SANTACRUZ ELECTRONIC EXPORT PROCESSING ZONES SPECIAL ECONOMIC ZONE MUMBAI has published Tender For Main Road Repairs And Rationalization In Sector Iv Located At Seepz Sez Andheri East Mumbai 400 096. Submission Date for this Tender is 09-05-2023. Road Repair Tenders in seepz Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Main Road Repairs and Rationalization in Sector-IV |
| 2 | DISMENTALING OF CONCRETE: Dismantling and removing lime or plain cement concrete including stacking the spoils as directed with all leads & lifts etc. complete as per direction of Engineer - in- charge. |
| 3 | REMOVING OF DAMAGED PAVER BLOCKS: Removing the paver blocks of any thickness, size & colour from carriage way or footpath without causing dust nuisance and stacking the debris upto a distance of 50 metres and cleaning the site etc. complete as per the direction of Consulting Engineer / in-charge. |
| 4 | REMOVAL OF THE DEBRIS: Lowering down the debris obtained from breaking and removing the cement plaster/waterproofing, RCC, etc. by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site and carting away the same outside the building compound upto the municipal dump with all lead and lift completeas per the direction of Consulting Engineer / in-charge complete. |
| 5 | EXPANSION JOINT FILLING: Resealing of joints of M-35& above C.C. old pavement with hot applied sealing compounds confirming to IS-1834-1984 including cutting & removing existing damaged sealing compound by raking tool or mechanical means & clearing of joints with compressed air, application of primer for receiving hot sealing compound & providing layer of lime powder over hot sealing compound etc. complete as directed. B) Resealing 11-15 mm wide transverse/longitudinal joints with average depth of 40mm. |
| 6 | KERB STONE WORK: Providing & Fixing kerb stones 30cm to 40cm long, 15cm wide, 38cm deep medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15cm thick and 25cm wide RMC M-20 C.C. bed including filling the joints with 1:2 C.M. pointing, curing etc. Complete. etc. complete as per direction of Engineer - in- charge. |
| 7 | RUBBLE SOLING: Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete as directed by Engineer-in-charge. |
| 8 | PCC ON DAMAGED PAVING AREA & DIVIDER: Providing & laying in position Ready Mix Cement Concrete for RCC work for beam column, slabs, pardis, road pavement, etc. using granite / black trap graded metal including mixing in plant, transporting in transit mixer, placing and compacting by mechanical means including steel or ply wood centring, form work for all elements, including all lifts & stationery pump for lifting concrete, all leads of concrete from RMC plant to site of work etc complete as directed by Engineer In-charge. |
| 9 | HEAVY DUTY PAVER BLOCKS: Providing and fixing in line & level paver blocks 80 mm thick (strength 45 M pa) on sand bed 40 mm thick. The paver blocks shall confirm to BS 6717 ASTM C 936- 96 including providing and preparing sand beds as specified, fixing blocks in position at site, filling the joints by jointing sand, compacting the blocks by plate vibrator including filling the side joints by m-20 grade cement concrete if required etc.as directed by Engineer In-charge. |
| 10 | MS GRILL COVER TOP ON CHAMBERS: Providing and Fixing MS Safety grill ofweighing 20 to 25 kg / sqm for windows/Openings as per design including fabricating the grill made out of 50 x 6 mm flats, duly welded with MS flat / square bars in horizontal direction at 100 mm c/c including 50 x 6 mm MS flats / square bars, if required limiting span of horizontal MS Bars to 1.00 m to less than 1.00 m., with two coats of synthetic enamel painting etc. complete. Etc complete as directed. |
| 11 | REPAIRING OF CHEMBERS: Repairing of existing rectangular chambers of various sizes with required brickwork, plastering, etc. including Removing C.I. cover with frame manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead and Refixing C. I. frame and cover (any size or shape) in C. S. (1 : 2) & Sand filleting, etc. complete as instructed by Engineer incharge. |
| 12 | LACKER FINISH ON PAVER BLOCKS: Providing lacker finish coating by brush or spray in approved colour over paver blocks including preparation of surfaces washing by jet wash, protecting, resurfacing with bedding, cleaning the substrate of all laitance, construction dust, contaminants etc. all complete as per the direction of Consulting Engineer / in-charge. |
| 13 | REMOVING OF OLD PAINT: Removing and scrapping oil paint from wood work, ironwork, including knotting, scrapping, rubbing down, including sand papering sealing the cracks with putty, filling with enamel putty, flattening, rubbing and making the surface smooth to receive the paint etc.as directed by Engineer In-charge. |
| 14 | KERB STONE PAINTING: Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior acrylic based exterior paint with silicone additives of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. |
| 15 | PAINTING LANE MARKING STRIPS & ZEBRA CROSSING STRIPS: Providing and painting lane marking strips &zebra crossing strips with Oil Based white colour road marking paint as per the dimension given, including cleaning of asphalt surface (where road marking paint is to be applied) etc complete as per the direction of Engineer in charge |
| 16 | ROAD STUDS: Supplying and fixing of Plastic body studs with two shanks and without shanks of SWAREFLEX or equivalent in yellow, red and white colour made of ABS body with size 100 X 100 X 17.9mm, having reflective panels of 34 special Swaro glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity. Having reflective panels in yellow, red and white plastic with yellow, red, white or green Swaro glass elements. The studs shall have a compressive strength test certificate of 25 tons in accordance with ASTDM D 4280 and successfully passing retro reflectivity test as per EN 1463-1 and the road test EN 1463-2 from a reputed laboratory. The fixing of the road studs shall be done by using a recommended Two Component Epoxy. In addition, two holes should be drilled in the depth of 50 mm on the road for the version with two shanks etc. complete as directed by Engineer In-charge. |
| 17 | INFORMATORY SIGN BOARDS: Providing and fixing informatory sign boards in square or rectangular shape of any size made out of 12 gauge (3 mm) thick Aluminium sheet bounded with green reflective sheeting of high intensity grade having pressure sensitive / heat activated adhesive white retro reflective cut out border with message having pressure sensitive screen printing of green transparent colour over white retro reflective sheeting having border and message in white back ground including M.S. angle iron frame of size 35 x 35 x 3 mm and two M.S. angle iron post of size 65 x 65 x 6 mm, 3.65 m long properly cross based with angle iron of size 50 x 50 x 5 mm duly painted with one coat of epoxy finish paint having alternate black and white bands of 25 cm width including G. I. fixtures etc.as directed by Engineer In-charge. |
| 18 | GROUTING FOR ASPHALT ROADS: Providing 75 mm thick full grout treatment over existing asphalt road including picking old asphalt road surface, supply of metal, asphalt, grit with necessary spreading of metal, rolling over metal, heating & spreading of asphalt, grit, rolling the final surface etc complete. |
| 19 | LEAN MIX BM (LBM) FOR ASPHALT ROADS: Providing and laying Lean Mix BM (LBM) using VG 30 grade asphalt for filling pot- holes and improvementofexisting roadsurface whereverrequiredincluding material, heating asphalt, premixing itwith stone metal inhotmix paver transporting and laying, rolling and finishing etc. complete using metal grading as per Table No. 500-4 ofspecification ofroad &bridges publishedby IRC etc. complete. (using asphalt@ 3.5% by weight of mix excluding tank coat etc.as directed by Engineer In-charge. |
| 20 | TACK COAT FOR ASPHALT ROADS: Providing and spraying bituminous tack coat complete with all leads and lifts for materials as per technical specifications, surface cleaned with mechanical broom & asphalt/emulsion spread with bitumen pressure distributor. A)By using Penetration grade bitumen conforming to IS-73-1992 (grade VG 10) B)5 Kg/10 Sq. M. over bituminous surface etc.as directed by |
| 21 | DENSE MACADAM FOR ASPHALT ROADS: Providing and laying premixed DENSE bituminous macadam usingVG 30 grade bitumen including all materials, heating bitumen, premixing it with stone metal, in a hot mix plant, transporting to the site of work, laying the mix with a Hydrostatic paver with sensor control and compacting with smooth wheeled tandem vibratory roller including initial cleaning of surface, tack coat using VG 10 grade bitumen @ 0.25kg/sq. m.or RS-1grade bituminous emulsion etc. complete (Lead up to 100 km from Refineries for bulk bitumen & nearest rail head for bitumen in drums). (Min. Bitumen content@ 4.5% by weight of total mix) etc.as directed by Engineer In-charge. A) Tack coat in VG-10 a)50 mm compacted thick with heating aggregate. |
| 22 | HOT MIX FOR ASPHALT ROADS: Providing and laying hot mix, hot laid premixed bituminous concrete using 60 / 70 grade asphalt/ CRMB/PMB including all materials, heating aggregate, asphalt etc. and mixing in hot mix plant, transporting laying with hydrostatic paver, finished with sensor control compacting and rolling with smooth wheeled tandem vibratory roller. Asphalt to be used at 6.25% by weight of total mix (machine laid only) (Inclusive of tack coat) etc.as directed by Engineer In-charge. A) Using 60/70 grade Asphalt a) 25 mm thick (for wearing course) |
| 23 | G.I. CHAIN LINK MESH FENCING: - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm etc.as directed by Engineer In-charge. |
| 24 | KERB STONE WITH LED LIGHTING SYSTEM: - Providing and fixing kerb stone with led lighting system as per following specifications: dimensions with vertical mounting legs with 10mm horizontal square shape mild steel reinforcements. Illuminated kerbstone having visible dimensions: -500mm x 150mm x 150mm. (as per irc-86 1983) 80mm legs having MS reinforcements shall be embedded in bt/ concrete road surface. the kerb stone should have kerb angle of 45 degree, with rubber plugs at both end of the kerbstone (2nos) having load carrying capacity-vertical: 1465kg, horizontal:2349 (certified by govt. Recognized bodies) having thermal stability-: -40 to+ 120-degree Celsius (certified by govt. Recognized bodies. Illuminated kerbstones including: in grace protection and connector rating IP 67, electrical wire-(as per is:694), led strip (as per lm:80) standard. Including for electrical fixing-FRP junction box consisting of-10 amp. Switch module power supply(smps) having input voltage-230 v ac, output voltage 36 vdc, 2 polemcb. Illuminated kerbstones having warranty for 3 years. illuminated kerb stone shall be fixed in to cast-in-situ cement concrete of m 20 grade at base, backfilling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc. Complete. The colour of kerbstone shall be provided as directed by engineer in charge. |
| 25 | CURVED LED ILLUMINATED INFORMATARY SIGNAL: - Providing and fixing new curved LED illuminated informatory signs for proper indications within premises including necessary fixtures etc. complete as per direction of project incharge. |
| 26 | PROVIDING NEW FLOWER POTS FOR ROAD DIVIDER: - Providing New Flower bed replacing old damaged Flower pots of requires size and shapes with proper confirmation and sanctioning including transporting, placing etc.as directed by Engineer In-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
