Construction Of Colouring And Providing Furniture To Admistrative Building Drda Yavatmal Tq.Dist.Yavatmal, Yavatmal-Maharashtra

Construction Of Colouring And Providing Furniture To Admistrative Building Drda Yavatmal Tq.Dist.Yavatmal- 1 Providng And Fixing In Position Anodised Extruded Aluminum Partitions, Partly Glazed And Partly Laminated Having Frame Made Out Of Extruded Tubular Section Of Size 40 Mm X 60 Mm With 12 Mm Thick Three Layered Flat Pressed Teak Wood Particle Board Bonded With Bwp Type Exterior Grade Phenol Formaldehyde Synthetic Resin Conforming To Is 12823-1990, Laminated On Both Sides, Novateakor Equivalent And 5 Mm Thick Selected Quality Plain / Float Glass Panels Fixed With Aluminum Glass Clips 12 Mm X 12 Mm And Rubber Cushioning Beading To Glass Partitions As Per Approved Drawing Etc. Competebrick Work In C.M 1:5 Mix Including All Labour Charges Etc Complete 2 Scrapping The Old Plastered Internal Surface With Sand Paper And Coating The Entire Surface With Mixture Of Whiting Or Glue And Linseed Oil Including Scaffolding Etc. Complete As Directed. 3 Providing And Applying Two Coats Of Wall Care Putty On Plastered Surface And Ceiling And Walls To Prepare Surface Even And Smooth Of Approved Make, Etc Complete. 4 Providing And Applying Priming Coat On Concrete / Masonary / Asbestos Cement Plastered Surfaces Including Scaffolding If Necessary, Preparing The Surface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter And Sand Papering As Required Etc. Complete. 5 Providing And Applying Interior Wall Finish Luster Of Asian / Berger / Nerolac / Dulux Paints Or Equivalent Make On Internal Wall Surface As Detailed Below Scrapping The Surface With Emery Paper And Wipe Clean. Applying Asian / Berger / Nerolac / Duuex Paints Or Equivalent Wall Primer With Brushwith Mineral Turpentine With Brush 8 To 10% And Oil 15 To 20% With Roller And Allowing To Dry For A Period 6 To 8 Hours. Applying Asian / Berger / Nerolac / Dulex Paints Or Equivalent Acrylic Wall Putty With Appropriate Proportion Of Water Allowing To Dry For Period 4 To 6 Hours. Scrapping With Emery Paper 180 And Wipe Clean. Applying Asian / Berger / Nerolac / Dulux Paints Or Equivalent Wall Primer With Brush With Mineral Turpentine 8 To 10% And Oil 15 To 20% With Roller Scrapping Emery Paper 320 And Wipe Clean, Applying Asian / Berger / Nerolac / Dulux Paints Or Equivalent Interior Wall Finish Luster 1St Coat With Brush / Rubber / Spray With Mineral Turpentine 7 To 9% And Oil With Roller 19 To 21% After 8 Hours Of Activity Applying 2Nd Coat Of Asian / Berger / Nerolac / Dulux Paints Or Equivalent Interior Wall Finish Lustre With Mineral Turpentine 7 To 9 % With Brush And Oil With Roller 19 To 21% After Allowing Dry For The Period Of 6 To 8 Hours Activity. ( With Prior Approval Of S.E. ) 6 Providing And Applying Two Coats Of Exteriorweather Shield Paint Of Approved Manufacture Andofapproved Colourtotheplasteredsurfacesincludingcleaning, Preparingtheplaster Surface , Applying Primer Coat , Scaffolding If Necessary, And Watering The Surface For Two Days Etccomplete.Note: For Item Number 15 To 18 Prior Approval Of Superintending Engineer Will Be Necessary 7 Providing And Fixing Frame Work Of Galvanised Iron For Suspended False Ceiling Which Includes Galvanised Iron Perimeter Channels Of Size 27 Mm & 0.5 Mm Thick Having One Flange Of 20 Mm And Another Of 30 Mm Along With Perimeter Of The Ceiling, Fixing In Brick Wall / Partition With The Help Of Rawal Plugs And Screws, Suspending Galvenised Iron Intermediate Channels Of Size 45 Mm And 0.9 Mm Thick With Two Flanges Of 15 Mm Each From The Soffit At 1200 Mm Centers With Steel Galvanised Iron Hanger Of Width 25 Mm X 0.5 Mm Fasteners, Ceiling Section Of 0.5 Mm Thickness Having Curved Wedge Of 51.5 Mm And Two Flanges Of 26 Mm Each With Lips Of 10.5 Mm Fixed To The Intermediate Channel With The Help Of Connecting Clips And In Direction Perpendicular To The Intermediate Channel At 450 Mm Centers, 12.5 Mm Dry Walls Screws At 230 Mm Centers; Fixing Screws Mechanically Either With Screw Driver Or Drilling Machine With Suitable Attachment Etc. Complete. 8 Providing And Fixing False Ceiling Of 10 To 12 Mm Thick Decorative Boards Of Fibrous Plaster Of Paris Including Scaffolding If Necessary All Architectural Work Like Mouldings, Cornices, Coves, Domes, Cups As Per Detailed Drawings And Three Coats Of Spray Painting To Boards Etc. Complete. ( Excluding Frame Work, Runners And Mild Steel Suspenders ) . 9 Providing And Applying Priming Coat Over New / Old Steel And Other Metal Surfaces Including Preparing The Surface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter And Scoured With Wire Brushes, Fine Steel Wool, Scrappers And Sand Paper, Scaffolding Etc. Complete. 10 Providing And Applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work In Buildings, Including Scaffolding If Necessary, Cleaning And Preparing The Surface ( Excluding Primer Coat ) Etc. Complete. 11 Providing And Fixing Collapsible Steel Gate In One / Two Leaves With Hot Rolled Vertical Channels Of 18 X 9 X 3 Mm Minimum Size, Crossings Of M.S. Flats Of Size 18 X 5 Mm T Or E Section For Runner Of Minimum 40 X 6 Mm Size For Flange, M.S. Flat For Top Runner Of Minimum Size 40 X 12 Mm With Roller Wheels Confirming To Grade F.G. 150 Fitted With Snap Headed Rivets Of Minimum Size 6 Mm Max. Spacing Of Vertical Channels Be 100 Mm Enclosed Gate Position And Clear Space Of 150 Mm Between Two Sets Of Crossings With Hold Fasts, Stoppers, Spaces, Handles, Locking Arrangement And One Coat Of Red Lead Primer & Oil Painting Etc. Complete. ( I.S. 10521-1983 ) . 12 Medium Height Partition @ 1800 / 1200Httile Based Partition System:-Tile Based Aluminum Partition System Of 1800 / 1200 Mm Ht. Made Of 60Mm Thk Aluminum Frames Having Two Separate Race Ways For Laying Electrical & Computer Wiring. The Wire Management Shall Be Through To The Race Way To Be Fitted At Bottom Of Partition And Other Immediately Below Of Work Top With Hook On Type Raceway Cover For Easy Access Of Wires. Frames To Be Joined By Aluminum Connectors With M6 X 16 Pan-Head Machin Screw And Washer With Aluminum Post Cover. Post Cover Of Snap On Fashion To Be Connected On Aluminum Connectors. All Visible Aluminium To Be In Anodized Finish. The Top / Exposed Sides Of The Frame And Posts Should Be Covered With Horizontal / Vertical Trim And Caps Made Of Aluminum In Anodized Finish In Order To Enhance Its Look.Upper Tiles Of Partition To Be In Soft Board Or Marker Tile Of 9Mm. Thk., And Prelaminated Partical Board Lower Tiles In Laminate Finish Of 9Mm. Thk. On Both The Sides. 13 Free Standing Table @ 1500Lx600dx750htproviding And Fixing Table Of Size 1500 X 600 X 750 Mm. Top: Made From 25 Mm Prelaminated Particle Board.All Edges Are Covered By 2 Mm. Thk. Pvc Edge Bands Glued By Hot Melt Glue Applied By Auto Edge Banding Machine.Legs : C Shape Made From Crca Sheet With Powder Coat Finish. Modesty Panel : Made From 18Mm Both Side Prelaminated Particle Boards.All Edges Are Covered By 0.8Mm Pvc Edge Bands Glued By Hot Melt Glue Applied By Auto Edge Banding Machine.Keyboard Tray ( Without Mouse Tray ) :-Metal Powder Coated - Black Color, Cpu Trolley :-Metal Powder Coated - Black Color, 3 Drawer Pedestal Unit Having Overall Size 392L X 450D X 680Ht. Mm. With Central Lock And Key. Drawers And Body Are Complete Metal With Powder Coat Finish, Facia In 18 Mm Prelaminated Particle Board, 14 Providing & Fixing Curviliner Workstation @ 1500 / 1500Lx600 / 600Dx750htproviding & Fixing Curviliner Workstation @ 1500 / 1500Lx600 / 600Dx750ht, Curvilinear Table Top @ 1500 / 1500Lx600 / 600D :- Top To Be Made Of 25 Mm Thick Prelaminated Particle Board With Pvc Edge Band, Gable End To Be Made Of 25 Mm Thick Prelaminated Particle Board With Pvc Edge Band, Keyboard Tray ( Without Mouse Tray ) :-Metal Powder Coated - Black Color, Cpu Trolley :-Metal Powder Coated - Black Color, Along With 3 Drawer Pedestal Unit Having Overall Size 392L X 450D X 680Ht. Mm. With Central Lock And Key. 3 Drawers And Body Are Complete Metal With Powder Coat Finish, Facia In 18 Mm Prelaminated Particle Board, 15 Credestal @ 1200Lx450lx650ht Providing & Fixing Of Low Height Credestal @ 1200L X 450D X 650H :- To Be Made Out Of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal In Between ) As Per Drawing.As Directed Byengineer-In-Charge 16 Providing & Arrangemnt Of High Back Chair - Tilt Mechanism With Multilocking, High Density Cushion On Seat Composite Leather With Metallic Silver Finish Base And Arms With P.U.Castors Gaslift For Height Adjustment. 17 Providing And Fixing In Position. ( As Per I.S.1868 / 1982 ) Aluminium Sliding Window Of Two Tracks With Rectangular Pipe Having Overall Dimension 63.50 X 38.10 X 1.02 Mm At Weight 0.547 Kg / Rmt. And Window Frame Bottom Track Section 61.85 X 31.75 X 1.20 Mm At Weight 0.695 Kg / Rmt. Top And Side Track Section 61.85 X 31.75 X 1.30 Mm At Weight 0.659 Kg / Rmt. The Shutter Should Be Of Bearing Bottom 40 X 18 X 1.25 Mm At Weight 0.417 Kg / Rmt. Inter Locking Section 40 X 18 X 1.10 Mm At Weight 0.469 Kg / Rmt. And Handle Section 40 X 18 X 1.25 Mm At Weight 0.417 Kg / Rmt. And Top Section 40 X 18 X 1.25 Mm At Weight 0.417 Kg / Rmt. As Per Detailed Drawings And As Directed By Engineer In Charge With All Necessary Aluminium Sections Fixtures And Fastenings Such As Roller Bearing In Nylon Casting And Self Locking Catch Fitted In Vertical Section Of Shutter Including 5 Mm Thick Plain Glass With All Required Screws And Nuts Etc, Complete. With Powder Coating With Box 18 Providing And Fixing In Position, Single Shuttered Aluminium Extruded Powder Coated Openable Door Of Overall Size 0.90 M X 2.40 M With Aluminium Door Frame Of Powder Coated Section 101.60 X 44.75Mm , 3.18 Mm Thick And Shutter Comprising Of Powder Coated Section Having Bottom And Lock Rail Of Size 150 Mm X 44.5 Mm X 3.00 Mm Thick Top Rails 47.62 X 44.45 Mm X 3.00 Mm Thick , Vertical Style 47.62 X 44.45 Mm, 3.00 Mm Thick And For Shutter Plain Glass Panes 5 Mm Thick For Top Panels And 12Mm Thick Both Side Laminated Phenol Bonded Particle Board Panels For Bottom Panels Etc. , I.S.I. Mark , With Bijagirihaving Heavy Duty Concealed Lock, Necessary Beading, Glazing Clips, Pvc Gaskets, 250Mm Length Tower Bolts, 150Mm Diam. Pad Handle, Etc. As Per Detailed Design And Drawing Or As Directed By Engineer In Charge Including All Materials , Labours, And Equipment Etc.Complete 19 Providing Internal Cement Plaster 12Mm Thick In Single Coat In Cement Mortar 1:5 Without Neeru Finish To Concrete Or Brick Surfaces, In All Positions Including Scaffolding And Curing Etc. Complete. 20 Providing And Fixing Curtqains With Fitting Accessories Made Of Silk Fabric Including Labour Charges Etc. Complete. As Directed By Engineer Incharge

INR 1180 /-

INR 18700.0 /-

Refer document

Name of Work: Colouring and providing furniture to Admistrative building DRDA Yavatmal Tq.Dist.Yavatmal

Sl. No.	Item Description
1	Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 12823-1990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. competeBrick work in C.M 1:5 mix including all labour charges etc complete
2	Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed.
3	Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
4	Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
5	Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brushwith mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.(With prior approval of S.E.)
6	Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapproved colourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary
7	Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm & 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.
8	Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders).
9	Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete.
10	Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
11	Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).
12	Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM:-Tile based Aluminum partition system of 1800/1200 mm ht. made of 60mm thk aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machin screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be in anodized finish. The top/ exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized finish in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of 9mm. thk., and prelaminated partical board lower tiles in laminate finish of 9mm. thk. on both the sides.
13	Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
14	Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band,GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
15	Credestal @ 1200Lx450Lx650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between )as per drawing. As directed byEngineer-in-charge
16	Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT.
17	Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box
18	Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark ,with bijagirihaving heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete
19	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
20	Providing and fixing curtqains with fitting accessories made of silk fabric including labour charges etc. complete. As directed by engineer Incharge