|
| 1 | Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated & depositing the surplus earth in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and levelling the site etc. complete complying with standard specification. |
| 2 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 3 | Brick work in CM 1:5 (one cement & five sand) using Fly Ash bricks of size 230x110x70mm including cost and conveyance of all materials ,and labour charges for mixing the mortar ,constructing ,curing to requried period and wherever the masonry projection is neccasary for elevation shall be done with out extra cost etc ,complete complying with standard specification. |
| 4 | Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. |
| 5 | Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29m high for plane surfaces such as RCC Slabs,Rectangular beams,Tee (or) ELL beams,Lintels,bed block,slabs,landing beam,canopy side slab,or boxing (or)vertical slabs,rectangular (or) quare(or)round columnsetc.,as detailed below with all cross bracings using M.S Sheets of size 90cmx60cm and B.G 10 Stiffended with welded M.S.Angles of size25mmx25x3mm for boarding laid over silver oak(or)country wood joist of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13 cm dia spaced out 75 cm centre to centre or at suitable intervals etc.,complete complying with std.specification |
| 6 | Supplying and erecting, centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheet of 90cm x60cm BG 10 gauge stiffened with welded M.S. angle of 25 x 25 x 3mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at not less than 75 cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. |
| 7 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3. |
| 8 | Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 9 | Collection supply and filling of well gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 10 | Supply,delivery and fixing of MS pipes for column and purlins size of 145mmx82mm and 80mmx40mm with base plate and bolt nuts including all cost of materials and labours etc.., complete |
| 11 | Purlins |
| 12 | MS circular standing pipe |
| 13 | Roofing with G.I Sheet 30Cm wide and 1.6mm thick including all cost and conveyance of all materials and all labour charges etc., Complete. |
| 14 | Supplying and fixing Alcopanneling wih diffrent colors and arrangements of approved design and as directed by the departmental officers including cost of materials , conveyance, labour charges and cost ofetc. complete complying with standard specifiction. |
| 15 | Supplying and fixing Stainless steel chairs and barrigading arrangements of approved design and as directed by the departmental officers including cost of stainless steel,fabrication , conveyance, labour charges and cost ofetc. complete complying with standard specifiction. |
| 16 | Hand rail |
| 17 | SS Chair |
| 18 | Supplying and paving with cement based hydraulically pressed anti-skid flooring tiles with pattern design of size 300 x 300 x 20mm of approved quality and colour set in cement mortar 1:3 (one cement and three sand) 20mm thick and pointing with white cement mixed with colouring pigments to full depth of tiles including perfectly and neatly finished in all floors.The rate shall be inclusive of cost of tiles, taxes, incidental charges, transportation charges and labour charges for fixing the tiles, neat finishing the joints, curing, as directed by the departmental officers etc., complete complying with standard specification.The tiles should be got approved by the departmental officers before useon works. |
| 19 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 20 | Supply and fixing of 18W 4 Feet LED Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting . |
| 21 | Supplying and fixing of LED light 24 Watts and 12 Watts of indoor Panel light with IP 20 Rating, Body: Aluminium Presure Die Casting, Out put Lumens : 1260 Lm, Colour Temperature : 6000K, with High Quality LED\"s and White diffuser and Driver with low power factor and with efficiency 0.9, Voltage Regulation : 185-295 V Input rotection and with Constant Current and Voltage Output, etc., and as specified by Depyt., Officer. |
| 22 | Supplying and fixing digital name board 1\"x1\" 18gauge squre pipe 1400 \" and 3\"x1\" ms tube and sheet , bolt,nut,keel,pipe ,painting ,arrangements of approved design and as directed by the departmental officers including cost of flx,and steel fabrication , Erection charge conveyance, labour charges and cost ofetc. complete complying with standard specifiction. |
| 23 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD-65 |
| 24 | Supply delivery and fixing of GI box of size 0.45mx0.25xx0.40m using 22 gauge GI sheet with locking arrangements including all cost of materials labour etc,.complete |