Tender For Construction Of 02 Nos. Toilet And 01 No. Shed At Mahila Thana, Baghmara, Dist. Dhanbad
Tender Value
11.52 Lakhs
Estimated cost
Bid Submission
03 May 2023
0 days left
EMD
23100
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baghmara → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 02 Nos. Toilet And 01 No. Shed At Mahila Thana, Baghmara, Dist. Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Earth in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts, levelling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. (5.1.1 + 5.1.2) |
| 2 | Providing clean coarse sand in filling foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm think with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per specification and direction of E/I. (Mode of measurement compacted volume) (5.1.10) |
| 3 | Providing designation 75B one brick flat soling ----do-----(5.6.3) |
| 4 | Providing P.C.C. M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibration striking curing taxes and direction of E/I.(5.3.1.2) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.3.9.1) |
| 6 | Providing designation 75B brick work inC.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. (5.2.6) |
| 7 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. (5.2.14) |
| 8 | Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. (5.2.23) |
| 9 | Providing and laying DAMP PROOF COURSE 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse (zone-III): 4 graded stone aggregate 20 mm nominal size).(5.3.5) |
| 10 | ProvidingR.C.C. M -200 in band at Lintel level with ……. Do……(5.3.11) |
| 11 | ProvidingR.C.C. M -200 in column with ……. Do…… (5.3.10) |
| 12 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5 % cico or any approved water proofing compound including-----do----- (5.7.14) |
| 13 | Provindingtor steel reinforcement of 8mm to 16 mm diabars cutting, bending and binding with annealed wire with cost of wire removal of roots, placing the rods in postion as per approved design and drawing all coomplete as per direction of E/I. Qty vide item no 5,6,9,10&11 @ 70Kg /m3 (5.5.5 A) |
| 14 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) (5.5.13) |
| 15 | Providing 12mm Cement Plaster(1:6)with clean coarse sand of F.M. 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.(5.7.3) |
| 16 | Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M 1.5 -----do----- (5.7.6) |
| 17 | Providing 1.5mm cement punning including curing, carriageof water with all leads and lefts as per building specification and direction of E/I.(5.7.11) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for. (5.3.17.1) |
| 19 | Lintels, beams, plinth beams, girders, bressumers and cantilevers.(5.3.17.5) |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts.(5.3.17.6) |
| 21 | Weather shade, Chajjas, corbels etc., including edges. )5.3.17.19) |
| 22 | Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. (5.3.17.20) |
| 23 | Providing and laying double cherge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile 600x600 mm(5.6.28) |
| 24 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement motar (1:3)and joined with grey cement slurry with \"A\"grade white 15 X15cm tiles. (5.6.23) |
| 25 | Providing applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth copmlete . (D.S.R.13.26) |
| 26 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. (5.8.18) |
| 27 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (13.47.1) |
| 28 | Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled \"Z\" and mullion steel sections and size as per IS-1038 jointsmet and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.(5.5.18) |
| 29 | Supplying,fitting and fixing M.S.grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage og grill to work site, hoisting as per building specification and direction of E/I.(where materials is not supplied by the deptt.) (5.5.12) |
| 30 | Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. (5.8.45) |
| 31 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. (D.S.R.9.119) |
| 32 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawing30 mm thick plain PVC door shutters. (D.S.R.9.120.1) |
| 33 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50mm and lifts of 1.5 all complete as per specification and direction of E/I. 20% Qty of item 1. (5.1.7) |
| 34 | EARTHFILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)(5.1.8) |
| 35 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (5.3.8) |
| 36 | Making Soak Pit 2.5 m diameter 3.0 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standerd design . (D.S.R.19.32.1) |
| 37 | Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600 x 450 internal diamention having 250mm wall thickness in cementmorter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I.(S.O.R. 3.3.8 ) |
| 38 | Providing 250 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 250 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at the base, the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I. (5.10.33) |
| 39 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. (5.10.34) |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests. (3.2.1C (b) ) |
| 41 | supplying fitting and fixingtowel ringall complete as per specification and direction of E/I.(17.72) |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.(3.2.5) |
| 43 | Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes, having trermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,i/c fixing the pipes with clamp at1.00m spacing.Thisincludes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and making good the same including testing ofd joints completeas per of derection of Engineer in charge. concealed work, including cuttingchases and making good the wall etc.15 mm nominal outer dia pipes. (D.S.R. 18.8.1) |
| 44 | 20 mm nominal outer dia pipes. (D.S.R 18.8.2) |
| 45 | Exposed on Wall 32 mm dia.(18.9.3 (c) ) |
| 46 | Providing and fixing Mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing.(17.32.2) |
| 47 | Providing and fixing PTMT / C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(18.65) |
| 48 | Providing and fixing P.T.M.T. / C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms. (18.75.1) |
| 49 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete. (17.28.2.1) |
| 50 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. (18.52.1) |
| 51 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore.3 (ii) |
| 52 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. (3.1.5.1) |
| 53 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.(D.S.R.12.41.2) |
| 54 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee Without Door 110 mm(D.S.R. 12.42.4.2) |
| 55 | Band 110 mm (D.S.R.12.42.5.2) |
| 56 | Single tee With Door 110 mm (D.S.R.12.42.3.2) |
| 57 | Polythene water storage tank of ISI mark (e.g.sintax/sinter/himgiri/gangotri etc) with cover and locking system(M - 079) |
| 58 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FRPVC insulated copper conductor single corecable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. (1.3.1) |
| 59 | Point Wiring in PVC Conduit, with Piano type Switch, Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc. as required.(1.1.3 Gr. C) |
| 60 | Circuit / Sub-main wiring in PVC Conduit : Wiring for circuit / Sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface / recessed PVC conduit as required. 2 × 2.5 sqmm + 1 × 2.5 sqmm Earth Wire. (1.7.2) |
| 61 | Ceiling fan 1200 mm( M - 772) |
| 62 | S/F Batten / Angle Holder : Supplying and fixing batten / angle holder including connections etc. as required. (1.34) |
| 63 | Providing, fitting, fixing & testing of (Essential) LED Lamp 15/16W LED in existing Battan / Angle Holder (Make – Philips / Bajaj / Crompton / Wipro) (M - 856) |
| 64 | 12\" 300mm metal exaust fan (M - 776) |
| 65 | S/F S.P. MCB DB 6 way , Single door(2.8.3) |
| 66 | Supplying and fixing 6 amps to 32 amps, rating, 240 volts, \"B\" series, maniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required .Single pole (2.11.1) |
| 67 | s/f sheet metal on/off load changeover 32amps 2pole.(2.6.1) |
| 68 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/ recessed PVC coduit as required. 2 x 1.5 sq mm + 1x1.5 sq mm earth wire. (1.7.1) |
| 69 | Carriage of Materials : (i) Sand |
| 70 | (ii) Chips |
| 71 | (iii) Cement |
| 72 | (iv) Steel |
| 73 | (v) Bricks |
| 74 | Goods & Service Tax (G.S.T.) - @18% |
| 75 | Labour Cess - |
AI Tender Summary
Tender Timeline
Apr 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender