Tender For Work Under Summer Plan 2023-24 In The Area Of Eudd-I, Aligarh, aligarh-Uttar Pradesh

Tender For Work Under Summer Plan 2023-24 In The Area Of Eudd-I, Aligarh- 1 Safe Carriage Of Line Material Viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & Other Material From Store Centre, Sarsol To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Respective Ends. 2 Safe Carriage Of 100 Kva Distribution Transformer Fromelectricity Store Centre, Aligarh Or From Any Other Place To The Respective Site Of Work Including Loading & Unloading At The Respective Ends And Mounting On Double Pole Including Proper Jumpering From 11 Kv Line To The Transformer And Also Connecting The Lt Site Cables As Per Resspo Manual. 3 Safe Carriage Of 400 Kva Distribution Transformer Fromelectricity Store Centre, Aligarh Or From Any Other Place To The Respective Site Of Work Including Loading & Unloading At The Respective Ends And Polacement On Plinth Including Proper Jumpering From 11 Kv Line To The Transformer And Also Connecting The Lt Site Cables As Per Resspo Manual. 4 After Opening Of Ht & Lt Connections, Dismantalling Of250 Kva Distribution Transformer From Double Pole And Its Safe Carriage From Respective Site To Store Including Loading & Unloading At Both Ends. 5 Neutral & Body Earthing Of Distribution Transformer By Digging Of Pit Upto Water Level Depth ( Approx. 125 Feet ) And Then Inserting 1-¼” Dia Gi Pipe Of ‘A’ Grade, Conforming To The Requirement Of Is Specification And Then Connecting The Top Of The Inserted Pipe And Transformer Body Through Gi Strip Of Size 40X6 Mm With The Help Of Nut And Bolt Or Through Gas Welding, As Per Direction Of Supervising Engineer. It Includes The Cost Of All Material Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. The Aforesaid Work Shall Be Carried Out As Per Resspo Norms. 6 Construction Of Plinth At Various 11 / 0.4 Kv Sub-Station Suitable For Distribution Transformer Having Size 5’X 5’ X 5’ Out Which 2’ Below The Ground. Work Will Include Digging Of Foundation 2’ Deep & Brick Work With Ist Class Bricks Having Cement And Sand Mortar Of Ratio 1:6 On All The Walls, Each Of 9” Thickness. The Area Inside The Wall Shall Be Duly Filled By Mud Up To The Height Of Appropriate Level From Ground Level And Shall Be Duly Watered & Rammed. Above The Filling C.C. Of Ration 1:6:12 ( Cement Sand And Brick Ballast ) Giving 4” Layer Shall Be Provided. Above C.C. Layer Rcc Layer Having 4” Thickness And With Ratio 1:2:4 Of Cement Sand And Stone Ballast Shall Be Provided Re-Enforcement Shall Be Provided By Providing Net Of ( 8 Nos. + 8 Nos. ) M.S. Rods Of Size 10 Mm Dia And Each Of 5’ Length In The Middle Of The Top Of C.C. Layer. The Plinth Shall Be Plastered With 12Mm Thick Plaster In Ratio 1:4 At All Sides. This Work Will Include Cost Of Labour, T&P And All Material Required For Construction Of Plinth Which Shall Be Provided By The Contractor As Per Resspo Norms. 7 Providing And Fixing Of Welded Wire Mesh Fencing Around Transformer Plinth With M.S. Angle Of Size 35X35x6 Mm. Length And 1.20 Meters Height, Such Panels Shall Be Supported On M.S. Angle From Of Size 40X40x6 Mm. Having 04 Nos. Corner Supports Of Height 1.65 Meters Including Extended Legs For Grouting Which Will Be Used As A Door For Entry Of The Personnel Or Removal / Shifting Of Transformer With Welded Hinges, Sliding Belt Etc. For Locking The Arrangement As Per Drawing And Specifications The Fencing Will Be Painted One Coat Of Red Oxide Primer And Then Two Coats Of Bus Green Synthetic Enamel Paint. The Rates Should Be Inclusive Of All Materials Required For Proper Completion Of Above Work ( Length Of Each Fencing Approx. 11 Meters ) 8 Laying Spreading, Lifting And Final Sagging Of Aerial Bunched Cable Size3x95+1X70+1X16 Sq.Mm. Including Fixing Of All Accessories As Per Resspo Manual And As Per Direction Of Supervising Engineer, Including The Cost Of Arrangement Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work. : 9 Fixing & Connecting Of Earthing Rods As Per Resspo Manual Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. 10 Fixing Of Lt Distribution Box Including Making Connections Of Distribution Box With Lt Mains By Piercing Clamps For Aerial Bunched Cable.The Work Will Also Include The Opening Of The Service Connection Of The Consumer And Its Connecting In Distribution Box. 11 Erection And Grouting Of Stay Set Including The Work Of Nozzling Etc. As Per Respo Manual And Also Including The Cost Of Arrangement Of All Grouting Material, Labour, T&P Etc. Required For Proper Completion Of Work As Per Resspo Manual. 12 Fabrication Of Base Angle As Per Resspo Norms. 13 Safe Carriage Ofof 11 Kv Xlpe Cable 3X185 Sq.Mm. From Store To Site Including Loading & Unloading At Both Ends. 14 Laying Of 11 Kv Xlpe Cable 3X185 Sq.Mm. Including Making Proper Connections At Both Ends. The Work Includes The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. 15 Providing 3X70sq.Mm. 11 Kv Cable Jointing Kit Size 3X185sq.Mm. ( O / D & I / D ) And Its Filling As Per Resspo Norms. 16 Carriage Of Tailless Unit From Esc, Aligarh To Site And Its Installation As Per Resspo Norms.

INR 1180 /-

INR 5000.0 /-

Refer document