Info Tech Corporation Of Goa Limited has published Setting Up Of Vidhya Samiksha Kendra For Goa Samagra Shiksha At 1St Floor (Math Lab-F15) Scert Building, Alto Porvorim - Goa. (Civil, Interior, Internal Electrification And Hvac. Submission Date for this Tender is 15-05-2023. Electrification Work Tenders in North Goa Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-May-2023 | Revised BOQ | BOQ | 15-05-2023 |
| Sl. No. | Item Description |
| 1 | INTERIOR |
| 2 | MAIN CONFERENCE TABLE (Size-3000mm(RM L) X 1200mm(W)X 750MM(HT) Providing & fixing in position Conference table in 19 mm thick Marine BWP (boiling water proof) plywood for top & vertical supports & finished with 4 mm veneer & all exposed edges to be finished with 38x12mm thick wood lipping having a6mm design groove & with 3 coats or more of melamine polish to match the shade of veneer with necessary hardware & labour.The table top will be fixed with a modular pop-up box tomake provisionfor wire management to take care of basic wiring requirement for power data- voice,VGA switches.The work will include cleaning, placing in position, etc. complete.All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 3 | STAFF CHAIRS Supplying and placing in position armed revolvingmedium back chair of approved make and colour with HR (high-resilience) foam seat and back BIFMA(The Business & Institutional furniture manufactures association) compliant and having features like knee tilt syncronous mechanism with 4 positionlocking & anti shock feature. PU adjustable Armrests, nylon base with PU castors. The back and seat upholstered in fabric. Rate shall include of all iron mongeries hardware,fittings,fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. |
| 4 | FULLY GLASS PANELLED PARTITION AND GLASS DOOR Providing & fixing full height glazed partition upto 2400 mm height with 12 mm thk toughened glass, 35x12mm thick teak wood beading on all sides , The beading shall be finished with three or more coats of melamine polish (glossy/matt) including final coat of buffing till the required finish is achieved .Solid sandwich partition above lintel level & upto slab bottom using 38 X 50mm treated Salwood frame having grid spacing at 600mm centre to centre both ways & sandwiched by 8 mm thk plywood & 12 mm gypsum on both sides. All hidden framework to be painted with black japan paint. 100mm in height plywood skirting to be finished with 1 mm thk laminate of approvedmake/ color/ sample on both the sides. Glass door shall be made using 12 mm thick toughened glasswith 100 mm high plywood frame with laminate finish, fixed using double action floor spring, top patch, bottom pivot in SS brush finish and s.s. 304 grade handles of size 200mm. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 5 | VERTICAL BLINDS Providing & fixing in position vertical blinds 100 mm wide approved fabric and of approved make, colour with head rail of 25mm height and 47mm wide extruded high strength anodised aluminium alloy section. End control unit state of art reduction ratio of 3:5:1 for a very smooth operation of the blind. It shall include all necessary fittings and fixtures like tilt rod, tilter chain , carrier/ runner, spacers, installation bracket, cord weight, cord, bottom mechanism consisting of weight and chain etc. complete. All material shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer. |
| 6 | SINGLE SHUTTER DOOR IN PARTITION (SIZE - 1200 mm (L) X 2400 mm (HT) Providing & fixing in position frameless factory made solid core water proof flush door shutter of size 1200mm x 2400mm x 35 mm thick & finished with 1mm thick laminate of approved colour & texture on both sides &teak wood lipping of size 37x12mm on edges of shutter. The door shall be fixed on SS. brush finished brass butt hinges & provided with a surface mounted hydraulic door closer, SS matt finish concealed mortise lock case with lever handle, profile thumb turn cylinder (with key outside & thumb turn inside) with key hole, PVC door buffer & SS brush finish door stopper. All exposed teak wood lipping shall be finished with 3 coats or more of melamine polish (Matt/Gloss) to match the colour/ shade of the laminate including final coat of buffing till the required finish is achieved.All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 7 | DESK (TABLE SIZE: 3000 mm(L) X 500 mm(D) X 750 mm(HT) Supplying and installing in position Table of approved make , colour and size as per drawing having 19mm marine ply with 1 mm thick laminate with 2 mm pvc hot pressed enbossed lipping of matching /approved colour on all underside and unlimited area of 2 module computer table with low height front partition in training room HEIGHT FRONT PARTITION (TABLE SIZE: 3000 mm(L) X 500 mm(D) X 750 mm(HT)(FRONT PARTITION SIZE:3000 mm(L) X 600 mm(D) X 900 mm(HT), arrangement for footrest , keybaord tray , complete , all works complete as per the drawing/ Image, technical specification and direction of the Engineer . |
| 8 | Providingand laying , Permanently static conductive pressed homogeneous vinyl flooring with carbon backing, as per (EN 649) in rolls of 2m wide, thickness of 2mm as per (EN429), PVC Vinyl flooring(imported) having Carbon backing and carbon particles in the design with total weight notless than2950 g/m2 as per having(EN 430), XR PUR (polyurethane reinforced) ,Abrasion group P:=4,0mm3, residual indentation approx. 0.02 mm, castor wheel test qualified, dimensional stability =0.40%,static electrical charge < 2kv, good resistance of scratch, slip, chemical and fire, doesn’t favor in growth of fungi. Electric resistance shouled beas per EN 1081 and ESD approved. IQ Toro SC is a high-quality static control flooring with an electrical resistance of 5 x 104–106 ohms. (2m x 23m). 100% recyclable. VOC emission after 28days of installation should lower than =100µg etc. complete as per direction of Engineer in charge. |
| 9 | File Storage:- Supplying and installing in position storage in 19 mm thick Marine BWP (boiling water proof) plywood with shutters in 19mm thick BWP (boiling water proof) plywood fixed on SS. brush finished brass"L" hinges & 100 mm height SS 304 grade handles. The cabinet to have 19mm thick plywood shelves fixed on shelf buttons, back sheet in 8mm plywood & finished with 1mm thick laminate externally and 0.8mm thick laminate internally. All exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of laminate &with necessary labour, S.S brush finish hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Size 1200x450x1200mm(HT)) |
| 10 | CABINET IN CONFERENCE ROOM (Size- 1800mm(L) x 600mm(W) x2400mm(HT) Providing & fixing in position Cabinet in conference room in 19 mm thick Marine BWP (boiling water proof) plywood with 25 mm thickness louvered sandwich shutters in 12mm thick BWP (boiling water proof) plywood framework with 6mm thick BWP ( boling water proof) plywood on both sides fixed on SS. brush finished brass"L" hinges & 100 mm height SS 304 grade handles and having the louvers in 38x6mm thick wooden lipping. The cabinet to have 19mm thick plywood shelves fixed on shelf buttons, back sheet in 8mm plywood & finished with 3mm thick veneer with 3 coats or more of melamine polishexternally and 0.8mm thick laminate internally. All exposed edges to be finished with teak wood lipping with 3 coats or more of melamine polish to match the shade of veneer &with necessary labour, S.S brush finish hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 11 | FROSTED FILM FOR CABIN GLASSES Providing and fixing frosted Glass film partly opaque partly translucent on glass internal partitions and doors as per approved sample ,design ,drawing, specifications & direction of the Engineer with necessary glue, if required, labour,fixing in position etc.complete..All the materials shall be of approved make. |
| 12 | TEXTURE PAINT Providing and applying Texture paint of approved color and texture. Before applying texture paint, surface smoothness has to be checked properly and base should be well prepared and non absorbent. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 13 | Providing and fixing false ceiling made out of 3x1.5 G.I Channel frame support structure screwed at every 18" on to the hanged intermediate channel which is fixed at every 3", with support from slab using suspender and fixing of perimeter on the sides of the wall and PVCS panes of 12" in width and 10" long which is locked from one end and screwed on other using dry wall screws on grid frame work. all work complete as per technical specification and direction of the engineer. |
| 14 | CIVIL |
| 15 | Dismantling wood work ofsectional area40 sq.cm. and above wrought framed and fixed in frames, other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.) |
| 16 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. |
| 17 | ELECTRICAL |
| 18 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates,suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required."(c) Group C-- with Cat A Modular Accessories |
| 19 | "Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 20 | Supplying and fixing stepped type electronic fan regulator on the existing modularplate switch box including connections but excluding modular plate etc. as required".(a) Cat A |
| 21 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required."(a) 1 or 2 Module ( 75 mm x 75 mm) Cat A |
| 22 | "Installation,earthing, testing and commissioning of ceiling fan including wiring the down rodof standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required. |
| 23 | "Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required |
| 24 | "Supply and erecting"J" typeMild Steel fanhook fabricated out of 35 X 6 mm flat stripsuitable for rafters completewith coach screws etc as required."(c)For 8 inches rafter size |
| 25 | Supplying and fixing suitable size modular PVC box with modular plate and coverin front on surface or in recess including providing and fixing 3 pin 5/6 Amodular socket outlet and5/ 6 Amodular switch connection painting etc. as required."(a) Cat A |
| 26 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and15/16 Amodular switch connection painting etc. as required."(a) Cat A |
| 27 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator). |
| 28 | (a) 4 way single door Cat A |
| 29 | "Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) |
| 30 | (c) 6 way (8+18), double door, Horizontal type Cat A |
| 31 | Supplying and fixing following rating four pole 415 V isolatorin the existing MCB DB complete with connections testing and commissioning etc as required |
| 32 | "(a) 40 A, Cat A |
| 33 | "(b) 63 A, Cat A |
| 34 | "Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. |
| 35 | "(a) SP, Cat A |
| 36 | "Supplying and fixing 40 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. |
| 37 | "(e) TPN, Cat A |
| 38 | "Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. |
| 39 | (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 40 | (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 41 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 42 | (j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit) |
| 43 | (k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit) |
| 44 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 45 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 46 | Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required"(a) Cat 6 |
| 47 | Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required."(a) 2 Pair |
| 48 | Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) RG-6 |
| 49 | "Supplying and fixing of following sizes ofrigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) includingcutting the wall and making good the same in case of recessed conduit as required. |
| 50 | "(a) 20 mm |
| 51 | (b) 25 mm |
| 52 | "Supply of4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. |
| 53 | 4 Core 6 sq.mm |
| 54 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required. |
| 55 | (3) 4 x 6 Sq. mm. |
| 56 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required |
| 57 | Supply and providingChemical earthing system (Pipe in pipe type)withOuter pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled withhighly crystalline conductiveand anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode |
| 58 | "(a) 3 metres length electrode |
| 59 | Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications. |
| 60 | Supplying and laying 25 mmx 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 61 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories."(a) Cat A |
| 62 | Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete |
| 63 | Supply and Fixing of 36W 2x2LED Light Fixtures |
| 64 | Supply and Fixing of 6U Rack |
| 65 | Supply and Fixing of 24 Port Switch |
| 66 | HVAC |
| 67 | Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/SAC |
| 68 | Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC |
| 69 | Voltage Stabilizers |
| 70 | Supplying and erecting fully automatic line voltage stabilizer, buck and boost type for operation on input voltage 160 to 270 V and output voltage 200 to 250 V rated for, 5 kVA maximum load and with voltmeter, selector switch, 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for Air Conditioner of 2.0 TR |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
