Military Engineer Services-MES has published Tender For Repair To Wooden Furniture Under Bso Of Ge (West) Ferozepur Cantt. Submission Date for this Tender is 25-05-2023. Furnitures Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-05-2023 |
| Sl. No. | Item Description |
| 1 | Bed Plywood Supply & fixing of the following components/parts as in replacement of Bed Ply/Bed Niwar using 1stclass seasoned hard wood free from knots and defects sheesham with one coat french polish including dismantling of unserviceable components/parts complete all as specified, shown on drg and as directed by Engineer-in-Charge.(FD-245 & 246). Replacement of unserviceable head side board covered with 3.00mm thick ply wood Sheesham face one side complete with short rail all as specified and shown on drg. |
| 2 | All as per ser item No 1.00 here in beforebut replacement foot side board complete all as per shown on drg and directed by Engineer -in - Charge. |
| 3 | All as per ser item No 1.00 here in before but replacement of unserviceable ply wood top 12mm thick commercial(BWR) ISI mark (Make- Archid/Action Tessa/ Century) complete all as per shown on drg and directed by Engineer -in - Charge. |
| 4 | All as per ser item No 1.00 above but replacement of unserviceable long rail complete all as per shown on drg and directed by Engineer -in - Charge. |
| 5 | All as per ser item No 1.00 above but replacement of unserviceable Stiffner complete all as per shown on drg and directed by Engineer -in - Charge. |
| 6 | Polishing to Bed newar and Bed ply top with french polish wooden portion exposed to direct vision except top ply wood complete all as per shown on drg and directed by Engineer -in - Charge. |
| 7 | Supply and fix of sheesham wood triangular support with nails to strengthen any component / part of bed plywood. |
| 8 | Table dressing ladies with mirror Supply & fixing of the following components/parts of table dressing ladies including dismantling unserviceable components all asspecified and shown on drg.(FD-378 & 251)replacement of unserviceable looking mirror 5mm thick alongwith frame including one coat fench polish on the frame all as per shown on drg and directed by Engineer -in - Charge.Make of mirror:- ModiGuard/ Atul/ Swastic |
| 9 | All as per item No.8.00here in before but replacement of broken Sliding glass 5mm thick clear sheet glass fixed in existing channel including adjustment of channel to make sliding freely all as per shown on drg and directed by Engineer -in - Charge. |
| 10 | All as per item No.8.00here in before but replacement of unserviceable drawer with CP Handle including one coat french polish on wooden portion all as per shown on drg and directed by Engineer -in - Charge. |
| 11 | All as per item No.8.00here in before but replacement of back ply wood with 6mm thick BWR ISI marked commercial ply (Make- Archid/Action Tessa/ Century) all as per shown on drg and directed by Engineer -in - Charge. |
| 12 | M& L for French polishto table dressing ladies complete all as per shown on drg and directed by Engineer -in - Charge. |
| 13 | Table dressing Gents with mirror Supply & fixing of the following components/parts of table dressing Gents including dismantling unserviceable components all asspecified and shown on drg.(FD-31,230,379) Replacement of unserviceable new top made of 18/19mm thick prelaminated partical board exterior quatily teak shade one side, Make- Novapan, wintuff, Action Tessa all as per shown on drg and directed by Engineer -in - Charge. |
| 14 | All as per item No.13.00 here in before but replacement of unserviceable /looking mirror 5mm thick alongwith frame and back ply including one coatfench police on the frame all as per shown on drg and directed by Engineer -in - Charge. . Make of mirror modi Guard/Atul/Swastic |
| 15 | All as per item No.13.00 here in before but replacement of unserviceable drawer with CP Handleall as per shown on drg and directed by Engineer -in - Charge. |
| 16 | All as per item No.13.00 here in before but replacement of back plywood with 6mm thick ISI Marked commercial plywood all as per shown on drg and directed by Engineer -in - Charge. |
| 17 | M&L for French polish to table dressing Gents complete all as per shown on drg and directed by Engineer -in - Charge. |
| 18 | Table 900x600x760 with drawer/without drawer Supply & fixing of the following components/parts of table 900x600x760mm using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components Drg. (FD-42 & FD-231). Replacement of unsv top of table 900x600x760mm should be 18mmthickprelaminated particle board exterior quality teak shade one side, Make : Novapan, wintuff, Action Tessa including 4 mm thick Teak wood beading all round the top complete all as shown in drawing and directed by Engineer-in-Charge |
| 19 | All as per item No18.00 here in before butleg all as per shown on drg and directed by Engineer -in - Charge. |
| 20 | All as per item No.18.00 here in before but top long rail all as per shown on drg and directed by Engineer -in - Charge. |
| 21 | All as per item No.18.00 here in before buttop side rail all as per shown on drg and directed by Engineer -in - Charge. |
| 22 | All as per item No.18.00 here in before but stiffener complete "H" type all as per shown on drg and directed by Engineer -in - Charge. |
| 23 | All as per item No.18.00 here in before butdrawer complete with SS Handle including one coat french polish all as per shown on drg and directed by Engineer -in - Charge. |
| 24 | All as per item No.18.00 here in before but triangular support all as per directed by Engineer -in - Charge. |
| 25 | M& L for French polish to table 900x600x760mm wooden portion complete all as per shown on drg and directed by Engineer -in - Charge. |
| 26 | Table centre Supply & fixing of the following components/ parts of table centre using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable componentsdrg.(FD-29 FD-134 FD-235).Replacement of unserviceable top made of 18/19mm thick prelaminated particle board exterior qualityteak shade one side, (Make- Novapan, wintuff, Action Tessa)including 4mm thick Teak wood beading all round the top complete all as shown in drawings and directed by Engineer-in Charge |
| 27 | All as per item No.26.00 here in before butleg all as per shown on drg and directed by Engineer -in - Charge. |
| 28 | All as per item No.26.00 here in before buttop long rail all as per shown on drg and directed by Engineer -in - Charge. |
| 29 | All as per item No.26.00 here in before but top short rail all as per shown on drg and directed by Engineer -in - Charge. |
| 30 | All as per item No.26.00 here in before butstiffener complete H type all as per shown on drg and directed by Engineer -in - Charge. |
| 31 | All as per item No 26 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen table centreall as directed by Engineer-in-Charge |
| 32 | M& L for French polish to table centre wooden portion exposed to direct vision complete all as per shown on drg and directed by Engineer -in - Charge. |
| 33 | Teapoy wooden Supply & fixing of the following components/parts of teapoy wooden using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as per specified and shown on drg.(FD-34 & FD-232) Replacement of unserviceable top made of 18/19 mm thick prelaminated particle board exterior qualityteak shade one side with 4mm thick teak wood beading all round the top all as per shown on drg and directed by Engineer -in - Charge. |
| 34 | All as per item No.33.00 here in before butleg all as per shown on drg and directed by Engineer -in - Charge. |
| 35 | All as per item No.33.00 here in before buttop long rail all as per shown on drg and directed by Engineer -in - Charge. |
| 36 | All as per item No.33.00 here in before but top side rail, all as per shown on drg and directed by Engineer -in - Charge. |
| 37 | All as per item No.33.00 here in before butstiffner complete H type all as per shown on drg and directed by Engineer -in - Charge. |
| 38 | All as per item No 33 here in bofore but supply and fixing of sheesham wood triangular support with nails to strengthen Teapoy Wooden all as directed by Engineer-in-Charge |
| 39 | M& L for French polish to teapoy wooden portion exposed to direct vision complete all as perdirected by Engineer -in - Charge. |
| 40 | Table Writing Supply & fixing of the following components/parts of table writing using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components shown in drawings.(FD-249,268 & 275) Replacement of unserviceable top made of 18/19mm thick prelaminated particle board exerior quality of teak shade one side (Make- Novapan, wintuff, Action Tessa)including 4mm thick Sheesham wood beading all round the top complete all as shown in drawings and directed by Engineer-in Charge. |
| 41 | All as per ser item No 40.00 here in beforebutleg all as per shown on drg and directed by Engineer -in - Charge. |
| 42 | All as per ser item No 40.00here in beforebuttop long rail all as per shown on drg and directed by Engineer -in - Charge. |
| 43 | All as per ser item No 40.00here in beforebuttop short rail all as per shown on drg and directed by Engineer -in - Charge. |
| 44 | All as per ser item No 40.00 here in beforebutstiffner all as per shown on drg and directed by Engineer -in - Charge. |
| 45 | All as per ser item No 40.00here in beforebut drawer with SS Handle including one coat fench polish for table writing all as per shown on drg and directed by Engineer -in - Charge. |
| 46 | All as per ser item No 40.00 here in beforebut door shutter with SS Handle, bottom portion, side wall and back ply completeof table writing all as per drg and specified and directed by Engineer-in-Charge. |
| 47 | Supply and fixing of sheesham wood triangular support with nails to strengthen Table Writing all as directed by Engineer-in-Charge |
| 48 | M& L for French polish to table writing portion exposed to direct vision complete all as per shown on drg and directed by Engineer -in - Charge. |
| 49 | Table Dining 6 Pers Supply & fixing of following components/parts of table dining for 6 persons using 1st class seasoned hard wood Sheesham free from all knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed by Engr-in-Charge.(FD-30,239,273) Replacement of unserviceable top made out of prelaminated particle board 18/19mm thick exterior quality (Make- Novapan, wintuff, Action Tessa)with 4 mm teak wood beading all round the top as per shown on drg and directed by Engineer -in - Charge. |
| 50 | All as per ser item No 49.00 here in beforebutleg all as per shown on drg and directed by Engineer -in - Charge. |
| 51 | All as per ser item No 49.00 here in beforebuttop front rail all as per shown on drg and directed by Engineer -in - Charge. |
| 52 | All as per ser item No 49.00 here in beforebut Side rail all as per shown on drg and directed by Engineer -in - Charge. |
| 53 | All as per ser item No 49.00 here in beforebutStiffener all as per shown on drg and directed by Engineer -in - Charge. |
| 54 | Supply and fix of sheesham wood triangular support with nails to strengthen table dinning. |
| 55 | M& L for Polishing with French polish to table dining for 6 persons, wooden portion exposed to direct vision |
| 56 | Table Dining 8 Pers Supply & fixing of following components/parts of table dining for 8 persons using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components allas specified and directed by Engr-in-Charge:-(FD-30,239,273) Replacement of unserviceable top made out of prelaminated partical board 18/19mm thick exterior quality (Make- Novapan, wintuff, Action Tessa) with 4mm Sheesham wood beading all round the top all as per shown on drg and directed by Engineer -in - Charge. |
| 57 | All as per ser item No 56.00here in beforebut leg all as per shown on drg and directed by Engineer -in - Charge. |
| 58 | All as per ser item No 56.00here in beforebuttop front rail all as per shown on drg and directed by Engineer -in - Charge. |
| 59 | All as per ser item No 56.00here in beforebutside rail all as per shown on drg and directed by Engineer -in - Charge. |
| 60 | All as per ser item No 56.00 here in beforebutStiffener all as per shown on drg and directed by Engineer -in - Charge. |
| 61 | Supply and fix of sheesham wood triangular support with nails to strengthen table dinning 8 pers. |
| 62 | Polishing with french polish to table dining for 8 persons, wooden portion exposed to direct vision complete all as specified. |
| 63 | Chair Dining Supply & fixing of following components/parts of chair dining using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specifiedDrg : (FD-16, 20,228, 279 & FD/MAP-II/05) Replacement of unserviceable front leg all as per shown on drg and directed by Engineer -in - Charge. |
| 64 | All as per ser item No 63.00 here in beforebutleg all as per shown on drg and directed by Engineer -in - Charge. |
| 65 | All as per ser item No 63.00 here in beforebutfront / back seat rail all as per shown on drg and directed by Engineer -in - Charge. |
| 66 | All as per ser item No 63.00 here in beforebut side seat rail / back leg top stiffner 02 Nos all as per shown on drg and directed by Engineer -in - Charge. |
| 67 | All as per ser item No 63.00 here in beforebut stiffener "H" type all as per shown on drg and directed by Engineer -in - Charge. |
| 68 | All as per ser item No 63.00 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen Chair dinning. |
| 69 | All as per ser item No 63.00 here in before but supply and fixing of supporting stiffner of size 25mm x 25mmwith 2 Nos brackert between both side rail to strengthen Chair dinning MAP. |
| 70 | Polishing with french polish to chair dining, wooden portion exposed to direct vision complete all as specified. |
| 71 | Chair Writing: Supply & fixing of following components/parts of chair writing using 1st class hardwood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed(FD-56M,FD-280). Replacement of unserviceable front leg all as per shown on drg and directed by Engineer -in - Charge. |
| 72 | All as per ser item No 71.00 here in beforebutrear leg all as per shown on drg and directed by Engineer -in - Charge. |
| 73 | All as per ser item No 71.00 here in beforebut front/ side/ back seat rail all as per shown on drg and directed by Engineer -in - Charge. |
| 74 | All as per ser item No 71.00 here in beforebutback rest all as per shown on drg and directed by Engineer -in - Charge. |
| 75 | All as per ser item No 71.00 here in beforebutstiffener H type completeall as per shown on drg and directed by Engineer -in - Charge. |
| 76 | All as per ser item No 71.00 here in beforebutarms all as per shown on drg and directed by Engineer -in - Charge. |
| 77 | M& L forFrench polish to chair writing afterabove parts complete all as directed by Engineer -in - Charge. |
| 78 | Chair Easy Supply & fixing of following components/parts of chair easy using 1st class hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components of drg : (FD-17& 229). Replacement of unserviceable front/ Rear leg all as per shown on drg and directed by Engineer -in - Charge. |
| 79 | All as per ser item No 78.00 here in beforebutfront / Side/ back seat rail as per drawing. |
| 80 | All as per ser item No 78.00 here in beforebutarms as per drawing. |
| 81 | M& L for French polish to chair easy afterof above parts complete all as directed by Engineer -in - Charge. |
| 82 | Canning (Chair Dining, Chair Writing, Chair Easy) Removing old unserviceable cane plastic from chair dining(Drg No FD-15,20,228,279) and supply and recaning with 2.0 to 2.5 bmm mm wide plastic cane woven in godrej pattern with white/pale cream colour cane and perimeter work with 3.5 to 4.0 mm wide plastic cane. Make of cane : MPI (Premier)/SHAH or equivalent. All as specified and shown on drg and directed by Engineer-in-Charge . |
| 83 | All as per item82 here in before but chair writing.(FD-56M,280) |
| 84 | All as per item82 here in before but chair Easy. (FD-17,229) |
| 85 | Canning ( Chair Varandah) Taking down of unserviceable plastic canned / Newar/ PVC Seat & hard rubber shoes from chair verandah and apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.(FD-359) all as per shown on drg and directed by Engineer -in - Charge. |
| 86 | Repairing of chair varandah including cutting, welding, turning , bending etc all as directed by Engineer-in-charge. |
| 87 | Re-canning of chair verandah back and seat with cane plastic 4mm wide semi round white colour make : SHAH/PRIMER brand in mat pattern all as specified and shown on drawing.(FD-359) |
| 88 | S&F new hard rubber shoes including taking down the same fromleg of chair verandah of approved quality .(FD-256 & FD-359) all as per shown on drg and directed by Engineer -in - Charge. |
| 89 | PVC Seat & Back (Chair Varandah Drg No. FD/MAP-II/15)Taking down unserviceable plastic PVC Seat & back from chair verandah MAP and S&F new Seat & back of chair verandah, made out of 4 mm thick PVC moulded alongwith 4x10mm ribs & 90x10mm grooves as shown on drgs. the weight of seat / Back shall not be less than 0.90 Kg/Make : AMKO/Swastik |
| 90 | Apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.(FD/MAP-II/15) all as per shown on drg and directed by Engineer -in - Charge. |
| 91 | Taking down of unserviceable conduit pipe from chair verandah MAP and Supply & Fixing duly welding 20 guage tube conduit pipe 15/16 mm thick between the seat and all UNSV place of chair varandah rest all directedby Engr-in-charge. |
| 92 | Replacement of PVC Seat (Chair Dining Drg No. - FD/MAP-II/05) :Taking down of UNSV PVC seat of chair dining & S&F new Seat made out of 4 mm thick PVC moulded alongwith 4x10mm ribsas shown on drgs. Make : AMKO/Swastik/Cello |
| 93 | Side Board Supply & fixing of the following components/parts of side board including dismantling of unserviceable components all as specified and shown in drawings.(FD-241,371,372,1112).Taking down UNSV thetop/ Bottom and S&F new Top/Bottom of side board,made of 18/19 mm thick prelaminated particle board (Make- Novapan, wintuff, Action Tessa) of teak shade including4 mm thick Teak wood beading all round the top with one coat french polish on beading complete all as shown in drawings and directed by Engineer-in Charge. |
| 94 | All as per ser item No 93.00 here in beforebutshutter bothside left & right made of prelaminated particle board sheesam facewith 4 mm Teak wood beading with one coat french polish on beading as directed by Engineer-in Charge.. |
| 95 | All as per ser item No 93.00 here in beforebutdrawer with CP Handle all as shown in drawings and directed by Engineer-in Charge. |
| 96 | All as per ser item No 93.00 here in beforebutback ply wood 6 mm thick BWR grade all as shown in drawings and directed by Engineer-in Charge. |
| 97 | All as per ser item No 93.00 here in beforebutmatalic knob by CP Handle as per directed by Engr-in-charge. |
| 98 | M& L for French polish to side boardportion exposed to direct vision of wooden component/parts restall as per directed by Engr-in-charge. |
| 99 | Hat Stand With Mirror Supply & fixing of the following components/parts of Hat stand with mirror, including dismantling of unserviceable components all as specifiedand shown on drg. (FD-233,361&362). S&Fback ply wood 6 mm thick as per directed by Engr-in-charge. |
| 100 | All as per item No.99.00 here in before but front ply wood 3.5 mm thick teak face as per directed by Engr-in-charge. |
| 101 | All as per item No.99.00 here in before butlooking mirror of hat stand as per directed by Engr-in-charge. |
| 102 | All as per item No.99.00 here in before butcopper oxide steel hookes of size 120x75mm as per drg and directed by Engr-in-charge. |
| 103 | M& L for French polish to hat standing with mirror portion exposed to direct vision rest all as per directed by Engr-in-charge. |
| 104 | Peg Table Supply & fixing of the following components/parts of peg tableusing 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components all as specifiedand shown on drg.(FD-25,26,236,277&384).S&F top of pegtablemade from 18/19mm prelaminated particle board of teak shade one side (Make- Novapan, wintuff, Action Tessa)including 4 mm thick Sheesham wood beading all around the top complete all as shown in drawings and directed by Engineer-in Charge. |
| 105 | All as per item No 104.00 here in before but leg as per drg and directed by Engineer-in Charge. |
| 106 | All as per item No.104.00 here in before but top long rail as per drg and directed by Engineer-in Charge. |
| 107 | All as per item No.104.00 here in before but top short rail as per drg and directed by Engineer-in Charge. |
| 108 | All as per item No.104.00 here in before butstiffner complete H type as per drawing and directed by Engineer-in Charge. |
| 109 | All as per item No.104.00 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen Table Peg all as directed by Engineer-in-Charge |
| 110 | M& L for French polish to peg table wooden portion exposed to direct vision complete all as specified and directed by Engineer-in Charge. |
| 111 | CHAIR DINING CUSHIONED Supply and fixing in replacement of unserviceable Front leg of Chair Dining MAP using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge |
| 112 | All as per Ser item No. 111 here-in-before but Rear leg |
| 113 | All as per Ser item No. 111 here-in-before but side rail. |
| 114 | All as per Ser item No. 111 here-in-before but back rail. |
| 115 | All as per Ser item No. 111 here-in-before butstiffener "H" type. |
| 116 | All as per Ser item No. 111 here-in-before but Foam cushion 75 mm thick and 32 density (Make of foam Sleep well/cool foam/Feather foam) duly covered with tapestry cloth (Rate of cloth will be not less 102/- RM),quality and colour approved by Engr-in- Charge / GE. |
| 117 | Taking out UNSV ply of seat and Supply and fix new 12mm thick commercial ply of seat of chair dining cushioned. Rest all as per Drg and directed by Engineer in charge. |
| 118 | Supply and fix of sheesham wood triangular support with nails to strengthen Chair dinning cushioned. |
| 119 | Polishing to chair dining cushionedMAP with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and shown on drawing |
| 120 | TABLE BED SIDE MAP Supply & fixing in replacement of unsv top made out of 18mmthickprelaminated particle board exterior quality with PVC edging / teak woodall round thetop oftable bed side MAP including dismantling of unsv components all as specified shown on drg.(FD- FD/E6/MAP/15(R) and directed by Engr-in-charge |
| 121 | All as per Ser item No. 120.00 here-in-before but side wall, rest all as per Drg and directed by Engineer-in Charge. |
| 122 | All as per Ser item No. 120.00 here-in-before but rear wall of 6mm plywood and polishingcomplete rest all as per Drg and directed by Engineer-in Charge. |
| 123 | All as per Ser item No. 120.00 here-in-before but front part of bottom drawer complete with SS handle, Rest all as per drawing. |
| 124 | All as per Ser item No. 120.00 here-in-before but of front part of upper drawer, completewith SS Handle, Rest all as per drawing |
| 125 | All as per Ser item No. 120.00 here-in-before butTelescopic Channel of 1 mm thick on both sides of Table Bed side MAP complete as per drawing and directedby Engr-in-charge. |
| 126 | All as per Ser item No. 120.00 here-in-before butCP Handle complete as per drawing and directedby Engr-in-charge. |
| 127 | All as per Ser item No. 120.00 here-in-before but18 guage thick black powder coated 18 mm Square frame work pipeas per drawing and directedby Engr-in-charge. |
| 128 | All as per Ser item No. 120.00 here-in-before butPVCrubber shou of 18 mm Square frame pipeas directedby Engr-in-charge. |
| 129 | CHAIR SCHOOL WITH HAND BOARD Supply & fixing 18 mm thick pre laminated particle board top (Make- Novapan, wintuff, Action Tessa)including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to . as in replacement of chiar school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as directed by Engineer-in-Charge. |
| 130 | All as per Ser item No. 129.00 here-in-before but of moulded one piece PVC back and seat , Make- Ballowal/ Blowplast |
| 131 | Preparation of old steel surface of chair school with hand board and applyingone coat of black Japan paint complete all as specified and shown on drawing |
| 132 | TABLE DINING4 PERS Supply & fixing in replacement of unsv top made out of 18/19mm thick prelaminated particleboard of teak shade,(Make- Novapan, wintuff, Action Tessa) 4mm Teak wood beading all round the top oftable dinning of size 1200mmx900mmx760mm with one coat french polish including dismantling of unsv components all as specified and shown on drg.(FD/MAP-II/04) |
| 133 | All as per Ser item No. 132.00 here-in-before but legs as per drg and directedby Engr-in-charge. |
| 134 | All as per Ser item No.132.00 here-in-before buttop front rail as per drg and directedby Engr-in-charge. |
| 135 | All as per Ser item No.132.00 here-in-before butside rail as per drg and directedby Engr-in-charge. |
| 136 | Supply and fix of sheesham wood triangular support with nails to strengthen table dinning. |
| 137 | M&L for Polishing on complete surface of table dinning for 4 person on wooden portion to direct vision after replacement of above parts/ components. |
| 138 | CUSHION & COVER FOR SOFA &COUCH Supply & fixing inreplacement of unsv foam cushion of sofa set of 4/5 seated and couch CB 550x525x100mm 40 density covered with tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.110/- meter.Make of foam Sleep well/cool foam/Feather foam FD-281, 373 & DB-4084, 3972 |
| 139 | Supply & fixing in replacement of unsv cover of foam cushion suitable for 550x525x 100mm thick cushion. Tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.110/- meter.FD-281, 373 & DB-4084, 3973 |
| 140 | Removing old cloth tapstray from cushion of sofa and re-fixing the same by stitching after washing with surf including ironing all as specified and directed by Engineer-in-charge. |
| 141 | CHAIR DINING CUSHIONED LONG BACK Supply and fixing in replacement of unserviceable Front leg of Chair Dining cushioned long back using 1st class seasoned hard wood sheesham including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge |
| 142 | All as per Ser item No. 141 here-in-before but Rear leg as per drg and directedby Engr-in-charge. |
| 143 | All as per Ser item No. 141 here-in-before but side rail as per drg and directedby Engr-in-charge. |
| 144 | All as per Ser item No. 141 here-in-before butstiffener "H" type as per drg and directedby Engr-in-charge. |
| 145 | All as per Ser item No. 141 here-in-before but Foam cushion 75 mm thick and 32 density of seat and back duly covered with tapestry cloth of approved quality. |
| 146 | Supply and fixing of sheesham wood triangular support with nails to strengthen Chair dinning cushioned long back. |
| 147 | Polishing to chair dining cushioned Long back with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and shown on drawing |
| 148 | Stool Dressing with cushion: Supply and fixing in replacement of UNSV Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality. |
| 149 | Supply and fixing in replacement of unserviceable leg, long/short rail of dressing stool with cushion using 1st class seasoned hard wood sheesham including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge |
| 150 | TABLE DRESSING GENTS MAP : FD/E6/MAP/16 Supply & fixing in replacement of unsv Side wall of table dressing gents,made out of 18mmthickprelaminated particle board exterior quality with PVC edging / teak woodall round the side wallof table dressingMAPincluding dismantling of unsv components all as specified shown on drg.(FD- FD/E6/MAP/16) and directed by Engr-in-charge |
| 151 | All as per Ser item No. 58 here-in-before but supply & fixing of thelooking mirror 5.5mm thick alongwith frame and supporting ply and 03 Nos 75mm long hinges complete with one coat fench polish on the frame including dismantling unserviceable components all asspecified and shown on drg.(FD/E6/MAP/16). All as per shown on drg and directed by Engineer -in - Charge.Make of mirror will beModiGuard/ Atul/ Swastic |
| 152 | All as per Ser item No. 58 here-in-before but S&F new rear wall of 12mm thick plywoodincluding2 Nos SS henging plate and polishingcomplete rest all as per Drg and directed by Engineer-in Charge. |
| 153 | All as per Ser item No. 58 here-in-before but S & Fof 03 Nos glass shelves of size 600mmx100mm,5.5mm thick complete as per drawing. |
| 154 | Bath Mat PVC (FD/E6/MAP/07) : Supply in replacement of UNSV Bath Mat PVC of size 400x300mm, rest all as shown on drg and directed by Engr-in-charge. Make :AMKO/Cello/Swastik |
| 155 | Table 900x900x760 with drawer/without drawer (FD-291) Supply & fixing of the following components/parts of table 900x900x760mm using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components . S & Ftop of table 900x900x760mm should be 18mmthickprelaminated particle board exterior quality teak shade one side, Make : Novapan, wintuff, Action Tessa including 4 mm thick Teak wood beading all round the top complete all as shown in drawing and directed by Engineer-in-Charge |
| 156 | All as per item No18.00 here in before but S&F of leg all as per shown on drg and directed by Engineer -in - Charge. |
| 157 | All as per item No.18.00 here in before but S&F oftop long rail all as per shown on drg and directed by Engineer -in - Charge. |
| 158 | All as per item No.18.00 here in before but S&F oftriangular support all as per directed by Engineer -in - Charge. |
| 159 | M& L for French polish to table 900x600x760mm wooden portion complete all as per shown on drg and directed by Engineer -in - Charge. |
| 160 | Sofa Set 5 Seater (FD-373) Supply & fixing of following components/parts of Sofa Set 5 Seater using 1st class seasoned hard wood Sheesham free from all knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed by Engr-in-Charge.(FD-376).S&F new Legs of SofaSet 5 Seater including one coat of the same part, Rest all as per shown on drg and directed by Engineer -in - Charge. |
| 161 | All as per ser item No 160.00 here in beforebut new long rail (front/rear) , restall as per shown on drg and directed by Engineer -in - Charge. |
| 162 | All as per ser item No 160.00 here in beforebut new Side rail, rest all as per shown on drg and directed by Engineer -in - Charge. |
| 163 | All as per ser item No 160.00 here in beforebut new arms, Rest all as per shown on drg and directed by Engineer -in - Charge. |
| 164 | All as per ser item No 160.00 here in beforebut new back top rail, restall as per shown on drg and directed by Engineer -in - Charge. |
| 165 | All as per ser item No 160.00 here in beforebut new Stiffener all as per shown on drg and directed by Engineer -in - Charge. |
| 166 | M& L for French polish to Sofa Set 5/4 Seateron wooden portion complete all as per shown on drg and directed by Engineer -in - Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
