Public Health Engineering Department-PHED has published Tender For Annual Stage Contract For Repairs, Replacements Of Damaged Worn Out Spare Parts Of Departmental Tata Model 1109. For 6 No Vehicles. Submission Date for this Tender is 09-05-2023. Vehicle Hiring Service Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | ENGINE |
2 | Top overhauling of the engine, Job includes machining of the engine head, p/f of piston rings, tappet springs, head gasket, job includes assembling the engine head, filling of fresh m oil , checking of nozzles and testing on full load, job includes allied works. |
3 | General overhauling of the engine. Providing and fitting of parts which includes piston set with ring set, valve set, valve guide set, connecting rod set, Gudgeon pin set, bearing set, big end bearing set, sleeve set,head gasket, packing set and required machining job,job includes filling of fresh oil, mounting of engine on the engine enclosure , assembling of parts, testing on full load skilled labour charges and allied works. |
4 | Providing/ fitting of Engine Head |
5 | Providing/fitting of Oil pump assembly |
6 | Providing/fitting of Water body complete assembly |
7 | Providing/fitting of M.oil plug |
8 | Providing/fitting of Temperature plug |
9 | P/fitting of engine head gasket with machining job |
10 | Providing /fitting of timing chain with adjuster |
11 | Providing/fitting of Water body pulley |
12 | Providing/fitting of Water body gasket |
13 | Providing/fitting ofDiesel filter assembly |
14 | P/F of Fan Belt |
15 | P/F of dynamo belt |
16 | P/F of Steering belt |
17 | Providing/fitting of Diesel pipe set |
18 | Providing/fitting of Accelerator cable |
19 | Providing/fitting of Fuel injector pipe |
20 | Providing/fitting of Main diesel pipe |
21 | P/fitting of Fuel Return pipe |
22 | Providing/fitting of Engine mounting |
23 | P/F of M. Oil Pipe |
24 | Providing/fitting of water separator |
25 | P/F of F.I Pump sensor |
26 | P/F of cam sensor |
27 | Clutch system |
28 | Dismantling /fitting of clutch system |
29 | P/F of clutch plate |
30 | P/F of pressure plate |
31 | P/F of flywheel ring |
32 | P/F of Flywheel assembly |
33 | P/F of clutch bearing |
34 | P/F of clutch oil seal |
35 | P/F of clutch cable |
36 | P/F of Clutch paddle spring |
37 | P/F of Clutch paddle |
38 | P/F of clutch housing |
39 | P/F of Clutch cylinder (upper) |
40 | P/F of Clutch cylinder (lower) |
41 | P/F of clutch bolt |
42 | Gear Box |
43 | P/F of Main Drive Shaft |
44 | P/F of Counter Shaft |
45 | P/F of Gear adjuster |
46 | P/F of 1stspeed Gear |
47 | P/F of 2ndspeed Gear |
48 | P/F of 3rdspeed Gear |
49 | P/F of 4th speed Gear |
50 | P/F of 5thspeed Gear |
51 | P/F of Reverse Gear |
52 | P/F of Gear Box Sleeve Set |
53 | P/F of Gear box Roller Bearing. |
54 | P/F of Block Bearing. |
55 | P/F of Needle Bearing. |
56 | P/F of Synchronizer gear set |
57 | P/F of Gear Box Oil Seal Set |
58 | P/F of Bonding Tube |
59 | P/F of Top cover Gear box Lever |
60 | P/F of Gear box Lever Kit |
61 | P/F of Gear box housing bolt |
62 | P/F of Gear box housing |
63 | P/F of Gear box cable |
64 | P/F of Complete gear oil change |
65 | Differential |
66 | P/F of Crown Wheel Pinion with nut |
67 | P/F of Pinion Bearing. |
68 | P/F of Spider lock |
69 | P/F of Star Kit Complete |
70 | P/F of Differential Cage |
71 | P/F of Differential Stud |
72 | P/F of Star washer Big /Small |
73 | P/F of Differential Joint |
74 | P/F of Main Oil Seal |
75 | P/F of Gear Oil up to Required level |
76 | P/F of Rear axle |
77 | Propeller Shaft |
78 | P/F of U-J Cross |
79 | P/F of Cross Holder |
80 | P/F of Universal joint assembly |
81 | P/F of HalfYoke |
82 | P/F of Yoke and Teeth joint |
83 | P/F of Central Bearing. Assembly Complete |
84 | P/F of Universal shaft |
85 | P/F of Shaft Bolts with Nuts and Washer. |
86 | Complete Greasing |
87 | Suspension System |
88 | P/F of F/W King Pin sets with Bush, Bearing, CottersandShim |
89 | P/F of Tie Rod End Set |
90 | P/F of leaf spring shackle |
91 | P/F of lower bracket |
92 | P/F of Central Bolt Front |
93 | P/F of Central Bolt Rear |
94 | P/F of Front leaf springMain |
95 | P/F of Front leaf Spring 2nd |
96 | P/F of Front Leaf Spring AUX |
97 | P/F of Front leaf Spring 3rd |
98 | P/F of Front leaf Spring 4th |
99 | P/F of Front leaf Spring 5th |
100 | P/F of Front leaf Spring 6th |
101 | P/F of Front leaf Spring 7th |
102 | P/F of Rear leaf Spring main |
103 | P/F of Rear leaf Spring 2nd |
104 | P/F of Rear leaf Spring 3rd |
105 | P/F of Rear leaf Spring 4th |
106 | P/F of Rear leaf Spring 5th |
107 | P/F of Rear leaf Spring 6th |
108 | P/F of Rear leaf Spring 7th |
109 | P/F of support arm |
110 | P/F of Leaf Spring Washer |
111 | P/F of Leaf Spring Pin with Bush |
112 | P/F of Leaf Spring U-Bolt |
113 | P/F of Leaf Spring Bracket |
114 | P/F of stabilizer |
115 | Complete Wheel alignment |
116 | P/F of coil spring |
117 | P/F of Front wheel shock absorber |
118 | P/F of Rear wheel shock absorber |
119 | Re- tensioning of Leaf springs |
120 | Fuel Injection Pump |
121 | Complete Overhauling / calibration of FI Pump with P/F of required parts |
122 | P/F of Nozzle |
123 | P/F of F.I pipe |
124 | P/F of Diesel return pipe |
125 | P/F of Rotary Pump Unit |
126 | P/F of Cam Plate |
127 | P/F of Lever Shaft |
128 | P/F of Guide Bushing |
129 | P/F of Oil Seal |
130 | P/F of T.D Piston |
131 | P/F of Cross Disc |
132 | P/F of Roller |
133 | P/F of D.P Head |
134 | P/F of V.E Pump Repair Kit |
135 | P/F of Acc Bush |
136 | Steering System |
137 | P/F of P.S Rotor |
138 | P/F of Steering bush |
139 | P/F of Steering gear box assembly complete |
140 | P/F of Steering Repair kit |
141 | P/F of Steering shaft |
142 | P/F of Hydraulic Pipes |
143 | P/F of Steering Assembly Complete |
144 | P/F of Steering Bearing. |
145 | P/F of SteeringCross |
146 | P/F of Steering Pit Man Arm |
147 | P/F of Steering pinion |
148 | P/F of Tie rod end |
149 | P/F of Steering Oil |
150 | P/F of Steering Bolt |
151 | Turbo System |
152 | P/F of Turbo Core Assembly |
153 | P/F of Turbo charger kit |
154 | P/F of Replacement of turbo charger |
155 | P/F of Turbo Hose |
156 | Self Starter |
157 | P/F of Armature Assembly |
158 | P/F of Self-Carbon brush set |
159 | P/F of Solenoid switch |
160 | P/F ofself Bendex Drive |
161 | P/F of Self-clutch fork |
162 | P/F of Self-bush set |
163 | P/F of Self housing |
164 | P/F of Self Bearing |
165 | Providing of Battery (12V 25 plate 150AH) of Exide or equivalent |
166 | Fabrication/Providing/Fitting of battery box made out of MS Strips and angle Iron of required size and thickness as per requirement |
167 | P/F of Replacement of battery poles |
168 | P/F of Battery terminals /Lead sets |
169 | Alternator Assembly |
170 | P/F of Rectifier plate |
171 | P/F of Field coil set |
172 | P/F of Carbon Brush Set |
173 | P/F of Cut out |
174 | P/F of Comerator switch |
175 | P/F of Armature Assembly |
176 | P/F of Oil Seal |
177 | P/F of Bearing |
178 | Radiator Assembly |
179 | P/F of Radiator cooling Fan |
180 | P/F of Radiator Cup |
181 | P/F of Hose pipe Sets with Clamps |
182 | Repairs/soldering to fin and radiator tanks |
183 | P/F of Radiator Foundation and Bolt |
184 | P/F of New Radiator Complete |
185 | Servicing of Radiator with chemical solution |
186 | Electrical Works |
187 | Replacement of Old worn out/damaged wiring set |
188 | P/F of New Horn Assembly Double |
189 | P/F of Head Light Assy. |
190 | P/F of Head Light bulb |
191 | P/F of Tail light assy. |
192 | P/F of Indicator assy. |
193 | P/F of bulb |
194 | P/F of Roof Light |
195 | P/F of Fog Lamp |
196 | P/F of Combination Switch |
197 | P/F of Wiper blade assy. (Set of two) |
198 | P/F of Ignition switch |
199 | P/F of Complete Dash board cluster |
200 | P/F of Wiper blade machine |
201 | Vehicle scanning using engine analyzer |
202 | P/F of ECU/ECM |
203 | Replacement of fuse |
204 | Filters |
205 | P/F of M Oil Filter |
206 | P/F of By Pass Filter |
207 | P/F of Water Separator |
208 | P/F of Air Filter set |
209 | P/F of Fuel Filter |
210 | All oil Change ( Oils to be provided by the Deptt.) |
211 | Brake and wheel System |
212 | P/F of Brake Slack Adjuster |
213 | P/F of Front & Rear Cylinder Assy. |
214 | P/F of Master Cylinder assy. |
215 | P/F of Dual Brake Valve Assy.(Booster) |
216 | P/F of Air Pressure Pipe |
217 | P/F of Brake Actuator |
218 | P/F of Hand brake cable with lever |
219 | P/F of Brake pipe |
220 | P/F of ABS sensor |
221 | Repairs/servicing of ARV |
222 | P/F of Complete pressure release valve |
223 | P/F Diaphragm for servo |
224 | P/Finner Wheel oil seal |
225 | P/F of outer wheel oil seal |
226 | P/F Inner wheel bearing |
227 | P/ F Outer wheel bearing |
228 | P/F of Brake lining set |
229 | P/F of brake shoes spring |
230 | P/F of wheel spindle |
231 | P/F of wheel drum |
232 | P/F of wheel side plate |
233 | P/F of wheel hub bolt with nut |
234 | Tyre puncture repair |
235 | Wheel alignment |
236 | Complete greasing of the vehicle |
237 | Window Glasses and Front wind shield |
238 | P/F of Front Glass/Wind Shield |
239 | P/F of Door Glass Right/ left |
240 | P/F of Rubberfor Front Glass Fitting |
241 | P/F of Bonding Tube |
242 | P/F of Side mirror assy. |
243 | P/F of Cabin glass |
244 | P/F of Cabin rear view mirror |
245 | Dewatering Pump- diesel driven |
246 | General overhauling of the engine, P/F of parts which includes piston with ring set,valve set,valve guide set, connecting rod,Gudgeon pin,bearing set, big end bearing, sleeve,head gasket,packing & required machining job.The job includes filling of fresh oil,assembling of parts,testing on full load skilled labor charges & allied works. |
247 | Overhauling to F.I Pump including replacement of parts. |
248 | P/F of Diesel pipe |
249 | P/F of F.I nozzle |
250 | P/F of Moil filter |
251 | P/F of Diesel filter |
252 | P/F of M. oil Change( Oil to be provided by the Deptt.) |
253 | P/F of Impeller |
254 | P/F of Oil Seal |
255 | P/F of Complete Gasket Repair kit |
256 | P/F of Ball valve 65mm (Bronze ISO certified of PR PN-40) |
257 | P/F of Body of dewatering unit |
258 | P/F of Socket 65mm GI |
259 | P/F of Elbow 65 mm GI |
260 | P/F of Diesel Tank |
261 | P/F ofHandle |
262 | P/F of Gate valve 65 mm CI |
263 | P/F of Coupling Pulley set with Nut, Bolt and Washer |
264 | Providing of Canvass pipe roll (Reputed make) 65mm (ISI certified) (30meters of length) |
265 | Providing of Conduit pipe 65 mm (reputed make) |
266 | Water Tank Body and Chassis |
267 | Repairs to Water tank Body. Cutting of damaged portion with the help of Gas cutter& then denting by hammer beating/heat treatment .Welding of new patches/sheets where ever required cutting of the damaged bolts & nuts with the help of gas cutter and lifting the water Tank with crane, placing at a safe place straightening the damaged portion of chassis with the help of Mechanical Jacks, hammers, gas cutter & manual skilled labor & patching , finishing and painting |
268 | Repairs to chassis by way of Providing/Fitting& welding ofnew supporting members to chassis, Setting the chassis in position |
269 | Annual Passing |
270 | Painting of Whole body in departmental color. Scratching /Removing old Paint with the help of chemical treatment then applying putty wherever required, Two coats red oxide & then applying 2 coats of epoxy paint coat inside water tank & two coats of enamel paint outside incl. Letter writing |
271 | Denting/Painting of cabin (Inside and outside)/ Body in departmental color. Scratching/Removing old Paint with the help of chemical treatment then applying putty wherever required, Two coats red oxide & then applying two coats of paint job includes welding, grinding/finishing of surface, incl. letter writing. |
272 | Denting by Hammer Beating /heat treatment as required and repairing of front Bumper |
273 | Denting by Hammer Beating /heat treatment as required and repairing of front Show |
274 | Denting by Hammer Beating /heat treatment as required and repairing of Fender |
275 | Denting by Hammer Beating /heat treatment as required and repairing of Window |
276 | Denting by Hammer Beating /heat treatment as required and repairing of foot rest with patching |
277 | Denting by Hammer Beating /heat treatment as required & repairing rear Mud guard with Patching |
278 | P/F of Front Bumper |
279 | P/F of Window regulator Machine |
280 | P/F of Door Handle outside |
281 | P/F of Door handle inside |
282 | P/F of Door trim |
283 | P/F of Door Lock |
284 | P/F of Seat cover new making and fitting |
285 | Replacement of front tyre of required size of make MRF/Goodyear/ Bridge Stone /Ceat/JK/Appollo. |
286 | Replacement of rear tyre required size of make MRF/ Goodyear/ Bridge Stone/ Ceat / JK/Appollo. |
287 | Fabrication/P/F of water tank partition, inside the tank as per size and shape of the tank with reinforcement of angle iron as base so as to fix MS sheet of 2 mm thickness including cost of wastage |
288 | Fabrication/P/F of MS channel {Safety Girder ) of required size with painting |
289 | Fabrication /P/F of mud guard of 3 mm MS sheet with angle iron reinforcement as per requirement |
290 | Fabrication /P/F of tool box of 3 mm MS sheet and angle iron frame/ reinforcement as per requirement with hinges ,handle and locking system |
291 | Silencer |
292 | P/F of silencer Assembly |
293 | P/F of Silencer Clamps set |
294 | P/F of Silencer Joint |
295 | P/F of Silencer Gas Welding and Patching |
296 | P/F of Silencer Main Body |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail