Tender For System Augmentation, Renovation, Modernisation And Strengthening Of Power Distribution Network Of Areas Under Gyalshing, Soreng, Namchi And Jorethang
Tender Value
48.47 Crore
Estimated cost
Bid Submission
17 May 2023
0 days left
EMD
1.21 Crore
Bank guarantee accepted
Document Fee
2 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gyalshing → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For System Augmentation, Renovation, Modernisation And Strengthening Of Power Distribution Network Of Areas Under Gyalshing, Soreng, Namchi And Jorethang
BOQ
| Sl. No. | Item Description |
| 1 | JORETHANG DIVISION - 66/11 KV SUB-STATION - ADDITIONAL EQUIPMENTS |
| 2 | 72.5 KV, 3 core current transformer having ratio 400-300-200/1 + 1+1 and of accuracy class and burden of 30 VA with first tilling of oil and complete with terminal connectors. |
| 3 | 72.5 kV 800 amps rated current 12.5 kA short time rating, triple pole, gang operated outdoor type with motor operated mechanism, terminal connectors, earthing connector with earthing blades. |
| 4 | 60 kV Lightning arrestor complete with insulating base and surge monitors & connector terminals connection. |
| 5 | Smoke detection system with all accessories and fittings |
| 6 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm |
| 7 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm |
| 8 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm |
| 9 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm |
| 10 | 11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm |
| 11 | HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm |
| 12 | 11 KV 3 core XLPE cable for outgoing feeders3 X 95 sqmm |
| 13 | 11 KV 3 core XLPE cable for outgoing feeders3 X 120 sqmm |
| 14 | Heat shrinkable outdoor type end termination kit for 11 kVXLPE cable 3 C x 120 sqmm |
| 15 | Heat shrinkable outdoor type end termination kit for 11 kVXLPE cable 3 C x 095 sqmm |
| 16 | Heat shrinkable indoor type end termination kit for 11 kVXLPE cable 3 C x 120 sqmm |
| 17 | Heat shrinkable indoor type end termination kit for 11 kVXLPE cable 3 C x 95 sqmm |
| 18 | 40 mm MS rod for main earth mat |
| 19 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 20 | 50x6 mm G.I flats for risers for all other equipments etc . |
| 21 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 22 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 23 | 80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound. |
| 24 | Transformer Oil 50KV grade Conforming to IS: 335/93 |
| 25 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 26 | 12 mtrs long Mast Lightwith 6 wayLED flood light including automatic control panel, complete set. |
| 27 | 52 Kg Gas cylinder |
| 28 | Laying of hand packed stone in switchyard and other civil repair works |
| 29 | JORETHANG DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION |
| 30 | 11 KV, 800 Amp indoor VCB Panels- Incomer |
| 31 | 11 KV, 800 Amp indoor VCB Panels- Bus Coupler |
| 32 | 11 KV, 800 Amp indoor VCB Panels- Outgoing Feeders |
| 33 | 11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm |
| 34 | Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 35 | Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 36 | Drytype maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required. |
| 37 | Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation. |
| 38 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 39 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming andrequired MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 40 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm |
| 41 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm |
| 42 | Fire extinguisher 4.5 Kg DCP Type |
| 43 | Fire extinguisher 4.5 Kg CO2 Type |
| 44 | Fire extinguisher 22.5 Kg CO2 type |
| 45 | 12 Fire buckets with stand |
| 46 | M.S angle 50mmx50mmx6mm |
| 47 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 48 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 49 | Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room |
| 50 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 51 | Civil and other associated repair works |
| 52 | JORETHANG DIVISION - REPLACEMENT OF 11 KV LINE ON 11 MTR. LONG LATTICED STRUCTURE WITH ACSR RABBIT CONDUCTOR |
| 53 | 11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable including all nuts & bolts complete without arms. |
| 54 | 11 kV Disc Insulator 70 KN, B&S / TC Type |
| 55 | Hardware Fittings for disc insulator suitable for RABBIT conductor |
| 56 | 11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent ) |
| 57 | Rabbit Conductor 50 sqm |
| 58 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 59 | PG Clamp for Rabbit Conductor |
| 60 | Compression Joint for ACSR Rabbit conductor |
| 61 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 62 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 63 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 64 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 65 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 66 | Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 67 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 68 | Red oxide paint |
| 69 | Aluminium paint |
| 70 | G.I. Barbed Wire |
| 71 | 11 kV Caution Board |
| 72 | Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix. |
| 73 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 74 | JORETHANG DIVISION - REPLACEMENT OF 11 KV LINE ON 9 MTR. LONG LATTICED STRUCTURE WITH ACSR WEASEL CONDUCTOR |
| 75 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 76 | 11 kV Disc Insulator 70 KN, B&S / TC Type |
| 77 | Hardware Fittings for disc insulator suitable for WEASEL conductor |
| 78 | 11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent ) |
| 79 | WEASEL Conductor 50 sqm |
| 80 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 81 | PG Clamp for WEASEL Conductor |
| 82 | Compression Joint for ACSR WEASEL conductor |
| 83 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 84 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 85 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 86 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 87 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 88 | Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 89 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 90 | Red oxide paint @ 2 ltr/ pole |
| 91 | Aluminium paint @ 1.5 ltr / pole |
| 92 | G.I. Barbed Wire |
| 93 | 11 kV Caution Board |
| 94 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 95 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 96 | JORETHANG DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM,XLPE ARMOURED CABLE |
| 97 | 3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II |
| 98 | 110 mm dia. (95/70/50/35 sq.mm)Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex) |
| 99 | G.I Pipe 6\" Heavy Duty |
| 100 | G.I Pipe 4\" Heavy Duty |
| 101 | Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm |
| 102 | Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm |
| 103 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 104 | CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR |
| 105 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 106 | Covered conductor 50 Sq. mm. |
| 107 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 108 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 109 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 110 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 111 | Insulating Piercing Connector |
| 112 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 113 | 11 KV Termination Kit for Covered Conductor |
| 114 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 115 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 116 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 117 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 118 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 119 | Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 120 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 121 | Red oxide paint @ 2 ltr/ pole |
| 122 | Aluminium paint @ 1.5 ltr / pole |
| 123 | G.I. Barbed Wire |
| 124 | 11 kV Caution Board |
| 125 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 126 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 127 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 128 | JORETHANG DIVISION - 500 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 129 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.500 KVA, 11/0.43KV Copper Wound |
| 130 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 1000 A INCOMING:1 No. 1000 A, 4P,50KA, MDO ACB.OUTGOING: 1 No. 400 A TP MCCB, 50 KA, 3 No.200A TP MCCB, 50 KA& 1 No. 63A TP MCCB, 35 KAall with built in Thermo Magnetic Release. |
| 131 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 132 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 133 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 134 | Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362 |
| 135 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 136 | M.S.channelISLC75 (75X40X6mm) |
| 137 | M.S.channelISLC75 (75X40X6mm) |
| 138 | Back clamps of 75X8mm Flat |
| 139 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 140 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 141 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 142 | Red Oxide Metal Primer conforming to IS: 2074 |
| 143 | Aluminium paint |
| 144 | Danger Board 11000Volts |
| 145 | Danger Board 440Volts |
| 146 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 147 | Placement of 500 KVA distribution Transformer on parapet of size 1.5x1.5x1mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 148 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 149 | Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA. |
| 150 | JORETHANG DIVISION - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 151 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.- 100 KVA, 11/ 0.433 KV, Copper Wound |
| 152 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING:1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 153 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 154 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 155 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 156 | Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm |
| 157 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 158 | M.S.channelISLC75 (75X40X6mm) |
| 159 | M.S.channelISLC75 (75X40X6mm) |
| 160 | Back clamps of 75X8mm Flat |
| 161 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 162 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 163 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 164 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 165 | Aluminium paint @ 1.0 ltr / pole |
| 166 | Danger Board 11000Volts |
| 167 | Danger Board 440Volts |
| 168 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 169 | Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 170 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 171 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 172 | JORETHANG DIVISION - 63 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 173 | 50 HZ, ONAN COOLED, OUTDOOR/INDOOR TYPE DISTRIBUTION TRANSFORMER PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS: 1180(PART-I)2014:ENERGY EFFICIENCY LEVEL 2 - 63 KVA, 11/ 0.433 KV, Dyn 11, Aluminum Wound (3 phase) |
| 174 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 100 A INCOMING:1 No. 100 A, 4P,50KA, MCCBOUTGOING: 3 Nos. 63A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 175 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 176 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 177 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 178 | Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm |
| 179 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 180 | M.S.channelISLC75 (75X40X6mm) |
| 181 | M.S.channelISLC75 (75X40X6mm) |
| 182 | Back clamps of 75X8mm Flat |
| 183 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 184 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 185 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 186 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 187 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 188 | Aluminium paint @ 1.0 ltr / pole |
| 189 | Danger Board 11000Volts |
| 190 | Danger Board 440Volts |
| 191 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 192 | Placement ofDistribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 193 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 194 | Fencing for 10/16/25/63 KVA pole mounted distribution sub-station of size 2x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per layout No. 1/F/E&PD/10-63 KVA. |
| 195 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 196 | JORETHANG DIVISION - INSTALLATION OF NEW 250 KVA 11/0.43 kV PACKAGED SUB-STATION |
| 197 | PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 250 KVA Oil cooled transformer(Al) |
| 198 | Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 199 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 200 | JORETHANG DIVISION - NEW 3 PHASE 5 WIRE OVERHEAD LT LINE ON AAC GNAT CONDUCTOR |
| 201 | 8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts. |
| 202 | LT shackle insulator 3\"x3 1/2\". |
| 203 | D\" clamp complete with pin, washers, nuts & bolts. |
| 204 | Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long withbow thimble, turn buckle and 150x150x6mm anchor plate. |
| 205 | AAC GNATconductor 50 sq.mm. |
| 206 | No. 12 SWG G.Iwire for continuous earth wire |
| 207 | Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 208 | Danger Board 440 Volts. |
| 209 | Painting of poles with Red Oxide paint @1.5 Ltr./pole. |
| 210 | Painting of poles with Aluminium paint @1 Ltr./pole. |
| 211 | G.I Barbed wire @ 2Kg/pole. |
| 212 | Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix. |
| 213 | Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit. |
| 214 | JORETHANG DIVISION - NEW 1 PHASE 2 WIRE OVERHEAD LT LINE ON AAC GNAT CONDUCTOR |
| 215 | 8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts. |
| 216 | LT shackle insulator 3\"x3 1/2\". |
| 217 | D\" clamp complete with pin, washers, nuts & bolts. |
| 218 | Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long withbow thimble, turn buckle and 150x150x6mm anchor plate. |
| 219 | AAC GNATconductor 30 sq.mm. |
| 220 | Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 221 | Danger Board 440 Volts. |
| 222 | Painting of poles with Red Oxide paint @1.5 Ltr./pole. |
| 223 | Painting of poles with Aluminium paint @1 Ltr./pole. |
| 224 | G.I Barbed wire @ 2Kg/pole. |
| 225 | Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix. |
| 226 | Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit. |
| 227 | JORETHANG DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder |
| 228 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm |
| 229 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 230 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm |
| 231 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 232 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 233 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 234 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 235 | Aluminum thimblering 185sqmm |
| 236 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 237 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 238 | JORETHANG DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder |
| 239 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm |
| 240 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 241 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm |
| 242 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 243 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 244 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 245 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 246 | Aluminum thimblering120 sqmm |
| 247 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 248 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 249 | JORETHANG DIVISION - 4 x 16 sq.mmNew LT Underground Feeder |
| 250 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 251 | Aluminum thimblering 16sqmm |
| 252 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 253 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 254 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 255 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 256 | JORETHANG DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION |
| 257 | 2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 258 | 2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 259 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 260 | Aluminum thimblering10 & 16sqmm |
| 261 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 262 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 263 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 264 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 265 | JORETHANG DIVISION -3x50+1x35+1x16 sq.mm, LT Aerial Bunched Cables |
| 266 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 267 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 268 | 3 x 50 sq.mm + 1 x 16 sq.mm + 1 x 35 sq.mm, 1.1 KV with aluminum alloy bare messenger wire |
| 269 | LT A.B Cable tension clamps (Galvanized) |
| 270 | LT A B cable Suspension clamps (Galvanized) |
| 271 | Clamps for neutral for AB Cable |
| 272 | LT Dead End Clamp for L.T.A.B Cable |
| 273 | Service Rings half round |
| 274 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 275 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 276 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 277 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 278 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 279 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 280 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 281 | Anti-Climbing Device (Barbed Wire) |
| 282 | 11 KV Caution Board |
| 283 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 284 | Aluminium paint @ 1.0 ltr / pole |
| 285 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 286 | Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 287 | JORETHANG DIVISION -LED STREET-LIGHTING SYSTEM |
| 288 | LED Street light 45 Watt |
| 289 | 1.0 sqmm. ISI markedFRLSH PVCinsulated Single coreindustrial multistrand copper conductorvoltage grade upto 1100 V. |
| 290 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED4 Core x 16 sqmm |
| 291 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 292 | Polycarbonate junction box with bus bar arrangement & 6 Amp MCB |
| 293 | Red oxide paint. |
| 294 | Al.paint. |
| 295 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound. |
| 296 | G.I Earth Spikeconforming to IS 227. |
| 297 | G.I.street light bracket |
| 298 | 8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs |
| 299 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 300 | Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54\"x2\"x2\"depth earth pit and plastered parapet |
| 301 | NAMCHI DIVISION - 66/11 KV SUB-STATION - ADDITIONAL EQUIPMENTS |
| 302 | 72.5 KV, 3 core current transformer having ratio 400-300-200/1 + 1+1 and of accuracy class and burden of 30 VA with first tilling of oil and complete with terminal connectors. |
| 303 | 72.5 kV 800 amps rated current 12.5 kA short time rating, triple pole, gang operated outdoor type with motor operated mechanism, terminal connectors, earthing connector with earthing blades. |
| 304 | Smoke detection system with all accessories and fittings |
| 305 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm |
| 306 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm |
| 307 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm |
| 308 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm |
| 309 | 11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm |
| 310 | HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm |
| 311 | 11 KV 3 core XLPE cable for outgoing feeders3 X 95 sqmm |
| 312 | 11 KV 3 core XLPE cable for outgoing feeders3 X 120 sqmm |
| 313 | Heat shrinkable outdoor type end termination kit for 11 kVXLPE cable 3 C x 120 sqmm |
| 314 | Heat shrinkable outdoor type end termination kit for 11 kVXLPE cable 3 C x 095 sqmm |
| 315 | Heat shrinkable indoor type end termination kit for 11 kVXLPE cable 3 C x 120 sqmm |
| 316 | Heat shrinkable indoor type end termination kit for 11 kVXLPE cable 3 C x 95 sqmm |
| 317 | 40 mm MS rod for main earth mat |
| 318 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 319 | 50x6 mm G.I flats for risers for all other equipments etc . |
| 320 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 321 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 322 | 80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound. |
| 323 | Transformer Oil 50KV grade Conforming to IS: 335/93 |
| 324 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 325 | 52 Kg Gas cylinder |
| 326 | Laying of hand packed stone in switchyard and other civil repair works |
| 327 | NAMCHI DIVISION - NEW 11/ 11 KV SWITCHING STATION |
| 328 | 11 KV, 800 Amp indoor VCB Panels- Incomer |
| 329 | 11 KV, 800 Amp indoor VCB Panels- Bus Coupler |
| 330 | 11 KV, 800 Amp indoor VCB Panels- Outgoing Feeders |
| 331 | 200 KVA, 11/0.433 KV , 3-phase (outdoor type) with first filling of oil with off load tapping +2.5 %, + 5% with copper winding. |
| 332 | Fencing for 200KVA parapet mounted distribution substation of size 3x3 mtrs. constructed with 50x50x5mm MS angle vertical props, 35x35x6mm MS angle supports (double run), G.I. wire mesh, 50x6mm MS Flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc. |
| 333 | L.T. distribution Switch Board, outdoortype kiosk , 400 Amp, having electrolytic annealed copper bus bar 50x12 mm for phase & 50x6 mm for neutral circuits mounted on glazed porcelain or bakelite base and fitted with voltmeter, ammeter, selectorswitches for ammeter & voltmeter, electronic KWH meter, indicating lamps, cabin light, fabricated with 12 gauge M.S. plain sheet, painted with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrangement complete. Incoming : 1 No. 400A, 415 V, FP MCCB breaking capacity 50 KA with built in Thermo Magnetic Release. Outgoing : 1 No. 200A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 3 Nos. 100A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 1 No. 63A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. |
| 334 | 11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 X 95 sq mm |
| 335 | Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable3 X 95 sq mm |
| 336 | Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable3 X 95 sq mm |
| 337 | Drytype maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required. |
| 338 | Battery charging sets, one for trickle charging and other for boost charging suitable for operateion as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation. |
| 339 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 340 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming andrequired MCB of 32ADP, 64A FPfor outgoingto 11KV CR panel incontrol room. |
| 341 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm |
| 342 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm |
| 343 | Fire extinguisher 4.5 Kg DCP Type |
| 344 | Fire extinguisher 4.5 Kg CO2 Type |
| 345 | Fire extinguisher 22.5 Kg CO2 type |
| 346 | 12 Fire buckets with stand |
| 347 | M.S angle 50mmx50mmx6mm |
| 348 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 349 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 350 | Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room |
| 351 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 352 | Associated civil works |
| 353 | NAMCHI DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION |
| 354 | 11 KV, 800 Amp indoor VCB Panels- Incomer |
| 355 | 11 KV, 800 Amp indoor VCB Panels- Bus Coupler |
| 356 | 11 KV, 800 Amp indoor VCB Panels- Outgoing Feeders |
| 357 | 11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm |
| 358 | Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 359 | Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 360 | Drytype maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required. |
| 361 | Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation. |
| 362 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 363 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming andrequired MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 364 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm |
| 365 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm |
| 366 | Fire extinguisher 4.5 Kg DCP Type |
| 367 | Fire extinguisher 4.5 Kg CO2 Type |
| 368 | Fire extinguisher 22.5 Kg CO2 type |
| 369 | 12 Fire buckets with stand |
| 370 | M.S angle 50mmx50mmx6mm |
| 371 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 372 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 373 | Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room |
| 374 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 375 | Civil and other associated repair works |
| 376 | NAMCHI DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM,XLPE ARMOURED CABLE |
| 377 | 3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II |
| 378 | 110 mm dia. (95/70/50/35 sq.mm)Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex) |
| 379 | G.I Pipe 6\" Heavy Duty |
| 380 | G.I Pipe 4\" Heavy Duty |
| 381 | Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm |
| 382 | Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm |
| 383 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 384 | NAMCHI DIVISION - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR |
| 385 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 386 | Covered conductor 50 Sq. mm. |
| 387 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 388 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 389 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 390 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 391 | Insulating Piercing Connector |
| 392 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 393 | 11 KV Termination Kit for Covered Conductor |
| 394 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 395 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 396 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 397 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 398 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 399 | Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 400 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 401 | Red oxide paint @ 2 ltr/ pole |
| 402 | Aluminium paint @ 1.5 ltr / pole |
| 403 | G.I. Barbed Wire |
| 404 | 11 kV Caution Board |
| 405 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 406 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 407 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 408 | NAMCHI DIVISION - 250 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 409 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.250 KVA, 11/ 0.433 KV, Copper Wound |
| 410 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 630 A INCOMING:1 No. 630 A, 4P,50KA, MDO ACB. OUTGOING: 3 Nos. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 411 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 412 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 413 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 414 | Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362 |
| 415 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 416 | M.S.channelISLC75 (75X40X6mm) |
| 417 | M.S.channelISLC75 (75X40X6mm) |
| 418 | Back clamps of 75X8mm Flat |
| 419 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 420 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 421 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 422 | Red Oxide Metal Primer conforming to IS: 2074 |
| 423 | Aluminium paint |
| 424 | Danger Board 11000Volts |
| 425 | Danger Board 440Volts |
| 426 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 427 | Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 428 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 429 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 430 | NAMCHI DIVISION - INSTALLATION OF NEW 500 KVA 11/0.43 kV PACKAGED SUB-STATION |
| 431 | PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 500 KVA Oil cooled transformer(Al) |
| 432 | Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 433 | Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA. |
| 434 | NAMCHI DIVISION - 3.5 x 240 sq.mm New LT Underground Feeder |
| 435 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm |
| 436 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia |
| 437 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm |
| 438 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 439 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 440 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 441 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 442 | Aluminum thimblering 240sqmm |
| 443 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 444 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 445 | NAMCHI DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder |
| 446 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm |
| 447 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 448 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm |
| 449 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 450 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 451 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 452 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 453 | Aluminum thimblering 185sqmm |
| 454 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 455 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 456 | NAMCHI DIVISION - 3.5 x 150 sq.mm New LT Underground Feeder |
| 457 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 150 sqmm |
| 458 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 459 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 150 sqmm |
| 460 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 461 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 462 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 463 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 464 | Aluminum thimblering150sqmm |
| 465 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 466 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 467 | NAMCHI DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder |
| 468 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm |
| 469 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 470 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm |
| 471 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 472 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 473 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 474 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 475 | Aluminum thimblering120 sqmm |
| 476 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 477 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 478 | NAMCHI DIVISION - 4 x 16 sq.mmNew LT Underground Feeder |
| 479 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 480 | Aluminum thimblering 16sqmm |
| 481 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 482 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 483 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 484 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 485 | NAMCHI DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION |
| 486 | 2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 487 | 2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 488 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 489 | Aluminum thimblering10 & 16sqmm |
| 490 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 491 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 492 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 493 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 494 | NAMCHI DIVISION -3x50+1x35+1x16 sq.mm, LT Aerial Bunched Cables |
| 495 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 496 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 497 | 3 x 50 sq.mm + 1 x 16 sq.mm + 1 x 35 sq.mm, 1.1 KV with aluminum alloy bare messenger wire |
| 498 | LT A.B Cable tension clamps (Galvanized) |
| 499 | LT A B cable Suspension clamps (Galvanized) |
| 500 | Clamps for neutral for AB Cable |
| 501 | LT Dead End Clamp for L.T.A.B Cable |
| 502 | Service Rings half round |
| 503 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 504 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 505 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 506 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 507 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 508 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 509 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 510 | Anti-Climbing Device (Barbed Wire) |
| 511 | 11 KV Caution Board |
| 512 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 513 | Aluminium paint @ 1.0 ltr / pole |
| 514 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 515 | Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 516 | NAMCHI DIVISION -3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables |
| 517 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 518 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 519 | 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulatedmessenger wire |
| 520 | LT A.B Cable tension clamps (Galvanized) |
| 521 | LT A B cable Suspension clamps (Galvanized) |
| 522 | Clamps for neutral for AB Cable |
| 523 | LT Dead End Clamp for L.T.A.B Cable |
| 524 | Service Rings half round |
| 525 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 526 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 527 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 528 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 529 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 530 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 531 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 532 | Anti-Climbing Device (Barbed Wire) |
| 533 | 11 KV Caution Board |
| 534 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 535 | Aluminium paint @ 1.0 ltr / pole |
| 536 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 537 | Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 538 | NAMCHI DIVISION -3 x 95 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables |
| 539 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 540 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 541 | 3 x 95 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV aluminum alloy insulatedmessenger wire 1100V |
| 542 | LT A.B Cable tension clamps (Galvanized) |
| 543 | LT A B cable Suspension clamps (Galvanized) |
| 544 | Clamps for neutral for AB Cable |
| 545 | LT Dead End Clamp for L.T.A.B Cable |
| 546 | Service Rings half round |
| 547 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 548 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 549 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 550 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 551 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 552 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 553 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 554 | Anti-Climbing Device (Barbed Wire) |
| 555 | 11 KV Caution Board |
| 556 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 557 | Aluminium paint @ 1.0 ltr / pole |
| 558 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 559 | Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 560 | SORENG DIVISION - NEW 1 no x 5 MVA 66/11 kV POWER TRANSFORMER |
| 561 | 66/11 KV, 5 MVA Power transformer |
| 562 | SF6, 800amps 72.5 KV, 13.1 KA rated short circuit complete with operating mechanism and first filling of SF6 gas with supporting structure. |
| 563 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm |
| 564 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm |
| 565 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm |
| 566 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm |
| 567 | Indoor switchgear VCB panel for 11 KV Line feeder(Incomer) |
| 568 | Indoor switchgear VCB panel for 11 KV (bus sectionalizer) |
| 569 | Indoor switchgear VCB pannel for 11 kV line feeder ( outgoing ) |
| 570 | 200 KVA, 11/0.433 KV , 3-phase (outdoor type) with first filling of oil with off load tapping +2.5 %, + 5% with copper winding. |
| 571 | Fencing for 200KVA parapet mounted distribution substation of size 3x3 mtrs. constructed with 50x50x5mm MS angle vertical props, 35x35x6mm MS angle supports (double run), G.I. wire mesh, 50x6mm MS Flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc. |
| 572 | L.T. distribution Switch Board, outdoortype kiosk , 400 Amp, having electrolytic annealed copper bus bar 50x12 mm for phase & 50x6 mm for neutral circuits mounted on glazed porcelain or bakelite base and fitted with voltmeter, ammeter, selectorswitches for ammeter & voltmeter, electronic KWH meter, indicating lamps, cabin light, fabricated with 12 gauge M.S. plain sheet, painted with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrangement complete. Incoming : 1 No. 400A, 415 V, FP MCCB breaking capacity 50 KA with built in Thermo Magnetic Release. Outgoing : 1 No. 200A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 3 Nos. 100A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 1 No. 63A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. |
| 573 | 11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm |
| 574 | HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm |
| 575 | 11 KV 3 core XLPE cable for outgoing feeders3 X 95 sqmm |
| 576 | 11 KV 3 core XLPE cable for outgoing feeders3 X 120 sqmm |
| 577 | Heat shrinkable outdoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EOKT -3332-3382) ( Raychem make or equivalent) 3 C x 120 sqmm EPKT 3362 |
| 578 | Heat shrinkable outdoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EOKT -3332-3382) ( Raychem make or equivalent) 3 C x 095 sqmm EPKT 3352 |
| 579 | Heat shrinkable indoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EPKT -3091-3131) ( Raychem make or equivalent) 3 C x 120 sqmm EPKT 3111 |
| 580 | Heat shrinkable indoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EPKT -3091-3131) ( Raychem make or equivalent) 3 C x 095 sqmm EPKT 3101 |
| 581 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 582 | Dry powder type extinguisher of 50lb capacity mounted on wheel |
| 583 | CO2 Fire Extinguisher of 4.5 kg capacity wall mounted |
| 584 | Foam type Fire Extinguisher of one gallon capacity wall mounted |
| 585 | Laying of hand packed stone in switchyard and other control room repair works |
| 586 | SORENG DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION |
| 587 | 11 KV, 800 Amp indoor VCB Panels- Incomer |
| 588 | 11 KV, 800 Amp indoor VCB Panels- Outgoing Feeders |
| 589 | 11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm |
| 590 | Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 591 | Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm |
| 592 | Drytype maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required. |
| 593 | Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation. |
| 594 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 595 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming andrequired MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 596 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm |
| 597 | 1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm |
| 598 | Fire extinguisher 4.5 Kg DCP Type |
| 599 | Fire extinguisher 4.5 Kg CO2 Type |
| 600 | Fire extinguisher 22.5 Kg CO2 type |
| 601 | 12 Fire buckets with stand |
| 602 | M.S angle 50mmx50mmx6mm |
| 603 | 75x12 mm G.I Flats for risers for equipments, columns and structure |
| 604 | Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished |
| 605 | Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room |
| 606 | G.I Strips 35x6 mm of 1 Mtr lengthconforming to IS 227. |
| 607 | Repair works of existing structure |
| 608 | SORENG DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM XLPE ARMOURED CABLE |
| 609 | 3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II |
| 610 | 110 mm dia. (95/70/50/35 sq.mm)Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex) |
| 611 | G.I Pipe 6\" Heavy Duty |
| 612 | G.I Pipe 4\" Heavy Duty |
| 613 | Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm |
| 614 | Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm |
| 615 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 616 | SORENG DIVISION - 500 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 617 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.500 KVA, 11/0.43KV Copper Wound |
| 618 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 1000 A INCOMING:1 No. 1000 A, 4P,50KA, MDO ACB.OUTGOING: 1 No. 400 A TP MCCB, 50 KA, 3 No.200A TP MCCB, 50 KA& 1 No. 63A TP MCCB, 35 KAall with built in Thermo Magnetic Release. |
| 619 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 620 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 621 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 622 | Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362 |
| 623 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 624 | M.S.channelISLC75 (75X40X6mm) |
| 625 | M.S.channelISLC75 (75X40X6mm) |
| 626 | Back clamps of 75X8mm Flat |
| 627 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 628 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 629 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 630 | Red Oxide Metal Primer conforming to IS: 2074 |
| 631 | Aluminium paint |
| 632 | Danger Board 11000Volts |
| 633 | Danger Board 440Volts |
| 634 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 635 | Placement of 500 KVA distribution Transformer on parapet of size 1.5x1.5x1mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 636 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 637 | Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA. |
| 638 | SORENG DIVISION - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 639 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.- 100 KVA, 11/ 0.433 KV, Copper Wound |
| 640 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING:1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 641 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 642 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 643 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 644 | Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm |
| 645 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 646 | M.S.channelISLC75 (75X40X6mm) |
| 647 | M.S.channelISLC75 (75X40X6mm) |
| 648 | Back clamps of 75X8mm Flat |
| 649 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 650 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 651 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 652 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 653 | Aluminium paint @ 1.0 ltr / pole |
| 654 | Danger Board 11000Volts |
| 655 | Danger Board 440Volts |
| 656 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 657 | Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 658 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 659 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 660 | SORENG DIVISION - INSTALLATION OF NEW 250 KVA 11/0.43 kV PACKAGED SUB-STATION |
| 661 | PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 250 KVA Oil cooled transformer(Al) |
| 662 | Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 663 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 664 | SORENG DIVISION - 3.5 x 240 sq.mm New LT Underground Feeder |
| 665 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm |
| 666 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia |
| 667 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm |
| 668 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 669 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 670 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 671 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 672 | Aluminum thimblering 240sqmm |
| 673 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 674 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 675 | SORENG DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder |
| 676 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm |
| 677 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 678 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm |
| 679 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 680 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 681 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 682 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 683 | Aluminum thimblering 185sqmm |
| 684 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 685 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 686 | SORENG DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder |
| 687 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm |
| 688 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 689 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm |
| 690 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 691 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 692 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 693 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 694 | Aluminum thimblering120 sqmm |
| 695 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 696 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 697 | SORENG DIVISION - 3.5 x 50 sq.mm New LT Underground Feeder |
| 698 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 50 sqmm |
| 699 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 75 mm dia |
| 700 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 50 sqmm |
| 701 | Aluminum thimble ring 50sqmm |
| 702 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 703 | SORENG DIVISION - 4 x 16 sq.mmNew LT Underground Feeder |
| 704 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 705 | Aluminum thimblering 16sqmm |
| 706 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 707 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 708 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 709 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 710 | SORENG DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION |
| 711 | 2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 712 | 2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 713 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 714 | Aluminum thimblering10 & 16sqmm |
| 715 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 716 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 717 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 718 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 719 | SORENG DIVISION - 3 x 50 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables |
| 720 | 11 KV AERIAL BUNCHED CABLE (ABC)3x50 + 1x70 sqmm |
| 721 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 722 | 9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs |
| 723 | AB Cable hanging clamps / tension clamps (Galvanized) |
| 724 | 11 KV Suspension Clamp with attachment for AB Cable |
| 725 | J-Hook for laying of 11 KV AB cable |
| 726 | J-Hook Clamp for laying of 11 KV AB cable |
| 727 | Straight through Joint kit suitable for 95 - 120 sqmm |
| 728 | T-Jointing kit for 95 -120 sqmm |
| 729 | Termination kit for 95 - 120 sqmm |
| 730 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 731 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 732 | Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required. |
| 733 | Anti-Climbing Device (Barbed Wire) |
| 734 | 11 KV Caution Board |
| 735 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 736 | Aluminium paint @ 1.0 ltr / pole |
| 737 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 738 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 739 | SORENG DIVISION - 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables |
| 740 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 741 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 742 | 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulatedmessenger wire |
| 743 | LT A.B Cable tension clamps (Galvanized) |
| 744 | LT A B cable Suspension clamps (Galvanized) |
| 745 | Clamps for neutral for AB Cable |
| 746 | LT Dead End Clamp for L.T.A.B Cable |
| 747 | Service Rings half round |
| 748 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 749 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 750 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 751 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 752 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 753 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 754 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 755 | Anti-Climbing Device (Barbed Wire) |
| 756 | 11 KV Caution Board |
| 757 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 758 | Aluminium paint @ 1.0 ltr / pole |
| 759 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 760 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 761 | SORENG DIVISION -LED STREET-LIGHTING SYSTEM |
| 762 | LED Street light 45 Watt |
| 763 | 1.0 sqmm. ISI markedFRLSH PVCinsulated Single coreindustrial multistrand copper conductorvoltage grade upto 1100 V. |
| 764 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED4 Core x 16 sqmm |
| 765 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 766 | Polycarbonate junction box with bus bar arrangement & 6 Amp MCB |
| 767 | Red oxide paint. |
| 768 | Al.paint. |
| 769 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound. |
| 770 | G.I Earth Spikeconforming to IS 227. |
| 771 | G.I.street light bracket |
| 772 | 8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs |
| 773 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 774 | Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54\"x2\"x2\"depth earth pit and plastered parapet |
| 775 | GYALSHING - NEW 1 no x 5 MVA 66/11 kV POWER TRANSFORMER |
| 776 | 66/11 KV, 5 MVA, POWER TRANSFORMER |
| 777 | SF6, 800amps 72.5 KV, 13.1 KA rated short circuit complete with operating mechanism and first filling of SF6 gas with supporting structure. |
| 778 | 72.5 KV, 3 core current transformer having ratio 400 -300-200/1+1+1 Aand of accuracy class and burden of 30 VA with first filling of oil and complete with terminal connectors. |
| 779 | 60 kV Lightning arrestor complete with insulating base and surge monitors & connector terminals connection. |
| 780 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm |
| 781 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm |
| 782 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm |
| 783 | 1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm |
| 784 | Indoor switchgear VCB panel for 11 KV Line feeder(Incomer) |
| 785 | Indoor switchgear VCB panel for 11 KV (bus sectionalizer) |
| 786 | Indoor switchgear VCB pannel for 11 kV line feeder ( outgoing ) |
| 787 | Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429) |
| 788 | 3 x 300 sqmm, 11 KV(E) XLPE, Al. Conductor cable. |
| 789 | Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size; (3x300 sqmm) |
| 790 | Heat shrinkable indoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size; (3x300 sqmm) |
| 791 | GYALSHING - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION |
| 792 | 11 KV, 800 Amp indoor VCB Panels- Incomer |
| 793 | 11 KV, 800 Amp indoor VCB Panels- Outgoing Feeders |
| 794 | Drytype maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required. |
| 795 | Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation. |
| 796 | 110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 797 | 415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming andrequired MCB of 32ADP, 64A FPfor outgoingto 66KV & 11KV CR panel incontrol room. |
| 798 | GYALSHING - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 120 SQ.MM XLPE ARMOURED CABLE |
| 799 | 3 x 120 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II |
| 800 | 160 mm. dia. (240/185/150/120 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex) |
| 801 | G.I Pipe 6\" Heavy Duty |
| 802 | G.I Pipe 4\" Heavy Duty |
| 803 | Aluminium Thimble of size 120 sq.mm |
| 804 | Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 120 sqmm EPKT 3362 |
| 805 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 806 | GYALSHING - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM XLPE ARMOURED CABLE |
| 807 | 3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II |
| 808 | 110 mm dia. (95/70/50/35 sq.mm)Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex) |
| 809 | G.I Pipe 6\" Heavy Duty |
| 810 | G.I Pipe 4\" Heavy Duty |
| 811 | Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm |
| 812 | Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm |
| 813 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 814 | GYALSHING - NEW 11 kV LINE ON 11 KV COVERED CONDUCTOR 70 SQMM |
| 815 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 816 | Covered conductor 70 Sq. mm. |
| 817 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 818 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 819 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 820 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 821 | Insulating Piercing Connector |
| 822 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 823 | 11 KV Termination Kit for Covered Conductor |
| 824 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 825 | M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808 |
| 826 | Back Clamps 75 x 8 mm flat for holding the channels |
| 827 | 11 KV Disc Insulator70 KN T/C Type (Porcelain/Polymer) |
| 828 | Complete hardware fittings for 11 kv disc insulator t/c typeconforming to is: 731 suitable for Squirrel Conductor |
| 829 | M.S Nuts & Bolts 16mm diax 40mm full thread conforming to IS: 1364 |
| 830 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 831 | Aluminum thimble ring 50sqmm |
| 832 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 833 | Red Oxide Metal Primer conforming to IS: 2074 |
| 834 | Aluminum Paintconforming to IS: 2339 |
| 835 | Danger Board 11000Volts |
| 836 | G.I Barbed Wire |
| 837 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 838 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 839 | GYALSHING - NEW 11 kV LINE ON 11 KV COVERED CONDUCTOR 50 SQMM |
| 840 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 841 | Covered conductor 70 Sq. mm. |
| 842 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 843 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 844 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 845 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 846 | Insulating Piercing Connector |
| 847 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 848 | 11 KV Termination Kit for Covered Conductor |
| 849 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 850 | M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808 |
| 851 | Back Clamps 75 x 8 mm flat for holding the channels |
| 852 | 11 KV Disc Insulator70 KN T/C Type (Porcelain/Polymer) |
| 853 | Complete hardware fittings for 11 kv disc insulator t/c typeconforming to is: 731 suitable for Squirrel Conductor |
| 854 | M.S Nuts & Bolts 16mm diax 40mm full thread conforming to IS: 1364 |
| 855 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 856 | Aluminum thimble ring 50sqmm |
| 857 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 858 | Red Oxide Metal Primer conforming to IS: 2074 |
| 859 | Aluminum Paintconforming to IS: 2339 |
| 860 | Danger Board 11000Volts |
| 861 | G.I Barbed Wire |
| 862 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 863 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 864 | GYALSHING - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 70 SQMM COVERED CONDUCTOR |
| 865 | 11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 99 sqmm Conductor including all nuts & bolts complete without arms. |
| 866 | Covered conductor 70 Sq. mm. |
| 867 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 868 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 869 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 870 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 871 | Insulating Piercing Connector |
| 872 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 873 | 11 KV Termination Kit for Covered Conductor |
| 874 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 875 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 876 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 877 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 878 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 879 | Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 880 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 881 | Red oxide paint |
| 882 | Aluminium paint |
| 883 | G.I. Barbed Wire |
| 884 | 11 kV Caution Board |
| 885 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 886 | Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix. |
| 887 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 888 | GYALSHING - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR |
| 889 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 890 | Covered conductor 50 Sq. mm. |
| 891 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts |
| 892 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator |
| 893 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts |
| 894 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts |
| 895 | Insulating Piercing Connector |
| 896 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor |
| 897 | 11 KV Termination Kit for Covered Conductor |
| 898 | M.S.channel 75X40X6mmX2.2 m long for DP. |
| 899 | Back clamps of 75x8mm M.S. flat for holdingchannel. |
| 900 | M.S. nuts & bolts of 16mm dia.X 40mm length. |
| 901 | M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure. |
| 902 | Pole top channel 75X40X 6mmX0.3m long S.P. structure. |
| 903 | Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc. |
| 904 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 905 | Red oxide paint @ 2 ltr/ pole |
| 906 | Aluminium paint @ 1.5 ltr / pole |
| 907 | G.I. Barbed Wire |
| 908 | 11 kV Caution Board |
| 909 | G.I. Wire 4 mm (8-SWG) for Continuous Earth |
| 910 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 911 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 912 | GYALSHING - 250 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 913 | 50 HZ, ONAN COOLED, OUTDOOR/INDOOR TYPE DISTRIBUTION TRANSFORMER PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS: 1180(PART-I)2014:ENERGY EFFICIENCY LEVEL 2 -- 250 KVA, 11/ 0.433 KV, Copper Wound |
| 914 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 630 A INCOMING:1 No. 630 A, 4P,50KA, MDO ACB. OUTGOING: 3 Nos. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 915 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 916 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 917 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 918 | Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm |
| 919 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 920 | M.S.channelISLC75 (75X40X6mm) |
| 921 | M.S.channelISLC75 (75X40X6mm) |
| 922 | Back clamps of 75X8mm Flat |
| 923 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 924 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 925 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 926 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 927 | Aluminium paint @ 1.0 ltr / pole |
| 928 | Danger Board 11000Volts |
| 929 | Danger Board 440Volts |
| 930 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 931 | Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 932 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 933 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 934 | GYALSHING - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER |
| 935 | 50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMERWITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2.- 100 KVA, 11/ 0.433 KV, Copper Wound |
| 936 | L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING:1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 937 | 11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer) |
| 938 | 11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer) |
| 939 | 3 X 35 sq.mm 11 KV XPLE Cable |
| 940 | Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm |
| 941 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 942 | M.S.channelISLC75 (75X40X6mm) |
| 943 | M.S.channelISLC75 (75X40X6mm) |
| 944 | Back clamps of 75X8mm Flat |
| 945 | M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364 |
| 946 | 9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3) |
| 947 | 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 948 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 949 | Aluminium paint @ 1.0 ltr / pole |
| 950 | Danger Board 11000Volts |
| 951 | Danger Board 440Volts |
| 952 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 953 | Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix. |
| 954 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 955 | Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA. |
| 956 | GYALSHING - 3.5 x 300 sq.mm New LT Underground Feeder |
| 957 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 300 sqmm |
| 958 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia |
| 959 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 300 sqmm |
| 960 | Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections. |
| 961 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 962 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 963 | Aluminum thimblering 240sqmm |
| 964 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 965 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 966 | GYALSHING - 3.5 x 240 sq.mm New LT Underground Feeder |
| 967 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm |
| 968 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia |
| 969 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm |
| 970 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 971 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 972 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 973 | Aluminum thimblering 240sqmm |
| 974 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 975 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 976 | GYALSHING - 3.5 x 185 sq.mm New LT Underground Feeder |
| 977 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm |
| 978 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia |
| 979 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm |
| 980 | Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection. |
| 981 | Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound. |
| 982 | Copper strips 25mm X 5mm from Cu. plate earth electrode |
| 983 | Aluminum thimblering 185sqmm |
| 984 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 985 | Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix. |
| 986 | GYALSHING - 3.5 x 50 sq.mm New LT Underground Feeder |
| 987 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 50 sqmm |
| 988 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 75 mm dia |
| 989 | L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 50 sqmm |
| 990 | Aluminum thimble ring 50sqmm |
| 991 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 992 | GYALSHING - MIXED TYPE LT CABLE FOR SERVICE CONNECTION |
| 993 | 2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 994 | 2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable |
| 995 | 4 core 16 sqmm.1.1 kV grade PVC L.T. aluminium armoured cable |
| 996 | Aluminum thimblering10 & 16sqmm |
| 997 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 998 | FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2\" dia |
| 999 | Sundries like saddle, chinese nails, insulation tape, drill bits etc |
| 1000 | Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench. |
| 1001 | GYALSHING - 3 x 70 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables |
| 1002 | 11 KV AERIAL BUNCHED CABLE (ABC)3x70 + 1x70 sqmm |
| 1003 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 1004 | 9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs |
| 1005 | AB Cable hanging clamps / tension clamps (Galvanized) |
| 1006 | 11 KV Suspension Clamp with attachment for AB Cable |
| 1007 | J-Hook for laying of 11 KV AB cable |
| 1008 | J-Hook Clamp for laying of 11 KV AB cable |
| 1009 | Straight through Joint kit suitable for 95 - 120 sqmm |
| 1010 | T-Jointing kit for 95 -120 sqmm |
| 1011 | Termination kit for 95 - 120 sqmm |
| 1012 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 1013 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 1014 | Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required. |
| 1015 | Anti-Climbing Device (Barbed Wire) |
| 1016 | 11 KV Caution Board |
| 1017 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 1018 | Aluminium paint @ 1.0 ltr / pole |
| 1019 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 1020 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 1021 | GYALSHING - 3 x 50 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables |
| 1022 | 11 KV AERIAL BUNCHED CABLE (ABC)3x50 + 1x70 sqmm |
| 1023 | 9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs. |
| 1024 | 9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs |
| 1025 | AB Cable hanging clamps / tension clamps (Galvanized) |
| 1026 | 11 KV Suspension Clamp with attachment for AB Cable |
| 1027 | J-Hook for laying of 11 KV AB cable |
| 1028 | J-Hook Clamp for laying of 11 KV AB cable |
| 1029 | Straight through Joint kit suitable for 95 - 120 sqmm |
| 1030 | T-Jointing kit for 95 -120 sqmm |
| 1031 | Termination kit for 95 - 120 sqmm |
| 1032 | Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate |
| 1033 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 1034 | Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required. |
| 1035 | Anti-Climbing Device (Barbed Wire) |
| 1036 | 11 KV Caution Board |
| 1037 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 1038 | Aluminium paint |
| 1039 | Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 1040 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 1041 | GYALSHING - 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables |
| 1042 | 8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21 |
| 1043 | 8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs. |
| 1044 | 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulatedmessenger wire |
| 1045 | LT A.B Cable tension clamps (Galvanized) |
| 1046 | LT A B cable Suspension clamps (Galvanized) |
| 1047 | Clamps for neutral for AB Cable |
| 1048 | LT Dead End Clamp for L.T.A.B Cable |
| 1049 | Service Rings half round |
| 1050 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 1051 | Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 1052 | Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate |
| 1053 | T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound. |
| 1054 | Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire |
| 1055 | Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit |
| 1056 | Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit |
| 1057 | Anti-Climbing Device (Barbed Wire) |
| 1058 | 11 KV Caution Board |
| 1059 | Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole) |
| 1060 | Aluminium paint @ 1.0 ltr / pole |
| 1061 | Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix. |
| 1062 | Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit. |
| 1063 | GYALSHING -LED STREET-LIGHTING SYSTEM |
| 1064 | LED Street light 45 Watt |
| 1065 | 1.0 sqmm. ISI markedFRLSH PVCinsulated Single coreindustrial multistrand copper conductorvoltage grade upto 1100 V. |
| 1066 | 1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED4 Core x 16 sqmm |
| 1067 | RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM250 mm dia |
| 1068 | Polycarbonate junction box with bus bar arrangement & 6 Amp MCB |
| 1069 | Red oxide paint. |
| 1070 | Al.paint. |
| 1071 | SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound. |
| 1072 | 8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs |
| 1073 | Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench. |
| 1074 | Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54\"x2\"x2\"depth earth pit and plastered parapet |
| 1075 | GYALSHING - RENOVATION & ESTABLISHMENT OF ELECTRICAL STORAGE ROOM IN THE EXISTING OLD CONTROL ROOM NEAR 11/11 KV SWITCH YARD AT KYONGSHAPOWER COLONEYGYALSHING, WEST SIKKIM. |
| 1076 | Dismantling of Structures (Dismantling of existing structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) |
| 1077 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 1078 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 1079 | Providing and Laying in position cement concrete of (1:2:4) specified grade including compacting curing etc all complete. |
| 1080 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete |
| 1081 | Provision for fitting and fixing for scaffolding for plastering and painting etc.All complete. Bamboo |
| 1082 | Provision for fitting and fixing for scaffolding for plastering and painting etc.All complete. Labour |
| 1083 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete. |
| 1084 | Providing, fitting, fixing of 24 BWG Pre-painted HULASsheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete |
| 1085 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 1086 | Providing fitting and fixing 23cm deep 24BWG GP sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets complete. |
| 1087 | Providing and Laying 12mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing complete. |
| 1088 | Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4stone aggregate of size 12.5mm and down )flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. (without glass strip) curing etc complete in all building floors wherever specified. |
| 1089 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. With locally available timber. |
| 1090 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 1091 | Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete. |
| 1092 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 1093 | White washing with white lime in two or more coats to give an even shade include- ding cleaning the surface to remove dirt, dust, mortar drops etc on old surface complete. |
| 1094 | Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give an even shade including preparation of surface etc complete. |
| 1095 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on old surface. |
| 1096 | Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete. |
| 1097 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 1098 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Brass (Chromium Plated) Size 300x16mm |
| 1099 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Ms (Bright Finish) Size 250x16mm |
| 1100 | Providing and fixing Tower bolt 200x100mm with necessary screws etc complete. MS |
| 1101 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. Brass (Chromium Plated) |
| 1102 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 1103 | Providing and Laying plain coloredglazed ceramic tiles of size 300mm x 300mm in plain colours (white, grey, ivory platinum, leather brown etc or equivalent), on floors landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 1104 | PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer\"s specification. |
| 1105 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Surfaced Road |
| 1106 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Loading& Unloading |
| 1107 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Headload of stock material (within 100 mts) |
| 1108 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Surfaced Road |
| 1109 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Loading& Unloading |
| 1110 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Headload of stock material (within 100 mts) |
| 1111 | Cost of Haulage excluding loading and unloading on surfaced road.STONE Surfaced Road |
| 1112 | Cost of Haulage excluding loading and unloading on surfaced road. STONE Loading& Unloading |
| 1113 | Cost of Haulage excluding loading and unloading on surfaced road. STONE Headload of stock material (within 100 mts) |
| 1114 | Cost of Haulage excluding loading and unloading on surfaced road.STONE CHIPS Surfaced Road |
| 1115 | Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Loading& Unloading |
| 1116 | Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Headload of stock material (within 100 mts) |
| 1117 | Protective Wall - Provision for Slip and Debris Clearance and throwing of soil all complete. |
| 1118 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 1119 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 1120 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Surfaced Road |
| 1121 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Loading& Unloading |
| 1122 | Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Headload of stock material (within 100 mts) |
| 1123 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Surfaced Road |
| 1124 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Loading& Unloading |
| 1125 | Cost of Haulage excluding loading and unloading on surfaced road. SAND Headload of stock material (within 100 mts) |
| 1126 | Cost of Haulage excluding loading and unloading on surfaced road.STONE Surfaced Road |
| 1127 | Cost of Haulage excluding loading and unloading on surfaced road. STONE Loading& Unloading |
| 1128 | Cost of Haulage excluding loading and unloading on surfaced road. STONE Headload of stock material (within 100 mts) |
| 1129 | Cost of Haulage excluding loading and unloading on surfaced road.STONE CHIPS Surfaced Road |
| 1130 | Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Loading& Unloading |
| 1131 | Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Headload of stock material (within 100 mts) |
| 1132 | Cost of Haulage by manual means. EARTH Loading& Unloading |
| 1133 | Cost of Haulage by manual means EARTH Headload of stock material (within 200 mts) |
| 1134 | Provision for internal & external water supply & sanitation |
| 1135 | Provision for Furniture & Furnishing |
| 1136 | GYALSHING - UPGRADATION& EXTENSION OF 11/11KV CONTROL ROOM (STAGE-III) AT PELLING UNDER IPDS IN WEST SIKKIM |
| 1137 | Dismantling of Structures (Dismantling of existing structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) |
| 1138 | Provision for Chipping, Scrapping & removing of old flooring, plastering and un-serviceable portion, removal of damaged parts of buildings, by manual mean etc, all completes. |
| 1139 | Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres. |
| 1140 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains exceeding 30cm depth, 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 1141 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. |
| 1142 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 40mm & down size) |
| 1143 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 1144 | Filling inside plinth in building works with23cm layers, consolidated to 15cm including watering, ramming etc, all complete. |
| 1145 | Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge. |
| 1146 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
| 1147 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 1148 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - foundation CR trench |
| 1149 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - column |
| 1150 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - slab |
| 1151 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - lintel and beam |
| 1152 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
| 1153 | Providing and Laying40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring withfloating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified. |
| 1154 | Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete. |
| 1155 | Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. |
| 1156 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 1157 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 1158 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 1159 | Providing and Laying plain coloredglazed ceramic tiles of size 300mm x 300mm in plain colours (white, grey, ivory platinum, leather brown etc or equivalent), on floors landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 1160 | Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 1161 | Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation)with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete. |
| 1162 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 1163 | Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete. |
| 1164 | Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Chargeall complete. |
| 1165 | PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer\"s specification. |
| 1166 | Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete. |
| 1167 | Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 1168 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 1169 | Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both sidewith 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plasterwith neat cement polishing & rounding of junction,as per the direction ofthe Engineer in Charge. |
| 1170 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. SAND - SURFACE ROAD |
| 1171 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. SAND - LOADING & UNLOADING |
| 1172 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE - SURFACE ROAD |
| 1173 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE - LOADING & UNLOADING |
| 1174 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE CHIPS - SURFACE ROAD |
| 1175 | Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE CHIPS - LOADING & UNLOADING |
| 1176 | Cost of Haulage Excluding Loading and Unloading. stock materials. CEMENT - SURFACE ROAD |
| 1177 | Cost of Haulage Excluding Loading and Unloading.stock materials. CEMENT - LOADING & UNLOADING |
| 1178 | Cost of Haulage Excluding Loading and Unloading. stock materials. TOR STEEL - SURFACE ROAD |
| 1179 | Cost of Haulage Excluding Loading and Unloading.stock materials. TOR STEEL - LOADING & UNLOADING |
| 1180 | Protective Wall - Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 1181 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 1182 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. . |
| 1183 | Loading and unloading of stock and non stock material. CEMENT |
| 1184 | Loading and unloading of stock and non stock material. SAND |
| 1185 | Cost of haulage of stock and non-stock material. CEMENT (Within 15 km) |
| 1186 | Cost of haulage of stock and non-stock material. STONE (Within 23 km) |
| 1187 | Cost of haulage of stock and non-stock material. SAND (Within 50 km) |
| 1188 | Headload of stock materials for a distance beyond 30 m and within 100m distance. |
| 1189 | Headload of non-stock materials for a distance beyond 30m and within 100m distance. |
| 1190 | Provision for internal & external water supply & sanitation |
| 1191 | Provision for Furniture & Furnishing |
AI Tender Summary
Tender Timeline
Apr 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender