|
| 1 | Earth work in surface excavation not exceeding 15 cm in Depth ,but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 Metre lead and lift 1.5 Metre. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 20 mm nominal size Recycled Aggregate (RA) ) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%) |
| 4 | Providing and laying 60 mm thick factory made cement concrete paver block of approved shape and colour of M-30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 5 | Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 6 | Providing and Laying of footpath and pavement etc. factory made precast cement concrete slab of size 400x400x50 mm with Mix 30 grade manufactured at an appropriate plant by compacting concrete in joint less steel moulds in two stages of vibration & compression and finished smooth as per shape size and pattern over a base of 12 mm thick (average) cement mortar 1:5 (1 cement : 5 coarse sand) and having joints not exceeding more than 10 mm thick (average) in cement mortar 1:5 (1 cement : 5 coarse sand)neatly finished etc. complete as per direction and instruction of Engineer-in-charge (nothing extra shall be paid to the contractor by laying, slabs in approved pattern and using precast slabs of required shape at the end of footpath) |
| 7 | Laying of footpath and pavement etc. with factory made precast cement concrete slab of size 400x400x50 mmfinished smooth as per shape size and pattern over a base of 12 mm thick (average) cement mortar 1:5 (1 cement : 5 coarse sand) and having joints not exceeding more than 10 mm thick (average) in cement mortar 1:5 (1 cement : 5 coarse sand)neatly finished etc. complete as per direction and instruction of Engineer-in-charge (nothing extra shall be paid to the contractor by laying, slabs in approved pattern and using precast slabs of required shape at the end of footpath) (Length of finished CC Slab edging shall be measured for payment) (Old CC Slab shall be supplied by the deparment free of cost) |
| 8 | Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 9 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost) |
| 10 | Providing and laying DQ stone flooring of size 100x100 mm and 70- 80 mm thick and laid over 20 mm (average) thick base of mix cement mortar 1:6 (1 cement : 6 coarse sand) laid finishing joints with 10 mm thick and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) with and admixture of pigment to match the shade of stone complete as per instruction and pattern approved by Engineer-In-Charge. |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting and unloading the same at any C & D waste management site within 25 kms. lead i.e. Shastri park/ Burari/ Mundka including weighing at plant etc. complete as per direction of Engineer in charge. Weighing and unloading at the plant shall be as per procedures/ rules of the plant management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C & D waste plant. The processing fee of C & D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts. |
