Estimate For Repairing & Renovationof Public Toilet (6 Nos W.C. & 9 Nos Urinal) Near A.N. Pal Ghat,With In Ward No 01,Under Bally Municipality [Ref: Pwd/Building, Sanitary & Plumbing [W.E.F 01/11/2017], Road & Bridge [W.E.F 01.12.2015] And Following Subse
Tender Value
1.99 Lakhs
Estimated cost
Bid Submission
15 May 2023
0 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bally → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Repairing & Renovationof Public Toilet ( 6 Nos W.C. & 9 Nos Urinal ) Near A.N. Pal Ghat, With In Ward No 01, Under Bally Municipality [ Ref: Pwd / Building, Sanitary & Plumbing [ W.E.F 01 / 11 / 2017 ] , Road & Bridge [ W.E.F 01.12.2015 ] And Following Subsequent Corrigenda And Addenda
BOQ
| Sl. No. | Item Description |
| 1 | Estimate For Repairing & Renovationof Public Toilet (6 nos W.C. & 9 Nos Urinal) Near A.N. Pal Ghat,with in ward no 01,under Bally Municipality |
| 2 | Earthwork in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m…………………………………….[Ref: P.W.D (Bldg), Page - 1, Item.- 2a ] |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidation the some by through saturation with water, ramming complete including the cost of supply of sand. (Payment to be made on measurement of finished quantity)[Ref : P.W.D (Bldg). Page- 2, Item-4] |
| 4 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.P.W.D. Bldg(Page -14 Item 1 |
| 5 | Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.With Sand Cement Mortar (1:3) 15 mm thick& 2 mm thick cement slurry at back side oftiles using cement @ 2.91Kg/Sq.m & jointfilling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorativePage 64 Item no 35 (B) Wall b i |
| 6 | Cleaning I.P.W.C. with acid. Page 85 Item No13 |
| 7 | Cleaning glazed tiles with acid. Page 85 Item No 16 |
| 8 | Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125mm with(b) Porcelain of approved make page 81 Item No 9 b |
| 9 | Supplying, fitting and fixing Squating plate with integral flushing in whitevitreous chinaware of approved make in cement concrete (6:3:1) withjhama chips complete. (Payment of concrete will be paid seperately)(i) 450 mm X 350 mm Page 80 Item No 7 |
| 10 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreouschina ware of approved make complete in position with necessary bolts,nuts etc.(b) With \"S\" trap (with vent) Page -79 Item No 3 b |
| 11 | Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position completeexcluding \"P\" or\"S\" trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mmPage 79 Item No 4i |
| 12 | Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(iii) 630 mm X 450 mm sizePage 41 Item 2iii |
| 13 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.Page 81 Item No 11 |
| 14 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayerc)(b) 1000 litre capacity Page 37 Item No 6 |
| 15 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.Page 37 Item No 10 |
| 16 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming toI.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc..White (Page 36 Item No -2) |
| 17 | Supplying, fitting and fixing bib cock or stop cock(ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS orequivalent) 15 mm Page 6Item No 7 f ii |
| 18 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)a) For Exposed WorkPVC Pipes20 mm |
| 19 | (a) For Exposed Work PVC Pipes(Dia)25 mm |
| 20 | Supplying, fitting and fixing brass ferule including connection with G.I. pipe of TATA make of following dia. and upto 450 mm. long with screw, jamnut, sockets etc. complete in all respect, including cutting in all sort of soil and filling up the20 mm Dia Page 1 Item No 1 |
| 21 | Supplying, fitting and fixing in position of G.I. pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee union, cross, etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. [Ref.: P.W.D. (S&P), WC-II, 1.11.2017, Page-3, It-2Total : 20 mm. dia Medium quality |
| 22 | Supplying,fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per sq.cm. (for water line only )ii) 20 mm dia. [PWd S & P,-1.11.2017, P-5 , Item-5 |
| 23 | Supply of PVC pipes & fittings Schedule 80 (medium duty)conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(A) PVC Pipes(Part - I).100 mmPage 13 Item No 19(III) |
| 24 | (D) Long Bend (90 Degree)(Dia)100 M.M |
| 25 | (E) Tee(Dia) 100M.M |
| 26 | (K) End Plug(Dia)100 M.M |
| 27 | Supplying, Fitting & Fixing Factory madeP.V.C. door frame of size 50 mmx47 mmwith a wall thickness of 5 mm, made out ofextruded 5 mm, PVC sheet miter cut at twocorners and joined with two nos of 1.5 mmlong brackets of 15 mm x15 mm M.S. squaretube. The two vertical door profiles are to bereinforced with 19 mmx 19 mm M.S. Squaretube of 19 gauge, weather seal to beprovided through out the frame. The doorframe shall be fixed with the wall using65/100 mm long M.S. Screws through theframe by using P.V.C fasteners. A minimumof 4 Nos of screws to be provided for eachvertical member and minimum 2 Nos for Page 115 Item No 4 |
| 28 | Supplying, Fitting & Fixing 30 mm thick bothside prelaminated Factory made solid PanelPVC Door Shutter consisting of outer framemade out of M.S. tubes of 19 gaugethickness and size 19 mmx19 mm for styles,top and bottom rails, M.S. frame shall havecost of steel primers of approved make andmanufacture, M.S. frame covered with 5 mmth. heat moulded PVC “C” channel of size 30mm th, 70 mm width out of which 50 mmshall be flat and 20 mm shall be tapered in45 degree angle on either sides formingstyles; and 5 mm th. 95 mm wide PVC sheetout of which 75 mm shall be flat and 20 mmtapered in 45 degree on the inner side toform top & bottom rail and 115 mm widePVC sheet out of which 75mm shall be flatand 20 mm shall be tapered on both sides toform lock rail. Top, bottom and lock railsshall be provided either side of the panel with10 mm (5 mmx2) th.,20 mm wide cross PVCsheet as gap insert for top rail and bottomrail sheet to be fitted in the M.S. framewelded/sealed to the styles &rails with 7 mm(5 mm+2 mm) th.x15 mm wide PVC sheetbeading on inner side and joined togetherwith solvent cement adhesive. An additional Page126Item No 16 |
| 29 | Scraping of moss, blisters etc.thoroughly from exterior surface of wallsnecessitating the use of scraper, wire brush etc.(Payment against thisitem will be made only when this has been done on the specific directionof the Engineer-in-charge)Page 198 Item No -1 |
| 30 | Removing old scales, blisters etc. of interior surface of walls,ceiling byscraping etc. and preparing smooth and even surface with rendering orcement mortar (1:2) (as necessary), to make the surface suitable forreceiving distemper. (Payment against this item will be made only whenthis has been done on the specific direction of the Engineer-in-charge). page 198 Ite No -4 |
| 31 | Applying interior grade Aryclic Primer of approved quality and brand on plastered o cencrete suface old or new surface to recive distamper / Aryclic emulsion paint including scaping and preparing the surface throughly ,complete as per manufactures specificationi) Water based interior grade Acrylic PrimerrPage no 196 item 8 bi |
| 32 | Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receivedecorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly,complete as per manufacturer\"s specification and as per direction of theEIC.a) Two CoatsPage 158 Item no 15 b |
| 33 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer\"s specification)including cleaning and smoothning of surface.Two CoatsPage 196 item no 10 |
| 34 | Protective and Decorative Textured exteriorhigh class matt finish paint of approvedquality, composed ofspecialTharmoplasticResincontaining fine crystallineadditivesderive from Granite as per manufacturer\"sspecification and as per direction of EIC tobe applied over acrylic primer as required.The rate includes cost of material, labour,scaffolding and all incidental charges butexcluding the cost of primer. Page197 Item No 16 |
| 35 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Page - 200, Item -1, a |
| 36 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary, :(b) On steel or other metal surface :With other than hi-gloss of approved quality.i) Onecoats ( with white)Page - 200, Item – (B i), |
| 37 | Supplying, fitting & fixing of Aluminium fixed partion wall of allaluminium sections viz top, bottom and side member, intermediatemember, glazing clip made of Aluminium Alloy Extrusions conforming toIS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, anglescrews etc. including labour charges for fitting and fixing of aluminiumfixed partition wall with glass / panel board all complete as perarchitectural drawings and direction of Engineer-in-charge.(Excluding cost of glass/ panel board,10-12 Micron thickness Annodizing film.Natural white.Note : for estimate purpose construction wing may consider weight ofAl-Sections for Partition wall @ 5.0 Kg per Sq.M]Page 247 Item No 17 b |
| 38 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987; (A) clear, toughened glass conforming to IS: 2553-1992 (part-II)i) 6mm thick Page 249 item No -24 |
| 39 | Supplying, fitting and fixing porcelain toilet paper holder of approved makewith wooden spindle as necessary.(i) Roll type size 250 mm X 125 mm Page 83 Item No -23 i |
| 40 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(i) 25 mm dia. and 450 mm long Page 22 Item No 82 Item No 22 a i |
| 41 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thickwith silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm Page 82 , Item No 19 |
| 42 | Supplying, fitting and fixing liquid soap container.(a) Cromium plated. Pg 82 Item 17 a |
| 43 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with drybrick work upto 1.6 metre from the bottom having 150 mm intermediate cement brickwork (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with20mm thick cement plastering (1:4) to inside face upto the depth of cement brickwork, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L.and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including fillingbottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size)including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stonechips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C.manhole cover (heavy type)of approved make supplied, fitted and fixed in the coverslab with necessary fittings, making nacessary arrangements for pipe connections,excavation of wellincluding shoring, dewatering and removing the exess earth fromthe premises as per direction complete in all respect with all costs of labour andmaterials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and1.00m insidePage89 Item No 4 |
| 44 | Supplying and Planting of different plant / trees ( Supplyingwell grown plants bushy and healthy, minimum height asspecified i.e. exposed height including all leads & lift,carriage, handling, manuring, applying presticide andfertilizer etc.i) Furcaria veriegated 10-12 leaves in height 20-30cm inearthen pots of size 25cm.Page 261 Item No 9 i |
| 45 | x) Ficus blakii (F. Vivicon) well branched (Bushy) of height 120cm - 135 cm in earthen pot of size 30cm.Page 261 Item No 9 X |
| 46 | Providing waterproofing treatment over concrete roofsurface (old or new) by the application of two coats of slurryprepared with latex of approved brand, water and cement inthe proportion of (LP.W. Cement - 1:4:6) by volume, withbrush in a time gap of minimum 4(four) hours to 14(fourteen)hours between the two layers, laying 20mm thick and sandand cement consolidated plaster (1:4) admixed withPlastocrete Super of approved brand 0.2% by weight ofcement, laying flat 1st class Brick Bats / Bricks over themortar keeping a gap of 10-20 mm between two bats, fillingthe vertical joints with the aforesaid mortar, providing asecond layer of 20 mm thick sand and cement plaster (1:4)admixed with Plastocrete Super as above over the bricklayer, the top surface of the treatment should be chequered toprovide the antistrip property(a) By Bricks (cement 25.66 kg/ Sq.m) Page 89 Item No 1 a |
| 47 | ADD GST @ 18% |
| 48 | ADD CESS @ 1% |
AI Tender Summary
Tender Timeline
Apr 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender