting providing plug point, switch board etc. all complete as per direction of Engineer-in-charge. |
| 58 | Long Point |
| 59 | 15/5 AMP Plug Point |
| 60 | Supplying and fixing of chemical earthing size of chemical earth bar 2 mtr. size of earth feet 3\"x2\"x9\" chemical compound to be used 50 Kr. |
| 61 | Extra GI flat 30x6mm |
| 62 | Provision for construction of aquaguard staging, piping arrangement etc. all complete. |
| 63 | Supply all materials Labour & T&P for RCC beam staging with required brick work, Cement plaster & Roof slab suitable for installation of 1000 ltr. capacity PVC Tank including cost of materials, with all taxes, royalties, transportation, hoisting, and pipe connection to the tanks and its testing, on the ground floor with labours, T&P etc. all complete as per the direction of Engineer-in-charge.(2nd Floor) |
| 64 | Supply all materials Labour & T&P and fitting & fixing of1000 ltrs capacity PVC tank including cost of transportation, hoisting, and pipe connection to the tanks and its testing,on the Ground floor with all materials, labours, T&P etc. all complete as per the direction of Engineer-in-charge. (Including cost of 1000 litre capacity PVC Tank (Sintex make ISI - white) with cover as per ISI specification) |
| 65 | Installation of PVC tank 1000 Lt -Three layer white IS-12701-1996 |
| 66 | Installation of PVC tank 2000 Lt -Three layer white IS-12701-1996 |
| 67 | Supply all materials Labour & T&P for Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&Petc complete as per direction of Engineer in Charge. |
| 68 | Supply all materials Labour & T&P for Wall painting 2 coats with Plastic Emulsion Paintover a coat of primer of approved shade on new work to give an even shade in with cost of all materials taxes, labour T&Petc complete as per direction of Engineer in Charge. |
| 69 | Transportation of debrises by mechanical means and dumping it within a distance of 15.00 k.m.from the work site etc. complete. as per direction of Engineer-In-Charge |
| 70 | Providing, fitting fixing offalse celling with Arm strong silhouette main runner, cross tee, wall angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw PVC plug & the Arm strong grid 2\"-0\" x 2\"-0\" suspended from ceillingetc complete with all material& all labour T&P etc as per specification approved by the Department & as per direction of EIC. |
| 71 | Providing fitting and fixing ofname plate with logo of male / female for gents & ladies toilets. ( Size - 18\" x 10\" ) |
| 72 | Supplying all materials labour T&P for providing M.S. Grill/Square bar/pipe as per following size as per specification.all complete. |
| 73 | Cleaning of drinking water storage tank / sump- by scrubbing the periphery wall surface floors and roof celling with suitable high pressure zet sprayer to remove all minerals/biological deposites including any micro.organism silts, sand, clay & etc. by spraying with zet sprayers tanclean antibacterial diluted to permissible limit rinse the surface of the tank with clean potable water and all remove wash water and sediment from all surface with vacuum and suction pumps and disinfect with low pressure spray the internal area through HAB machine including dewatering the balanced left over water in sumps (assumed 60 cm deep) by means of electrical pumps of suitable capacity before commencing cleaning of tank and final disinfection with UV radiation through UV light to destroy the floating micro organisms. |
| 74 | Supplying all labour, T&P for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated & unconsolidated rock with down the whole hammer drilling rig or combination rig as required to suit the site condition as per the direction of Engineer in charge including use of own rig with its accessories, tools & plants & consumables etc for lowering of 200mm dia PVC Pipes for housing fitted with socket and and with or without well screen as per the necessity for soft, medium, hard and boulder formation etc all complete as per the direction of Engineer in charge. (PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well) |
| 75 | Drilling of 200mm dia bore |
| 76 | Supplying all labour T&P for lowering of following size PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted and fixed up in perfectly vertical position including cutting & threading pipe and slotted pipe and supplying and fixing all jointing materials tools & plant etc complete & keeping the top of the casing pipe threaded including plugging tube well to prevent entry of foreign materials from above etc all complete as per the direction of Engineer in charge. |
| 77 | Lowering of 200mm PVC casing pipe |
| 78 | Suppling all labour T&P for cleaning and developing the bore well using their own compressor continously worked till clear & adequate discharge is obtained from the bore well including supply and use of all necessary equipments and labour etc all complete as per the direction of Engineer in charge. |
| 79 | Cost of 200mm dia ASTM-D-1785/2015 PVC (Sch-80) Pipe |
| 80 | Supplying all materials, labour and T&P for Laying in trenches UPVC Pipes with supply og required fittings including carriage of pipes to worksite etc complete as per direction of Engineer in charge. |
| 81 | 50mm dia UPVC-ASTM Standard (Sch-80) |
| 82 | 50mm Brass / GM Ball Valve (ISI Marked) |
| 83 | Supply, installation, testing and commissioning of 3.0 HP vertical submersible pump motor with head range-105 mtrs.(KSB-CORA-7D/12+2.2/22) including stand by |
| 84 | Supply, installation, testing and commissioning ofControl Panel (preferable BCH/L&T make) consisting of contactor, Over load relay(6-9.3A)-1 no., Single Phasing Priventer-1 no.,volt meter-1no.,ampre meter-1 no., Phase indicator selector switch-2nos including cost of necessary internal wiring etc all complete as specification & direction of EIC. including stand by.(Motor starter - Cat No-CPEYSAJZ) |
| 85 | Supplyand fixing of Out DoorPanel having provision for fixing of 63A Kit Kat(415V) -3 nos. 32A MCB FP-1no. Control Panel for 3HP Submersible Control Panel (Relay Range 6-9.3A) with all the arrangement for incoming and out going cabletoPump Setas per directrion of Engineer -in-charge. Panel Board Size : 500 x 600 x 200 mm Double Door. (BCH Make Cat no-BIL 50210) |
| 86 | Provision of Digital Auto function time switch with all accessories |
| 87 | Supply and fixing of power contactor. |
| 88 | Supply and fixing of maxi Rex time switch. |
| 89 | Supply and fixing of 1.5mm² copper wire |
| 90 | Supply and fixing of rotary type short circuit and overload protection( including panel) |
| 91 | Supply and fixing of GF2 module protection 200-400 |
| 92 | Supply and fixing of smart APFC controller |
| 93 | Supply and fixing of 3pin socket and switch for power supply. |
| 94 | Supply and fixing of c clips |
| 95 | Supply all materials, labour, T&P for new making of 50mm dia High Density Polyethylene Pipes conforming to IS 49841995 and Specials of following outside diameter and Class-1 to Class-3 and jointing by Fusion welding method in all respect etc complete as per direction of E.I.C. |
| 96 | 50mm dia HDPE column pipe - (PE-100, PN-6) |
| 97 | Supplying fitting fixing of 200 mm MS Bore well cover |
| 98 | Supplying fitting fixing of 50 mm dia GI Clamp for supporting Submersible Pump Motor |
| 99 | Supplying fitting fixing of 63 AMP main switch |
| 100 | Supplying all labour, materials & T&P forlowering fitting fixing of vertical submersible pump & motor of capacity 3.0 HP with 50mm dia HDPE Pipe with 50mm stell Nipple with the help of chain tounge, pipe wrench, clamp set & supporting wire including making flange joints with providing all jointing materials including jointing with delivery main and transportation of T&P etc all complete and upto satisfactory working condition as per direction of E.I.C. |
| 101 | Supplying fitting fixing of 4.0 Sq.mm x 3 core Submersible copper Flat Cable from Motor to Pannel Board |
| 102 | Supplying fitting fixing of 25 Sq.mm x 3 core Armoured Cable from existing Trandformer to Pannel Boardas per direction of Engineer-in-charge. |
| 103 | Concrete Base around Production Well & for out door pannel board- 2 nos(size - 0.90 x 0.90 x 0.45m) |
| 104 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 105 | Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete as per specification and direction of Engineer-in-Charge. |
| 106 | Providing flyash brick work with flyash bricks in cement mortar(1:4) in foundation and plinthas per direction of Engineer-in-charge. |
| 107 | Providing 12mm thick cement plaster with C.M. (1:4) with cement punning including cost, conveyance, royalties, taxes all labour, materials T&P etc all complete as per specification and direction of EIC. |
| 108 | Cement concrete (1:2:4) with 12mm.size crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead, T & P etc all complete as per specification and direction of EIC. |
| 109 | Improvement of external sewerage disposal system Septic Tank & Soak Pit, Inspection Chamber, Man Hole Chamber, Gully Trap etc. at CHC Building Dasapalla |
| 110 | Supplying all labour, T & P for cleaning and desludging of fully filled up MHC/IC includingfor removing the sludge and debrisesfrom MHC by means of rope and G.I. bucket and stacking the sludge outside the MHC, dumping the same within 100m lead and carrying the same to out side by mechanical meansetc all complete as per direction of E.I.C. |
| 111 | Supplying all labour T & P material for cleaning of PVC Sewer line by using Bamboo, Kata Rashi, Bucket etc. all complete required for the work. |
| 112 | Supplying all materials & labour and T & P for engagment of manual labours for openning of slab cover including earth work and refixing after completion of the work.required for the workall complete |
| 113 | Supplying all labour for removing the sludge from septic tank by means of rope and G.I. bucket and stacking the sludge outside the tank making temporary earthen drain & sand packingarround the tank whereever necessary etc all complete as per direction of E.I.C. |
| 114 | Construction of 100 user new septic tank |
| 115 | PART-1(Construction of 100 users RCC Septic Tank of size (Internal size 5.70 m x 2.10 m x 1.70 m)) |
| 116 | Supplying all mterial,labour T&P for earth work in excavation in foundation in all kinds of soil with initiallead and lift including fine dressing and levelingthe bed etc all complete |
| 117 | Supplying all materials labour T&P and filling in foundn and plinth with sand well watered and rammed including cost carriage and royalty of materials etc complete. |
| 118 | Supplying all materials labour T&P and providing PCC(1:3:6) with 4 cm size HG metal including cost carriage,royalty of all materials to site etc all complete as per direction of Engineer-in-charge. |
| 119 | Supplying all materials labour T&P and providing RCC (1:11/2:3) with 12 mm size CB HG chips including cost carriage royalty of all materials including hoisting and laying etc complete. (Bottom portion) |
| 120 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismentaling them after casting including cost of all materials etc complete. |
| 121 | walls |
| 122 | slab |
| 123 | Supplying all materials labour T&P and providing MS reinforcement for RCC work including cutting bending bindig and tying the grills and placing in position including cost and carriage of MS rod and binding wire 18 to 20 gauge etc complete.(Taking 1cum as1.0qtl) |
| 124 | Supplying all materials labour T&P and providing 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips for new work including cost,carriage and royalty of all materials etc complete. |
| 125 | Supplying all materials labour T&P and providing 12 mm thick cement plaster(1:4) over inside portion wall with cement punning ncluding cost,carriage and royalty of all materials etc complete. |
| 126 | Supplying all materials labour T&P and providing 16 mm thick cement plaster (1:6) over out side portion of wall including cost,carriage and royalty of all materials etc complete. |
| 127 | Supplying all materials, labour, T&P and fitting fixing of S.F.R.C.M.H.Cover (heavy duty) over RCC roof slab etc all complete as per direction of Engineer-in-charge. |
| 128 | Supplying all materials labour T&P and filling with excavated earth in excavated trench including watering ramming etc all complete as per direction of Engineer-in-charge. |
| 129 | Construction of Soak way pit (Soak-way pit size (1.50mtr.dia. x 3.00mtr.) |
| 130 | Supplying all materials, labour and T&P for construction of 1.50mtr.dia.x 3.00mtr. Deep soak-way pit with dry brick walling up to 2.70mtr. height and 25 cm thick Fly Ash brick work with cement mortar (1:6) for 0.60mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.70mtr.from bottom, covered by means of 125mm.thick R.C.C. perforated slab,50mm.thick SFRC cover including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 131 | Soak-way pit size (1.50mtr.dia. x 3.00mtr.) |
| 132 | Earth work in all kinds of soilwithin 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge. |
| 133 | Supplying all materials labour T&P and providing PCC(1:3:6) with 4 cm size HG metal including cost carriage,royalty of all materials to site etc all complete as per direction of Engineer-in-charge. |
| 134 | Supplying all materials labour T&P for fly Ash brick work laid dry in walling in foundation & plinthetc all complete as per direction of Engineer-in-charge. |
| 135 | Supplying all materials labour T&P for Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:4) with all cost, conveyance, royalties, taxes etc. all complete as per direction of Engineer-in-Charge. |
| 136 | Supplying all materials labour T&P for 12mm. thick cement plaster (1:3) with all cost, conveyance, royalties, taxes etc. all complete as per direction of Engineer-in-Charge. |
| 137 | Supplying and filling with brick khoa 50mm. To 100mm.size with all cost, conveyance, royalties, taxes etc. all complete as per direction of Engineer-in-Charge. |
| 138 | Supplying all materials labour T&P for125 mm.thick perforated R.C.C. slab (1:1.5:3) with 12mm. size h.b.g. chips with all cost, conveyance, royalties, taxes etc. all complete as per direction of Engineer-in-Charge. |
| 139 | Cost ofS.F.R.C.M.H.Coverwith frame (heavy duty) |
| 140 | Centering and shuttering:- |
| 141 | M.S. reinforcement @ 0.9 qntl./cum of R.C.C. |
| 142 | Supplying all materials,labour and T&P for constructing inspection chamber with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),flyash brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. |
| 143 | Inspection chamber size (0.75x0.75x0.45mtr.) with RCC cover |
| 144 | Supplying all materials,labour and T&P for constructing Man-hole chamber with top slab in (1:1.5:3 ) mix with foundation concrete (1:1.5:3 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),flyash brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. (including earth work ) |
| 145 | Rectangular Man-hole size (1.20 X 0.90 x 0.90mtr ) withSFRC cover |
| 146 | Extra for every additional depth of 0.10mtr. or part there of. |
| 147 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 148 | Soak way pit (1.20 m dia x 1.5 m deep) |
| 149 | Supplying all materials, labour T&P for laying of SWR PVC sewer lines with all round concrete of 1:4:8 with 0.3 mtr dia encasing including earth work excavation in all kinds of soil and refilling the trenches etc all complete inclusive of cost ofSWR PVC pipe |
| 150 | 110mm dia S.W.R. P.V.C. pipe. |
| 151 | 160mm dia S.W.R. P.V.C. pipe. |
| 152 | Supply all materials, labour, T & P and laying of following dia SWR pipes and fittings, jointing with C.M.(1:1) fixing to walls with nails bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. (Conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382 - 4 kg / cm²) pressure )(Astral / Ashirbad / Supreeme ). |
| 153 | 110 mm OD P.V.C. SWR S/S Pipe(ISI type-A) |
| 154 | 110mm dia PVCSWR P-trap . |
| 155 | 110mm dia PVCSWR Door bend . |
| 156 | 110mm dia PVCSWR Plain bend . |
| 157 | 110 x 110 x 110mm dia PVC SWR Tee |
| 158 | 110mm dia P.V.C. SWR Cowl |
| 159 | 75mm dia PVC SWR Pipe |
| 160 | 75mm dia PVC SWR Door Bend |
| 161 | 75mm dia PVC SWR Plain Bend |
| 162 | Supplying all labour T&P for cleaning and desludging of sewer line etc all complete as per direction of E.I.C. |
| 163 | upto 250mm dia sewer line |
| 164 | Supplying all labour for removing the sludge from septic tank by means of rope and G.I. bucket and stacking the sludge outside the tank making temporary earthen drain & sand packingarround the tank whereever necessary etc all complete as per direction of E.I.C. |
| 165 | Supplying all materials labour & T&P for re-constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick fly ash work in C.M. (1:5) with fly ash. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of SFRC cover slabetc. all complete as per approvedP.H.E.D. specificationand direction of Engineer-in-charge.Gully Trap Chamber.(250x250x675)mm |
| 166 | Supplying all materials labour & T&P for re -construction of brick masonry Inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, flyash brick work in C.M. (1:5) with flyash bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of 150 mm thick R.C.C. slab in C.C. (1:2:4) in 12mm C.B.H.G. chips having manhole opening of requisite including fixing of RCC manhole cover midum duty with frame including curingetc. all complete as per direction of Engineer-in-charge(750mm x 750mm x 450mm deep) |
| 167 | Supplying all materials, labour & T&P re-construction of brick masonry man hole chamber of internal size 1.20 mtr. Dia with 1.10m.deep includingof fly ash brick work in C.M. (1:5) with fly ash bricks having crushing strength not less than 75kg/cm212 mm thick cement plaster in C.M.(1:3) for both insideand outside surface with neat cement punning to top and inside surface area including benching and channelling with C.C. (1:2:4) with 12mm C.B. H.G. chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth and neat finishing with cement punning inside fixing of S.F.R. polypropylene coated step iron of approved quality and quantity at a vertical and horizontal spacing of 0.30m R.C.C. cover slab of 150mm thickness in C.C.(1:2:4) in 12mm C.B.H.G. chips having manhole opening of requisite including fixing of SFRC man hole cover Medium duty with frame including curing etc. all complete as per the approved drawing if any and direction of Engineer-in-charge. |
| 168 | Re Construction of Man Hole Chamber-(1.20mx1.10m) with SFRC Cover |
| 169 | Provision of barrier free toiletat CHC, Ranapur Medical, under Ranapur NAC..\"AMA HOSPITAL\" |
| 170 | Supplying all labour, T&P and dismantling and removing old tiled flooring including removing the debris to outside ets, all complete as per direction of Engineer-in-Charge. |
| 171 | Supplying all labour, T&P and dismantling and removing old tiled cladding from walls including removing the debris to outside ets, all complete as per direction of Engineer-in-Charge. |
| 172 | Supplying all labour, T&P for dismantling and removing doors, windows, and ventilators including removal of frames,hinges,fastenings andstacking the usefull materials for reuse and removing the debries within 50mtr lead. |
| 173 | Supplying all labour, T&P for transportation of debrises by mechanical means and dumping it within a distance of 15.00 k.m.from the work site etc. complete. as per direction of Engineer-In-Charge |
| 174 | Supplying all labour, T&P for dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead |
| 175 | Supplying all labour and T&P for cutting grooves in pucca floor and walls for taking PVC/ UPVC/ CPVC pipes and fittings and making good to the damages all complete as per specification. |
| 176 | Supplying all materials labour T&P and providing 12mm thick cement plaster in C.M. (1:4) including curing etc, all complete. |
| 177 | Supplying all materials, labour, T&P and cement concrete 1:2:4 with 12mm size C.B.H.G. chips including all cost, conveyance, royalty, taxes etc.all complete as per specification and direction of Engineer-in-charge. |
| 178 | Supplying all materials, labour, T & P and laying of following dia. water supply pipe line to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/2004 Sch-80 / CPVC-SDR-11 and pipe fittings of the following nominal bore with clamps including making good the wall celling and floorincluding cost of all labour T & P etc. all complete as per the direction of Engineer in charge. (Astral/Ashribad/Suprime). |
| 179 | 20mm dia CPVC Pipe |
| 180 | 20mm dia CPVC Brass Female Threaded Elbow |
| 181 | 20mm dia CPVC Brass Male Threadede Adaptor |
| 182 | 20mm dia CPVC Brass Female Threaded Tee |
| 183 | 20mm dia UPVC ASTM (Sch-80) pipe |
| 184 | 20mm UPVC-ASTM Ball Valve (PTMT) |
| 185 | 25mm dia UPVC ASTM (Sch-80) pipe |
| 186 | 25mm UPVC-ASTM Ball Valve (PTMT) |
| 187 | Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tileof size 600 mm x 600 mm / 400mm x 800mm ofValbon / Simpolo / R.A.K / Kajeria / Somany make( premium quality) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete. |
| 188 | Supplying all labour,T&P,materials for fittings, fixing of vetrified wall tileof size 300 mm x 600 mm ofElica / Simpolo / R.A.K / Kajeria / Somany make ( premium quality) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete. |
| 189 | Supplying, fitting & fixing the following PH fittings and fixtures of standard make & quality as per PH specification. |
| 190 | EWC set (single piece) CERA Capstain) Cat No. S1013138 |
| 191 | Concord W.Basin (630 x 450 x 205mm) wih full Pedestal (height-830mm) Cera-Cat-S2040112-W.Basin Cat-S2090107-Pedestal complete set. |
| 192 | 15mm dia C.P. Pillar Cock long Neck with aerator ( Jaquar - Cont. - 021KN) |
| 193 | 15mm dia C.P.Angular stop cock with Wall flange (Jaquar - Cont.-059KN) |
| 194 | 15mm CP Bib Cock with Wall Flange (Jaquar - CON-047KN) |
| 195 | 15mm CP Long Body Bib Cock with Wall Flange (Jaquar - CON-107KN) |
| 196 | 20mm CP Concealed Stop Cock( Jaquar - CON-087FTK & ALD-089) |
| 197 | Over head Shower ø140mm Round Shape Multi flow with air effect(ABS Body & face plate chrome plated) with Rubit Cleaning System (Jaquar - Cat. No - OHS-1769 ) |
| 198 | C.P. Towl Rail of Size - 600 MM long (Jaquar - ACN-111SM ) |
| 199 | CP Soap dish holder (Jaquar - ACN-1131N). |
| 200 | Decorative Mirror (CERA) CAT NO-B3510106. |
| 201 | C.P.Towel Ring Square(Jaquar -ACN-1121N) |
| 202 | 15mm dia. CP Twin Bib Cock. (Jaquar- CON-041KN) |
| 203 | Allied Handshower (Health Faucet ) with 8mm dia, 1.2 meter long flexible tube & wall hook with N.R.V. (Back flow preventer) ( Jaquar ) ( ALD - 573) |
| 204 | Flat back stall type magnum Urinal |
| 205 | Urinal Spreader |
| 206 | C.P. Glass Shelf with glass(Jaquar) AKP-35771P |
| 207 | Liquid soap dispensor with glass bottle (AKP-35735P) |
| 208 | Toilet Roll Holder stainless steel flap. ( ACN-1153S) |
| 209 | Wall mounted Grab Bar 600mm long Cat No-B2210106 (CERA) |
| 210 | Wall mounted Corner Grab Bar with 500 & 600mm long bars Cat No-B2210104 (CERA) |
| 211 | Wall mounted Rail (without hinge) 600x100mm Cat No-B2210102 (CERA) |
| 212 | 5\" C.P. Grating |
| 213 | Shifting of debrises from working placeto existing loading place by head load by engagingof un-skilled labour, all complete. |
| 214 | Supplying all labour, materials. T&P for applying 12mm thick polymer modified cement plaster (1:4) mixed withpolymer based water proofing compound @ 2 ltr/50 Kg of cementover a coat of bonding agent 1:1 prop (bonding agent and cement)including all cost, conveyance. royalities & taxes etc.all complete as per specification and direction of Engineer-in-Charge. |
| 215 | Provision for cleaning the existing floor & wall using sopa liquid, phinyle, bleaching powder etc, all complete. |
| 216 | Supplying all materials, labour, T&P and fitting and fixing of design granite stone tile of 20mm thick on wall& floor with moulding of edgeetc. all complete. |
| 217 | Supply and fixing of Rajshree made PVC door shutter with frame of specific design having plain colour shutter including cost of all fittings, materials, labours & T&P etc. all complete as per direction of Engineer -in -charge. |
| 218 | Providing, fitting fixing offalse celling with Arm strong silhouette main runner, cross tee, wall angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw PVC plug & the Arm strong grid 2\"-0\" x 2\"-0\" suspended from ceillingetc complete with all material& all labour T&P etc as per specification approved by the Department & as per direction of EIC. |
| 219 | Supplying all materials, labour, T&P for finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting |
| 220 | Supplying all materials, labour, T&P and Plastic emulsion painting two coats to wall & ceiling of toilets & bathroom over one coat of primer, all complete. |
| 221 | Cutting holes through brick masonry wall for taking Water supply/Sewer line & making good the damages. |
| 222 | Providing fitting and fixing ofname plate with logo of male / female for gents & ladies toilets. ( Size - 18\" x 10\" ) |
| 223 | Dismantaling of damaged cement concrete by use of breaker in wall , plaster etc all complete.. |
| 224 | Supplying fitting fixing of glass louvers of standard size & specification etc all complete as per direction of E.I.C |
| 225 | Supplying all materials labour T&P for providing M.S. Grill/Square bar/pipe as per following size as per specification.all complete. |
| 226 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 227 | Electric 300mm dia Exhaust Fan with Flap |
| 228 | Fan Point |
| 229 | 300mm dia Ceiling light |
| 230 | Light point |
| 231 | Supply all materials, labour, T & P and laying of following dia SWR pipes and fittings, jointing with C.M.(1:1) fixing to walls with nails bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. (Conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382 - 4 kg / cm²) pressure )(Astral / Ashirbad / Supreeme ). |
| 232 | 110mm OD PVC SWR S/S Pipe(ISI type-A) |
| 233 | 110mm dia S.W.R. P.V.C. Plain bend. |
| 234 | 110mm dia S.W.R. P.V.C. Door bend. |
| 235 | 110mm S.W.R P.V.C P Trap |
| 236 | 110mm dia S.W.R. P.V.C. Single Junction with door |
| 237 | 110mm dia S.W.R. P.V.C. Vent Cowl. |
| 238 | 110mm dia. PVC SWR pipe Clips |
| 239 | Supplying all materials, labour T&P for laying of SWR PVC sewer lines with all round concrete of 1:4:8 with 0.3 mtr dia encasing including earth work excavation in all kinds of soil and refilling the trenches etc all complete. (Includnig cost of pipe) (C1 standard bedding) |
| 240 | Supplying all materials labour & T&P for re-constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick fly ash work in C.M. (1:5) with fly ash. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punningincluding cost of SFRC cover slabetc. all complete as per approvedP.H.E.D. specificationand direction of Engineer-in-charge. |
AI Tender Summary
Tender Timeline
May 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender