|
| 1 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified anddirected. |
| 2 | All as per item No. 1.00 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified and directed. |
| 3 | Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 4 | Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 5 | PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole,stay assembly, repairs to road cutting etc complete all as specified and directed. |
| 6 | PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed |
| 7 | Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and kepping aside for refixing or carrying to store for credit |
| 8 | Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 8.5 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided withtwo coats of aluminium paint overone coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. |
| 9 | M&L for steel tubular swaged pole complete with cast ironbase plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 Mtr long). |
| 10 | S&F 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathedin service connectionsincl dismentling taking down unserviceable one all as specified and directed. |
| 11 | S&F 1100 volts grade heavy dutyflat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathedin service connectionsincl dismentling taking down unserviceable one all as specified and directed. |
| 12 | M&L for painting of Street light steel tubularpole with one coat of alumium paint incl bracket and clamps from above copping to top of pole with synthetic enamelled paint all as specified and directed. |
| 13 | Dismentling taking down carefully flood/street/gate light fitting any type any make any capacity from pole, gate pillar or wall complete all as specified and directed. |
| 14 | S&F LED Street light fitting 25 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make - CG/Havells/Philips |
| 15 | S&F LED Street light fitting 45 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make - CG/Havells/Philips |
| 16 | S&F LED Street light fitting 60 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver. Make - CG/Havells/Philips |
| 17 | S&F energy saviing environmental friendly, long life exclusive innovative die-cast aluminium IP-66LED flood light of 60 Watt 5700Kwith high power LED as light source source complete all as specified and directed. Make - CG/Havells/Philips |
| 18 | S&F energy saviing environmental friendly, long life exclusive innovative die-cast aluminium IP-66LED flood light of 180 Watt 5700Kwith high power LED as light source source complete all as specified and directed. CG/Havells/Philips |
| 19 | S&F energy saving environmental friendly, long life exclusive innovative die-cast aluminium IP-66LED flood light of 200 Watt 5700Kwith high power LED as light source source complete all as specified and directed. Make - CG/Havells/Philips |
| 20 | S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distributio, die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 40 Watt, 6500K complete all as specified and as directed by Engr-in-charge. MakeHavells / Philips/ CG |
| 21 | S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distributio, die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 20 Watt, 6500K complete all as specified and as directed by Engr-in-charge. MakeHavells / Philips/ CG |
| 22 | S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB(b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly weldedwith nuts & bolts incl dismentling taking down unsv complete all as specified and directed. |
| 23 | Supply and installation, testing and commissioning Time switches 415V three phase astronomical type with contactor and MCBTPN fitted inside steel enclosure with locking arrangement fixed on Pole/ LT Panel Board complete all as specified and directed. |
| 24 | Supply only distilled water |
| 25 | S&F for replacement of battary 12 V Low maintenance lead acidsuitable forsolar street light having minimum backup of 3 daysMake : Exide/Amaron or equivalent of approved make. |
| 26 | S&F LED Street Light fitting 20 Watt suitable for existing solar street light pole incl dismentling taking down unsv complete all as specified and directed. |
| 27 | S&F Solar Module panel made out ofhigh efficient mono/multi crystalline silicon cells solar panels suitable for 20 LED lamp of 2100 Lumen (each) light output Independent stand alone solar street lighting system power by 100 WP of solar array incl dismentling taking down unsv complete all as specified and directed. |
| 28 | Supply, laying & testing in repalcement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 16 sqmm 4 core including taking down of old unserviceable UG cable/service wires.Make :- Havells/KEI/Polycab |
| 29 | Description all as per item No 28 above but of size 16 Sqmm 2 core |
| 30 | S&F inreplacement of multistranded copper conductor PVC insulated sheathed of size 2.5 Sqmm 3 core for replacement from junction boc to security light all as specified & directed. |
| 31 | Supply and laying galvanised tube light gradeISI marked of size 40 mm dia incl all fittingsin trenches/fixed on pole/wall/floor or laid in positioncomplete all as specified and directed. |
| 32 | S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded andcover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 300x200x105mm,fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over ared oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also includes cost for material & repalcement of 4 sqmm multistranded twincore aluminium cable ISI marked from overhead conductor to junction box and replacement of 3 core copper cable of 1.5 Sqmm ISI marked from junction box to security light length as per required at site. Make- Sintex/Supreme/Hensal |
| 33 | S & F in replacement of GI brackets for fixing LED street light fitting fabricated out of GI tubing 40 mm dia, medium grade,1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed. |
| 34 | M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35/45 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh copper connectos all as specified and directed. Make :- Havells/Bajaj/Philips |
| 35 | Description all as per item No 34 above but of size 60 Watt |
| 36 | Description all as per item No 34 above but of size 90 Watt |
| 37 | M&L for replacement of new generation energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 70 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh copper connectos all as specified and directed. Make :- Havells/Bajaj/Philips |
| 38 | S&F in replacement of battery 12 volt lead acid suitable for solar street light having capacity 150 AH including all fitting arrangements all as specified & directed. Make:- Exide/Amaron/Luminous |
| 39 | M&L for structural MS frame work half round or other stock section including securing posts and stuts in fencing, frame work for gates of substations, base frame for equipments including securing bolts, posts and sturts in fencing including cutting and makeing shapes as desired, drilling holes, notching for wire cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bendingcold or hot drilling holes for bolts in any shapeetc flat iron fillets (for securing wire mesh etc)all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 including onecoat of primer and two coats of synthetic enamel paint to the entire steel surfaces all as specified and directed. |
| 40 | M&L for chain link MS galvanised fencing including lines wires, dia of chain link n less than 3.5 mm any mesh any size any type to any type strands rails, straining bolts etc. |
| 41 | S&F mild steel screw bolt (mechine made) with hexagonal or square, head, n.exc 5 cm but n.ecx 10 cm dia. |
| 42 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as directed. |
| 43 | S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed.Note -Each line of horizontal/vertical/diagonal wire to be measured for purpose of payment. |
| 44 | M&L MS angles as fencing port, struct cutting tops in shape incl all necessary drilling, notching and reveting etc and similar work confirming fe 310-0 pr fe 4120-0 all as specified and directed. |
| 45 | Supply & fixing of single phase automatic street light switch using integrated sensor based NATURE SWITCH for automatic switching of street lights based on LUX level of natural light required illuminance for switching on is ‹ 30 Lux and for switching OFF › 10 Lux level. The sensor (nature switch) along with suitable power contactors input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof , termite proof and FR graded SMC junction box conforming of IP 54 degree of ingress single phase 8KW lightning load capacity including mounting bracket , cable glands, front openable doors fitted with hinges & locking arrangment complete all as specified and directed. The contactor MCB and circuit wiring should suitable enough to take load of 8 KW equally distributed over three phase and street light timer should be comprising of following:-(a). Input MCB rating 63 Amps (b).Contactor MCBrating 63 Amps(c).Out put MCBrating 63 Amps(d).Single phase circuit wiring minimum 16 Sqmm multistranded copper wire. (e)Model No :- SWADEEP -02EC5 KW1P. Make :- Kakatiya Energy Systems Ltd |
| 46 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particalsin trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shallbe measured 18 cm after punning. |
| 47 | Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection , laid flatie length of cable cover shall be laid across the cable, complete casted with PCC 1:2:4 Type B1 using 20mm graded crushed stone aggregateall as specified and directed |
| 48 | M & L for road cutting incl necessary excavation 45 cm wide and90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable throughpipeafter laying /through the cable trenches will be fillingtop withM&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbedsurface etc complete all as specified and directed. |
| 49 | S&F in replacement of LED street light used in solar street light operated DC 12 volt of capacity 25 Wattincluding all fitting arrangements all as specified & directed. Make:- Havells/Surya/TATA |
| 50 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
