Military Engineer Services-MES has published Tender For Certain Repairs To Flooring, Plastering, Plumbing Etc Of Ilp Location And Installations Under Age B/R (P-1) At Faridkot Mil Stn. Submission Date for this Tender is 20-05-2023. Plumbing and Sanitary Work Tenders in faridkot Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 2 | S&Fin repair 15mm bore stop valve, cast copper alloy, chrominium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for GI outlet/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 3 | S&F in repair 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed. |
| 4 | S&F in repair 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 5 | S&F in repairpillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed |
| 6 | S&F in repair 15 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rodand high density plastic ball,screwed for iron pipe and fixed in position complete all as specified and directed . |
| 7 | S&F in repair 20 mm bore PTMT ball valve (float valve), high pressure with epoxy coated aluminium rodand high density plastic ballscrewed for iron pipe and fixed in position complete all as specified and directed. |
| 8 | S&F in repair 25 mm bore PTMT ball valve (float valve), high pressure with epoxy coated aluminium rodand high density plastic ballscrewed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed. |
| 9 | S&F in repair PVC waste pipe, 32 to 40mm for WHB/Sink /urinal up to floor trap and fixed complete all as specified and directed. |
| 10 | S&F in repair stainless steel grating of any size (as per existing)with or without waste hole completeall as specified & directed. |
| 11 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in positionincluding PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed. |
| 12 | S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in positionincluding PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed. |
| 13 | S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed. |
| 14 | S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore and PVC connection 15mm size, 450mm long with PTMT nut and other end fixed complete all as specified and directed. |
| 15 | Taking up or down 15mm bore steel water tubing alongwith connections in any situation complete all as specified and directed . |
| 16 | Taking up or down 20mm bore steel water tubing alongwith connections in any situation complete all as specified and directed . |
| 17 | Taking up or down 25mm bore steel water tubing alongwith connections in any situation complete all as specified and directed . |
| 18 | M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etccomplete all as specified and directed |
| 19 | All as per Srl item No. 18 here-in-before butexcept pipe |
| 20 | M&L for Steel water tubing of 20 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etccomplete all as specified and directed |
| 21 | All as per Srl item No. 20 here-in-before butexcept pipe |
| 22 | M&L for Steel water tubing of 25 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etccomplete all as specified and directed |
| 23 | All as per Srl item No. 22 here-in-before butexcept pipe |
| 24 | S&F in repairswivel shower of PTMT, of any colour for fixing with 15mm pipe, (minimum weight 40 grams) complete all as specified & directed. |
| 25 | S& F in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour including fixing to steel pipecomplete all as specified and directed. |
| 26 | S&F in repair 15mm dia, brass chromium plated wall mixer for mixing hot & cold water, screwed down for iron pipe complete all as specified and directed . |
| 27 | Dismantling CI/PVC pipe of 75/100mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortarcomplete all as specified and directed. |
| 28 | S&F 75mm bore PVC (SWR) pipes ,single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 29 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 30 | S&F in repair PVC (SWR) floor trap, 75 mm dia, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed |
| 31 | S&F in repair PVC (SWR) "P" trap of 110mm bore complete all as specified and directed |
| 32 | S&F in repair vitreous Chinasquatting pan "Orissa pattern", size 580mm x 440mm white / coloured, with integral foot rest including flush pipe and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floorscomplete.all as specified and directed. |
| 33 | S&Fin repair vitreous china wash down water closet pan (pedestel pattern/EWC/long pan) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover,white in colour with mild steel chromoum plated hinging and "P" or "S" trap device complete all as specified and directed. |
| 34 | S&F in repair PVC low level flushing cistern, white, 10 litre capacity, valveless syphonic action type with float, handle includingbracketscomplete all as specified and directed . |
| 35 | S&F in repair vitreous china bowl urinal ,flat back of size 465x355x265mm , white,with grating and union for discharge pipeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes,32mm boe flush pipe & half turn valve 15mm bore complete all as specified & directed . |
| 36 | S&F in repair chromium plated Jet spray with 1.50 m long flexible tube andfixed complete all as specified and directed. |
| 37 | S&F in repair chromium plated brass health faucet with 1.0mtr tube & hook (braided tube) complete all as specified and directed. |
| 38 | S&F in repairsinks with drainage board, madeof 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm,plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed |
| 39 | S&F in repairs Toilet paper Holder Brass finish glossy fixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed. |
| 40 | Taking down wooden shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after easing, adjusting and also refixing of builders hardware as required including renewal of unserviceable screwsetc complete all as specified and directed. |
| 41 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified anddirected. |
| 42 | S&F in repair 100mm long butt hinges, medium weight, cold rolled mild steel (ISI marked)fixed with screws complete all as specified and directed. |
| 43 | S&F in repair brass mortice lock, vertical type, size 100 mm, 2 levers complete all as specified and directed. |
| 44 | S&F in repair 250 mm long aluminumalloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloycomplete all as specified & directed. |
| 45 | Taking down existing aluminium frame shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after making necessary repair etc complete all as specified and directed. |
| 46 | S&F in repairdoor closer hydraulically regulated, Aluminium (Diecast body), designation No 3, universal type, suitable for door shutter 1000mm to 1200mm width and weight between 61 to 80 kg complete all as specified and directed. |
| 47 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made out of mild steel heavy duty & fixed complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified |
| 49 | M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 50 | M&L for 3 mm thick, frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 51 | M&L for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with rubber beading (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed. |
| 52 | S&F looking mirror of 5mm thick selected quality glass, size 600mmx450mm, bevelled edge,mounted on 6mm thick commercial plywood or hard board covered with 25mm wide PVC/wooden frame moulding and teak wood beading all around and fixed to wallwith chromium plated brass screws and cup washes complete all as |
| 53 | S&F in repairbrass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screwsincluding wooden/plastic beads complete all as specified and directed. |
| 54 | S&F in repair PTMT cabinet with mirror of size 622x422mm complete all as specified & directed. Make: Prayag Cat No. 555 or equivalent make as given in PS |
| 55 | Taking down of chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed. |
| 56 | Taking down of chowkats or frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed. |
| 57 | Taking down shutters of any descriptionexc 1 sqm and n. exc 2 sqm each complete all as specified and directed. |
| 58 | S&F Pressed steel rectangular frames,of size of frame 105X60 mm fordoors with one or more rebates , including necessary fixing lugs, hinges, lock strike plate over a shop coat of zinc chromate primer complete all as specified and directed. |
| 59 | S&F Pressed steel rectangular frames,of size of frame 125X60 mm fordoors with one or more rebates , including necessary fixing lugs, hinges, lock strike plate over a shop coat of zinc chromate primer complete all as specified and directed. |
| 60 | M&L forPCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks, fixing of hold fasts etc including necessary formwork complete all as specified and directed |
| 61 | S & F Solid PVC door frame of size 50x47mm, made out of 5mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 62 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out ofMS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width & stick inside withsolvent cement forstile and plaincolour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail.Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style and rail with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. |
| 63 | S&F 35 mm thick,2nd class hard wood, plain framed panel shutters (two number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers, fitted to chowkats complete all as specified and directed . |
| 64 | S&F Factory made 35mm thick, 2nd class hardwood (Hollock), glazed and skeleton shutters, open rebatedand prepared to receive gauge /gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members as specified in clause 8.24 (a) of MES SchedulePart-I Section -8 complete all as specified and directed. |
| 65 | M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 66 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified anddirected. |
| 67 | S&F in repair300mm mild steel, ordinary rat tail spring(Helical door spring) including roller androller plate complete all as specified and directed. |
| 68 | S&F in repair 150mm size, aluminiun anodised barrel tower bolts of extruded section complete all as specified & directed. |
| 69 | S&Fin repair aluminium handle of size 125mm,fabricated type, anodised complete all as specified & directed. |
| 70 | S&F factory made box type steel window with side hung shutters including box type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete with glazing bars dovetailed or weldedand with one shop coat of zinc chromate primer complete all as specified and directed. |
| 71 | S&F factory made box type steel window with side hung shutters including box type hinges with steel handle and 2 Nos 150mm long mild steel tower bolt,fixing lugs etc complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 72 | M&L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applyingtwo coats of synthetic enamal paintcomplete all as specified and directed. |
| 73 | S&F in repair MS powder coated decorative drapery rod (colour as approved)20mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed. |
| 74 | DismantlingWall and ceiling boards (fibre,pulp, insulation) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified & directed. |
| 75 | S&F gypsum board 7mm thick in ceiling fixed with screw as permanufacturer"s instructions, plain / coloured fixedon steel snap grid (Powder coated bottom side) with "T" and "L" (26mm x 24mm x 1mm thick) size of grid 600mm x 600mm placed in ceiling"L" section fixed with wall usingPVC rawl plugsand steel screws @ 600mm centre to centreand suspended / provided 14 gauge (2mm) dia galvanised bars not less than 1.00 Sqm hanging arrangementsand level includingadjustable clips all as specified and directed and as specified in clause 10.38 of MES Sechudle Part-Icomplete all as specified and directed. Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of ceiling |
| 76 | S&F PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer"s instruction etc.complete all as specified and directed. Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of wall |
| 77 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and on joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge Note:-Quoted rate of the item deemed to be included for taking down and refixing (as per existing)minor electric fittings and fixtures (if any) on the surface of wall |
| 78 | S&F 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed . |
| 79 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified anddirected |
| 80 | Demolition of brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 81 | M&L for Brick work with sub class "B" bricks, straight or curved on plan, exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 82 | All as per Ser item No 81 here-in-before but except bricks |
| 83 | M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 84 | M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed . |
| 85 | M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed . |
| 86 | M&L for 5mm thick rough cast plaster over and including 10mm thickrendering in cement mortar 1:4 on fair faces of brick or concrete surface completeall as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat. |
| 87 | M&L for Rendering 10 mm thick in cement mortar 1:4 on ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 88 | M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 Coarse Sand) the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement Plaster 1:1/2:2 (1 Cement : 1/2 Coarse sand : 2 Stone chipping 10mm nominal size) in panels with grooves all round as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note :Payment for providing grooves shall be made separately) |
| 89 | M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 90 | M&L for preparation of newly plasteredsurfaces of wallsand applying two coats of cement base paintcomplete all as specified and directed. |
| 91 | M&L for preparation of newly rough cast plastered surfaces of walls and applying two coats of cement base paintcomplete all as specified and directed. |
| 92 | M&L for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening complete all as specified and directed. |
| 93 | M&L forPreparation of new surfaces plastered of walls and applying two coats of white wash on wall complete all as specified and directed. |
| 94 | M&L for Preparation of new surfaces plastered of ceiling and applying two coats of white washcomplete all as specified and directed. |
| 95 | Dismantlingfloor,hearth or wall tilling including cement mortar bedding (but not backing)and rubbish of the premises complete all as specified and directed. |
| 96 | S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed |
| 97 | S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed |
| 98 | M&L for Coloured glazed ceramic tile 450x300x7 mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 99 | Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, skirting, aprons etc complete all as specified and directed. |
| 100 | M&L for Machine cut kota stone slab,20-25 mm thick as in flooring , set and jointed in cement slurry over & including screed of 20 mm thick in cement mortar 1:6 andpointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified & directed. . |
| 101 | All as per Ser Item No 100 here-in-before but except kota stone complete all as specified and directed. |
| 102 | S&F Machine cut kota stone slab 20-25 mm thick as in skirting, set and jointed in cement slurry over & including15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed . |
| 103 | M&L for Granite (of any type)machine cut, 20mm thick, bedded and jointed with grey cement slurry over and including screed of 20mm thick in cement mortar 1:6 and pointed with white cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror polishing complete all as specified and directed |
| 104 | M&L formarble work 18mm to 20mm thick of any shade (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade of the marble over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 105 | M&L for cutting, rubbing and polishing of existing Kota stone/mosaic flooring complete all as specified and directed. |
| 106 | M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates)as in flooring complete all as specified and directed |
| 107 | M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed. |
| 108 | M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping,bed blocks and similar worksincluding slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 109 | M&L for sand filling under floor 25mm thick with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed . |
| 110 | M&L for Machine pressed precast concret interlocking paver block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement andpigment all as specified and directed . |
| 111 | All as per Ser Item No 110 here-in-before but except paver blockscomplete all as specified and directed. |
| 112 | M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates)as in louvers and jallies in between pillars, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4complete all as specified and directed. |
| 113 | M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed . |
| 114 | Raking out joints/pointing in cement mortar to brick work or brick tiles laid flat, in floors, surface channels, roofs etc complete all as specified and directed |
| 115 | M&L for flush pointing to bricks laid flat or brick tiles in pavings in floors, roofs, aprons etc in cement mortar 1:3complete all as specified and directed . |
| 116 | S&F in repair 2mm thick Fibre glass reinforced translucent sheeting with two corrugations side lap, fixed with coach screw and washers in roof, wall etc complete all as specified and directed. |
| 117 | S&F in repair Pre painted galvalume aluminium zinc coating GI basedcorrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 118 | S&FPre painted galvalume aluminium zinc coating GI basedplain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 119 | S&FPre painted galvalume aluminium zinc coating GI basedplain steel sheet 0.5 mm thick and 600 mm wide of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 120 | M&L fordismantling structural steel workcomplete all as specified and directed . |
| 121 | S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165)complete all as specified and directed |
| 122 | S&F 6 mm thick asbestos cement (corrugated / semi corrugated) sheetsas in roof/wall covering and fixed with L-type or J-type or cranked hook bolts etc complete all as specified & directed |
| 123 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically providedand disposal of rubbish to a distancen.exceeding 250 metre complete all as specified & directed. |
| 124 | M&L for RCC 1:1.5:3,type A1 (using 20mm graded crushed stone aggregates) as chajjas,beams,floors,parapet and similar suspended workscompleteall as specified anddirected. |
| 125 | M&L for applying anti rust remover on existing exposed reinforcement surfaces and applying two coats of anti rust paint after cleaning the surfaces of reinforcement complete all as specified and directed |
| 126 | M&L for Mild steel TMT bars10mm dia and over , cut to length, bent to shape as required, including cranking, bending and binding with& including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed . |
| 127 | M&L for use and waste of form work to faces of parapet surfaces, soffits of suspended slabs , such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick(Horizontal or slopping) for rough finished flat surfaces of concrete complete all as specified and directed . |
| 128 | S&F anodised aluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minimum thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fastenerscomplete all as specified and directed.. |
| 129 | S&F Powder coated aluminum (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately ) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixing with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and the directed . Note :-A Sum of Rs. 72461.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 26 & 27 (Schedule of credit) of Tender Documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
