Tender For District Panchayath Deposit Work- ( Sc ) -Mwss To Mariyathodiward No.13 - Karadikunnu Colony In Chalavara Grama Panchayth – Pipe Line & Motor Pump Set Work
Tender Overview
Project Description
District Panchayath Deposit Work- ( Sc ) -Mwss To Mariyathodiward No.13 - Karadikunnu Colony In Chalavara Grama Panchayth – Pipe Line & Motor Pump Set Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Apr-2023 | Tender Extension | Date | 06-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Construction of prefabricated Pump house |
| 2 | Supply and errection of Pre fabricated ferro cement Pump house having an internal measurment1.50x1.50 mtr with 4 Nos. of ferrow cement column size 15x15 cm for fixing Door.The column height 169 cm above ground level .The side wall with ferro cement slab 5 cm thick using ferro cement slab 2.5 cm laid one over another .The ridge piece and purlins with 10x7 cm size with Ferro cement .The column fixed in necessary Foundation concrete in an average depth 45 cm or as per site condition.The side wall height is 169 cm and 210 cm at centre.The door is provided with GI sheet,GI angle and plate with a size of 60x169 cm flooring with CC block with available size and shape including painting with one coat suitable colour paint over a priming coat on GI Door and with necessary locking arrangements. |
| 3 | Lettering with black Japan pint of approved brand and manufacture |
| 4 | Supply and Errection of Submersible Motor pump set |
| 5 | Design, Supplying, erecting ,testing andcommissioning suitable type/make ISI marked vertical type bore well submersible motor pump set with accessories working at 3phase AC main 400/44(+ or -10%) volts of reputed firm suitable for 110/150 mm dia bore well with stainless steel shaft bronze impeller to meet the following requirments. Approximate head of :90 Mtr. Approximate Discharge of :2.50 LPS , with minimum efficiency of 70and with following accessories: T.P.Main switch fuse unit with HRC fuse unit,Capacitor,Supporting clampwith nut & bolt, suitable C.I.Sluice valve and CI Reflex valve (Heavy duty P.N.1.6),Single phase dryrunning preventor,Pressure gauge with stop cock,earthening materials, Ammeter and Volt meter andfluturing pilot lamps,Suitable Pannel board with angle support. Motor should be installed at 70m depth.Warranty 1 year |
| 6 | Supplying suitable copper cable having required core as per IE rules suitable for the above motor pumpset (suitable for 5.0 HP , min 4mm2) |
| 7 | Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work65 mm dia nominal bore |
| 8 | Providing and fixing Light weight, Resistant to abrasion and deterioration, UV light resistant / Minimal elongation,Unaffected by hard water, High strength and shock resistantand soft easy to use with submersible pumps braided Twisted Cord Twine Rope String of 6mm thickness for tagging the submersible motor in position |
| 9 | Laying pumping main & Distribution line |
| 10 | Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 11 | Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock. |
| 12 | Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. |
| 13 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes. |
| 14 | Supply of PVC Pipe, 6kg/cm2, 75mm Dia. |
| 15 | Supply of PVC Pipe, 10kg/cm2, 75mm Dia. |
| 16 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm. |
| 17 | Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve. |
| 18 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore |
| 19 | Supply of PVC specials (3% of the PVC pipe cost) |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender