Tender For Installation Of Submersible Pump At Bhandaria Primary School Under Jara Gp At Bhandaria Within Chandrakona-I Panchayat Samity Under 15 Cfc ( Code-68712247 )
Tender Value
1.27 Lakhs
Estimated cost
Bid Submission
01 May 2023
0 days left
EMD
2550
Bank guarantee accepted
Document Fee
255
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhandaria → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible Pump At Bhandaria Primary School Under Jara Gp At Bhandaria Within Chandrakona-I Panchayat Samity Under 15 Cfc ( Code-68712247 )
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tubewell of required dia. by water jet system through any type of soil strsta including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tubewell should have a minimum 50 mm.gap in between the outside of the tubewell pipe and the bore. For depth upto 150 m. for 50 mm. dia. tube well with top enlargement of [Section (A)-(VI) Tubewell, Item No.- 2(b) Note of PWD Schedule] (Where no lowering of pipe is involved the corresponding rate would be reduced by 30%). ii) 80 mm dia |
| 2 | Supply of PVC pipes & fittings Schedule 40 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).Make Supreme / Skiper/Oriplast. ii) 80 mm dia |
| 3 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. i) 800 dia |
| 4 | Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).i) 32 mm dia make Oriplast/supreme/Asirbad. |
| 5 | Supplying 1 HP submersible pump & mortor with control panel board single phase (220 volt) mode of starting Dol head 48 mtr, 12 stage make CRI/KSB/Pluga or approved make. (Rate considered as per previous vetted scheme) No other make will be allowed. |
| 6 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm. to 5 mm. or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. |
| 7 | Solvent cement & Havac for joining pipes. |
| 8 | Washing and developing tube well with air compressor pump & engine for 8 (eight) hours continious pumping with necessary arrangement for testing the yeild in gallons per hour with \"V\" Notch including hire and labour charges for all tools and plants and scaffolding as reqiured complete. |
| 9 | Supplying fitting & fixing M.S socket ring 100/80 mm. dia. G.I.necessary nuts and bolts of extra heavy. |
| 10 | Supplying fitting & fixing 100/80 mm dia. G.I. Cap at top. |
| 11 | Supplying fitting and fixing 75/80mm. dia. Steel Cutter piece upto 450mm. long with sockets. |
| 12 | Supplying and fixing 1.1 KV grade 2.5 sqmm 3 core copper cable for Submersible Pump-Motor set. Make - Finolex / Havells. |
| 13 | 32 Amps main switch 2 pole MCB make Havels, Flora (Market rate) |
| 14 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges and fees, testing etc. complete in all respect as per direction. charges for tools and plants and sterilising the equipments, paying all |
| 15 | 4\"x4\" in size plate form with 6\" sand filling with 5 \" brick partion wall surrounding the plate form with neat cement punning.( 1 no for pump & 4 nos water tap) ( plateform estimate attached). |
| 16 | Post card size colour photo in three stage |
| 17 | PVC gate valve 32 mm dia (market rate) |
| 18 | 600 mm x 450 mm size GI iron box with front door and locking arrangement including one coat primer with two coats synthethatic enameled pain on all steel surface.with necessary synthetic enamaled paint letter writting on steel box.lum sum |
| 19 | Digging earth in any soil including mixed soil but excluding moorum, laterite sand stone or any other hard stone includingspreading or stacking the spoils within a lead of 75 metres asdirected bailing out water upto 1 metre depth, shoring etc.,when and if required and back filling with fine sand (includingcost of sand) on completion of steining works. |
| 20 | R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction.a) 65 mm thick and 0.9 metre internal dia. |
| 21 | Supplying, fitting and fixing PVC pipes for underground work ofapproved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). withall necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials ,jointing materials, cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sortsof soil and refilling the same as directed complete in all respect. (Paymentwill be made on the centre line measurement of the total pipe lineincluding all specials No separate payment will be made for accessories,specials.) ii)20 mm dia |
| 22 | iii)25 mm dia |
| 23 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work. i) 15 mm dia |
| 24 | ii)20 mm dia |
| 25 | iii)25 mm dia |
| 26 | Supplying P.V.C. water storage tank of approved quality with closed topCapacity 1000 litrs |
| 27 | Labour for hoisting plastic water storage tank. |
| 28 | Nipple (100 mm long) for water tank i) 20 mm dia |
| 29 | Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) |
| 30 | Supplying, fitting and fixing stainless steel sink complete with wastefittings and two coats of painting of C.I. brackets.i) 530 mm X 430 mm x 180 mm |
| 31 | Add GST @ 18% |
| 32 | Add cess @ 1% |
AI Tender Summary
Tender Timeline
Apr 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender