Indo Tibetan Border Police Force-ITBP has published Tender For Water Supply System Installation & One Bore Well Up To 1000 Feet Depth With Submersible Motor Pump, Gi Pipes, Submersible Motor Cable, Starter Panel For 20 Nos Temp. Toilet At 42Nd Bn, Itbp, Jodhpur (Raj.). Submission Date for this Tender is 08-05-2023. Bore Well Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders. 300 mm dia |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 240 metre depth below ground level. Rocky strata including Boulders. 300 mm dia |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge 300 mm nominal size dia having minimum wall thickness 5.40 mm |
| 4 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia |
| 5 | Lowering of submersible motor pump, pipes with the help of chain pulley and fixing of repaired pump/ motor set as per requirement including replacement of nut & bolts of pipes, welding etc. complete. |
| 6 | Supplying & Laying of one number PVC insulated and PVC sheathed/ XLPE Aluminium conductor armoured electric cable 3.5 core 35 sqmm of following size direct in ground including excavation, sand cushinoing, protective covering and refilling the trench etc as required. (brand should be used (Havells/ Grandley/Plaza/Kalinga/National) |
| 7 | Supplying & Fixing of 40mm GI pipe with necessary fittings make of Jindal/Hisssar/Tata/T.T. Swastick |
| 8 | Supplying & Fixing of PVC insulated wire Three core 6mm cable for submersible pump makes kalinga/havells/finolex/Plaza/National |
| 9 | Providing & Installation of 10 HP Submersibile motor & Pump 450 Mtr. Head makes Texmo, Kirlosker, CRI. |
| 10 | Supplying & Fixing of 15 HP three phase submersible controllor relay range 9-14 (MU-G20W FASD with in- buit WLC) makes ISI. (brand should be used (Havells/ Grandley/Plaza/Kalinga /National/ Finolex / Wipro / Orient / Polycab/L&T)) |
| 11 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 12 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (Jaquar/Hindware/Prayag/Kohler/Cera/Parryware/ Johnson) |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore/ make of Jindal/Hisssar/Tata/T.T. Swastick |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore/ make of Jindal/Hisssar/Tata/T.T. Swastick |
| 15 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (Jaquar/Hindware/Prayag/Kohler/Cera/Parryware/ Johnson) |
| 16 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 17 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (Jaquar/Hindware/Prayag/Kohler/ Cera/Parryware/ Johnson) |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes/ make of Jindal/Hisssar/Tata/T.T. Swastick |
| 19 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 20 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required 200 mm dia |
| 21 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 22 | Hydro Geological survey before lowering of tubewell for availability of Ground water at source as per approved method. The contractor shall arrange all necessary equipments, machines tools and plants as per required for test. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
