Tender For Maintenance Work Of 16 Nos. Bsnl Gsm Towers Of Different Heights, Located At Different Places Under Priority I In Katol, Narkhed, Saoner And Butibori Sdca In Nagpur Ba.
Tender Value
4.58 Lakhs
Estimated cost
Bid Submission
13 May 2023
0 days left
EMD
9170
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
katol → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Work Of 16 Nos. Bsnl Gsm Towers Of Different Heights, Located At Different Places Under Priority I In Katol, Narkhed, Saoner And Butibori Sdca In Nagpur Ba.
BOQ
| Sl. No. | Item Description |
| 1 | Clearingjungleincludinguprootingof rank vegetation, grass, brushwood,trees and saplings of girth upto 30 cm measured at a heightof1mabove ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Providing and laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | (a) 1:2:4(1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Demolishing Cement Concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 5 | (a) Nominal Concrete 1:3:6 or Richer Mix (including equivalent Design Mix) |
| 6 | Demolishing Brick Work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 7 | (a) In Cement Mortar |
| 8 | Supplying at the site of work the Hot Dip Galvanised members for the missing members ,if any of Tower, Working Platform, Safety Cage, Ladder, Wave Guide Rack, Antennea Fixture etc. of required section, shape and size including Drilling Holes for fixing bolts etc. all in conformity with the approved drawings of BSNL and as per the directions of Engineer-in-charge and shall be made out of primary source ofstructural steel of approved make: viz. SAIL, TISCO, RINL etc. |
| 9 | NOTES: (a) All material shall be Hot Dip Galvanised. The fabrication & galvanising shall be as per the relevant IS code.(b)Weight of each member supplied shall be taken for payment purpose.(c)The Rate includes the cost of all material and labour required for all the operations mentiond in the item including all carriage, taxes and other contingencies. |
| 10 | Supplying at the site of work the HTGalvanisedSteelPlain Nuts, Check Nuts, Bolts, Plain & Spring Washers of grade 5.6 and as per IS- 12427 required size as per the structural drawingof the tower including threading the bolts for the required length all complete as directed by the Engineer-in-Charge. |
| 11 | Checking & Tightening of all Nuts & Bolts of all sizes with POWER TORQUE WRENCH by settingrequired torque to all components which includes Antenna fixtures, Carrier and Fastenings, Gantry, Cable Feeder Rack, Resting and Working Platforms alongwith Handrails,Wave Guide Rack,wave guide rack support, Ladders etc including fixing all missing galvanized structural members, bolts, nuts, plain washers and spring washers etc all complete as per approved drawing in all respect and asper the directions of Engineer- in-chargeThe item also includes providing and applying rust-removing solution or cutting the nuts / bolts where found necessary. |
| 12 | NOTE-I: Rate includes cost of all operations involved in tightining of nuts, hoisting and fixing of missing structural members,nuts and bolts,including hire charges of tools,plants and machineries, Binuculars for inspection, insurance premium of labours etc. and nothing extra shalll be paid on this account.The contractors has to supply Insurance Coverage Certificate of workers. Cost of Structural Members, Nuts, Bolts, Springs and Plain Wahers required at the missing points shall be paid for seperately. |
| 13 | NOTE-II: Where Tower maintaince workis to be carried out in habitant area,all necessary precautions shall be observed scrupulously so thatthere must not happen any mishap or else the agency shall be responsible solely for any type of damage to human, property, animals and Agriculture/trees in premises of working area. Tower tightening checking shall beexecutedin the presence of SDE/JTO ( Telecom) incharge of SDCA ) |
| 14 | NOTE-III: The Foundation Bolts & Nuts and Nuts & Bolts of Base Joints of Legs shall be enclosed by providing half brick masonry enclosure, filling sand, wrapping the nuts and bolts with polythene sheet and coveirng the entire enclosure with PCC and finishing the top surface with cement plaster etc. The payment of items of GROUTING shall be made in respective items separtely. |
| 15 | Pole Structure upto 6 M to 12 M Height RTT |
| 16 | Roof Top Tower above 21 MHeight |
| 17 | 40m High GBT Steel Tower of any Make, Shape and Weight. |
| 18 | 60m High GBT steel Tower of any Make, Shape and Weight. |
| 19 | 100m High GBT steel Tower of any Make, Shape and Weight. |
| 20 | Supplying skilled fitter / Blacksmith for cleaning /cutting / removing birds nests, bee hives, weeds, creepers etc. and cleaning of tower members to remove black spots, fungus by gentle rubbing using nylon brush, coir, cloth piece etc. and as directed by Engineer in charge. ( This item is not applicable where painting of tower is measured) |
| 21 | (a) 40/80 m USO/NBLW/NBFL Tower |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 23 | (A) Two or more coats on new work. |
| 24 | Supply / installation, Testing and commissioning of 230 V AC LED aviation obstruction lamp of approved quality with Light Dependent Resistance Sensor (Day-Night automatic timer) on the top of 40m/60M tower including making necessary arrangement for fixing with supply & fixing of base plate & required clamps, etc. as required as per the direction of the Engineer-in-charge. |
| 25 | Grouting the base plates ,legs, anchor bolts and nuts of four leged tower by enclosing the legs by half brick work in C.M. 1:4 ( 1 cement:4 Fine sand) on all the column upto 300 mm height applying grease to the nuts bolts to be embedded, covering the nuts bolts by polythene sheet ,filling the enclosure of brick work by sand laying cement concrete 1:2:4 ( 1 cement: 2 Coarse sand: 4 graded stone aggregate 20 mm nominal size) on the leg to proper slope and plastering with 12 mm cement plaster alround with C.M 1:6 all complete as per the direction of Engr-in-Charge etc. complete. |
AI Tender Summary
Tender Timeline
Apr 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender