Tender For Procurement Of Spares For Tang Hydro Ejector Assembly And Clinker Grinder Of Ash Handling System Of 210 Mw Atps, Mppgcl, Chachai., Chachai-Madhya Pradesh
TDR : 37475234
Tender Notice
Corrigendum Details
BOQ
Expired
Chachai
Madhya Pradesh
Corrigendum : Tender For Procurement Of Spares For Tang Hydro Ejector Assembly And Clinker Grinder Of Ash Handling System Of 210 Mw Atps, Mppgcl, Chachai.
Name of Work:Procurement of spares for Tang Hydro Ejector Assly& clinker grinder of Ash Handling System of 210MW, ATPS, MPPGCL, Chachai.
Sl. No.
Item Description
1
Spares for Hydroejector - (Make Indure)
2
Throat Part No. 216-012 As per drawing No. BM-III/298MOC- ALLOY CI asIS 4771 Type 1(A) (Min 4.5% NI)Hardness - 500 BHN
3
Throat Increaser MOC- ALLOY CI asIS 4771 Type 1(A) (Min 4.5% NI)Hardness - 500 BHN
4
Stud (1 set=3 no.)MOC- STEEL
5
Nozzle plate MOC- MS IS 2062 Gr.A
6
Nozzle Tip MOC- (Ceramic Lined- SS)SS -410, Ceramic(As per drawing)
7
Ring Flange MOC- MS IS 2062 Gr.A
8
Half Flange(1 set =2 no.)MOC- MS IS 2062 Gr.A
9
Spares for Clinker Grinder, Size 2\"x3\" (Make Indure)
10
Driving Gear (1 set =2 no.)MOC- CI IS :210 Gr. FG-200
11
Shaft Sleeve MOC- SS-410Harndess 350 BHN
12
Wear Ring (1 set = 4 nos.)MOC- STEEL
13
Split Lantern Ring (1 no. = 3 halfs.)MOC- BRONZE
14
Wear Plate (1set =2 nos.)MOC- ALLOY CI asIS 4771 Type 1(A) 400 BHN
15
Bearing Support (1set =2nos.)MOC- CI IS :210 Gr. FG-200
16
Grinding Roll With Shaft and Sleeve Drive(As per drawing)MOC- Driving Shaft EN8 as per BS 970 Grinding Roll MN Steel as per ASTM A128 Gr.C Hardness 229 BHN Max Shaft Sleeve SS 410 Harndess 350 BHN
17
Grinding Roll With Shaft and Sleeve Driven(As per drawing)MOC- Driven Shaft EN8 as per BS 970 Grinding Roll MN Steel as per ASTM A128 Gr.C Hardness 229 BHN Max Shaft Sleeve SS 410 Harndess 350 BHN
18
Sprocket 12 T As per Drawing No ATPS/BM -III/87Material:- EN-8
19
Sprocket 42 TAs per Drawing NoATPS/BM -III/87Material:- EN-8
20
S.S. Wire braided rubber hose pipe alongwith connectors (Male and Female each end) as per IS 10733-1983Lenth- 1.5 mtr.Connector- one side Ø20 mm internal thread Other Side- 20 mm external threadWorking Pressure- 7kg/cm2
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
