Military Engineer Services-MES has published Tender For Special Repairs To H Block At Abe Park And Provision Of Aluminum Partition At Cqae Under Age Br Ii Of Ge Nd Visakhapatnam. Submission Date for this Tender is 19-05-2023. Aluminium Furniture Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-May-2023 | Corrigendum to BOQ | BOQ | 12-05-2023 |
| 2 | 12-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-05-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of cement concrete in ground floors and pavings not exceeding 15cm thick above or below ground level complete all as specified and directed. |
| 3 | M & L for 25 mm thick PCC 1:2:4, type B-O, using 12.5mm graded crushed stone aggregate finished fair and even to receive Tiles complete all as specified and directed. |
| 4 | S&F for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed. |
| 5 | S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and directed. |
| 6 | M&L Glazed ceramic tiles in vertical surfaces of size 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including15 mm thick screed bed or bedding layer of cement mortar 1:4 for backing finishes complete all as specified and as directed. |
| 7 | M&L for Granite (of any type) tiles 16 -18 mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement sand mortar 1:4 complete all as specifed and directed by EIC. |
| 8 | M&L for Non - skid coloured ceramic tiles in vertical surfaces , 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in staircase etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thickrenderingin CM (1:4) as rough surface on vertical surfaces as backing coat of wall tiles complete all as specified and as directed. |
| 9 | Taking down ventilators of any type not exc 1 Sqm each complete all as specified and as directed. |
| 10 | Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 11 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4.0 sqm each complete all as specified and as directed. |
| 12 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate for fixing hold fast, coping, cills and filling in pressed steeldoor frames including necessaryform work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 13 | S & F 2nd classfactory made hard woodas inplain straight chowkats and frames, wrought, framed, rebeared on the solid, rounded or chamfered, but together with glue pinned at joints, etc complete all as specified and as directed. |
| 14 | M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 15 | S & F 35 mm thick factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sideskiln seasoned and chemically pressure treated including door stopper 150mm long, complete all as specified and directed . |
| 16 | S & F 35 mm thick factory made 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed. |
| 17 | Supply & fixing for frosted glass / tinted glass 4.80 mm thick glazing in aluminium frames and ms pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed. |
| 18 | Supply & fixing Sheet glass 4mm thick,ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in eachinculding hacking out old broken glass complete all as specified and directed. |
| 19 | S & F forStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 21 | S&F for anodised three track aluminim sliding window and vendiletor frame made up 62 mm X29.5mm X1.5 mm thick aluminium section & shutter made of section 38mm X20mm X 1.5mm thick without sash bar aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised aluminium fittings ,suitable aluminium handle and locking arrangment etc complete all as specified and directed |
| 22 | Supply only Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 20 X 12 X 1.5mm for fixing Deco Grill complete all as specified and as directed. |
| 23 | S&F for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 24 | S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm woodgrain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm wood grain colour PVC Sheet on back face complete all as specified and directed. |
| 25 | S & F drapery rods (curtain rods) of 25 mm outer diameter, designed on electric resistance welded mild steel pipe having a corrugated virgin PVC extrusions reinforced to minimize friction and eliminate scratches with colour matching brackets and finials etc. of approved colour /shade/design wherever necessary with anchoring arrangements complete all as specified and as directed. |
| 26 | S&F for Mild steelbutt hinges of 100 mm size cold rolledmedium weight, ISI marked complete all as specified and directed. |
| 27 | S&F in repairs Mild steelbutt hinges of 100 mm size cold rolled medium weight, ISI marked complete all as specified and directed. |
| 28 | Supply and fixing in 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 29 | Supply and fixingin repairs 200mm size mild steel barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed. |
| 30 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 31 | Supply and fixing in repairs150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 32 | S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 33 | S & F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 34 | S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 35 | S & Fin repairs 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 36 | S&F for strainless steelbutt hinges 75 mm long medium weight, cold rolled stainless steel complete all as specified and directed. |
| 37 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 38 | S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 39 | Dismantling boarding any description fixed in any position complete all as specified and directed. |
| 40 | S & F solid WPC/PVC door frame of size 50mm X 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed. |
| 41 | S&F 18mm thick one side decorative lamination & other side balancing lamination sheet considering of carcass 18mm thick PVC/WPC sheet & provn of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification as approved by GE. |
| 42 | S&F 18mm thick PVC solid board plain for PVC/WPC shelf/partition one side decorative laminated PVC sheet all requried brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the dges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing and specification approved by GE. |
| 43 | S & F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified and directed |
| 44 | S&F for 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified and directed. |
| 45 | S&Fin repairs 100 mm size hasp and staple , mild steel wire type stove enamelled black, including bolt to hinge plats and fixed with screws ete complete all as specified and direted. |
| 46 | Demolition Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and as directed. |
| 47 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6complete all as specified and as directed. |
| 48 | M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed |
| 49 | Demolition of reinforced cement concretein any position not otherwise specifically provided including cutting of reinforcement if required complete all as specified and directed. |
| 50 | S&F for mild steelTMT bars 10mm dia and above cut to length bend to shape required including cranking bending spirally for hooking ends and bindingwith and includingmild steel wire not less than 0.90mm dia complete all as specified and directed. |
| 51 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etcalso splays between floors and beams, etc for rough finished surface complete all as specified and directed |
| 52 | M & L for RCC 1:11/2:3 type A-1,(using 20mm graded crushed stone aggregate) as in slab supported on walls, Beams, cantilevers, bressummers,lintels over 1.5m span etc. complete all as specified and directed. |
| 53 | Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etc complete all as specified and directed. |
| 54 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 55 | M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4)Mixed with water proofing compound @ 3% complete all as specified and directed. Note :Water proofing compound shall be measured and paid separately) |
| 56 | Supply only integral water proofing compound complete all as specified and directed. |
| 57 | M&L for rendering 5 mm thick in CM (1:3) on ceiling sufaces, finished even & smooth without using extra cement, complete all as specified and directed. |
| 58 | prepration of newly plastered wall surfacesby using vaccume basedhand held or long handle sander machine and applying two coats ofdistemper oil emulsion (Oil bound washable distemper)over and including 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces by using auto roller or airless sprayer machine complete all as specified and directed. |
| 59 | Complete removal of existing treatment and prepration of old decorated wall surfacesby using vaccume basedhand held or long handle sander machine and applying two coats ofdistemper oil emulsion (Oil bound washable distemper)over and including 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces by using auto roller or airless sprayer machine complete all as specified and directed. |
| 60 | prepration of newly plastered ceilingsurfacesby using vaccume basedhand held or long handle sander machine and applying three coats of white wash by using auto roller, complete all as specified and directed |
| 61 | prepration of old decorated ceilingsurfacesby using vaccume basedhand held or long handle sander machine and applying one coat of white wash by using auto roller, complete all as specified and directed |
| 62 | prepration of old decorated wallsurfacesby using vaccume basedhand held or long handle sander machine and applying one coat of white wash by using auto roller, complete all as specified and directed |
| 63 | complete removal of existing treatment andPrepration of old wall surfaceby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washerand applying one coat of cement based paint by using auto roller or airless sprayer machinecomplete all as specified and directed |
| 64 | Prepration of newly plastered wall surfaceby using vaccume basedhand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of cement based paint by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed |
| 65 | M & L for preparation new or prevously untreated surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer using auto roller or airless sprayer machine complete all as specified and directed. |
| 66 | M & L for preparation of old painted wooden surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint using Auto roller or airless sprayer machine complete all as specied and directed. |
| 67 | Removing the existing roof treatment completely and roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc then Brushing neat cement slurry with 3 Kg of cement per Sqm,then Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @ 3% of weight of cement and finished even and fairwithout using extra cement then supplying testing andapplying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced applicationincluding coating the APP membrane surface with water based bituminous primerof blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance (Three layers of bitumen primer one on plastered surface and two on APP membrane) and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and directed. Notes:- (a)The Roof treatment work shall be carried out through the original manufacturer or his authorized applicator only , Contractor will have to submit all necessary documents like Purchase Vouchers, test Certificates, Authorization letter of manufacturer,etc before payment of RAR. (b) Contractor will have to submit a written guaranteefor water proofing treatment for a period of10 years on a stamp paper of Rs 100 . (c) Contractor will have to deposit a FDR for a Sum equal to 3% of Total Cost of water proofing Treatment before issue of final completion of work failing which the sum shall be deducted from his RARs/Final Bill. |
| 68 | M & L for Cutting / Chipping the spalled loose concrete of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Zinc rich epoxy primer to all steel surfaces as antirust agent and welding steel wire Fabric / Mesh of aperture 75mm and 2mm dia of wire to existing reinforcement, applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd as per manufacturer"s instructions and providing pressure Guniting up to 40 mm andaveraging 25mm thick at a pressure of not less than 6 KG / Sqcm in CM 1:3 duly mixing the mortar with and including polycrete admixture of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 2% of weight of cement, finishing the surface rough and finally rendering with 15 mm thick in CM 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics to match with the existing surface including providing double scaffolding and safety measures as required and removal of the same on completion and disposal of demolished materials / debris outside MD land complete all as specified and as directed. Note:-The work will be carried out throughauthorized manufacturer and contractor will have to submit all necessary documents for the same |
| 69 | Demolition of cement concrete in Sunken floors and provision of75 mm thick PCC (1:1 1/2:3) type A-O using 12.50 mm graded crushedstone aggregate with and includingintegral water proofing compound as per manufacturer instructions on bottom of sunken portion withproper slope towards spout and providing15 mm thick plastering on vertical sides in CM (1:3)mixed with and includingwater proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green ie . PCC & Plaster be carried out at the same time , Applying two coats of Dr fixit epoxy compound(or equivalent in other makes as given in list of makes )after laying sewage / plumbing pipes with fixtures in position and fillingthe sunken floor with 50 mm thick PCC( 1:5:10) type E-2 using crushed stone aggregate over the treated surfaceincludingprovision of Spouts of50mm dia GI pipe light grade projecting 450mm clear of face outer wall with mosquito proof cap on inner face of pipe to drain out seepage water ,including cutting holes and making good if needed complete all as specified and directed. NOTE:- The water Proofing treatment shall be tested after application of Dr fixit epoxy compound and before filling of PCC 1:5:10 by filling the same with water and testing continuously for 72 hours for any leakage and dampness etc and further work shall be allowed only after successful testing in presence of Engineer-in-charge |
| 70 | S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) EWC white complete including seat and cover, flush pipe including all joints complete all as specified and directed. |
| 71 | S&Fin repairs WC squatting pan "Orissa pattern" of side 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and flush pipes etc and flush pipes etc and cement concrete bedding in PCC 1:2:4 type B1including "P" OR "S" trap completeall as specified and directed. |
| 72 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. |
| 73 | S&F in repairs 32 mm dia discharge pipe andwaste coupling of PTMT (60 gm weight) (half or full threaded) complete all as specified and directed . |
| 74 | S & F in repairs 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 75 | S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed . |
| 76 | S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 77 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 78 | S&F in repairs stainless steel Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 79 | S & F in repairs CP over headshower rose (ABS crome plated) with revolving joints & 100 mm long swivel shower arm, any size, including fixing tosteel pipe or union complete all as specified and directed |
| 80 | S&F in repairsPVC 10 litres capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed. |
| 81 | S&F in repairs 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete all as specified and directed |
| 82 | S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed. |
| 83 | S&Frotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tanks complete all as specified and directed |
| 84 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed. |
| 85 | S&F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed |
| 86 | S&F in repairs stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or includingfixing cantilever brackets and over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm completeas specified and directed. |
| 87 | S&F 32mm PVC pipe for waste fitting,brass , CP for glazed ware sinks,basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixe dcomplete all as specified and directed. |
| 88 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified andasdirected. |
| 89 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified andasdirected. |
| 90 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified andasdirected. |
| 91 | Supply, laying and testing for 16mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. |
| 92 | Supply,laying and testing for20mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. |
| 93 | Supply, laying and testing for25mm dia CPVC pipe SDR11 and plain CPVC SDR11 brass fittings, (ISI Marked), concealed or fixed complete to wall, ceiling or laid in floors complete all as specified and directed. |
| 94 | Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) complete all as specified and directed . |
| 95 | S&F 110 mm dia PVC (SWR) pipes single socketed , in any length ,with rubber ring and joints fixed in walls complete all as specified and directed. |
| 96 | S&F 110 mm dia bore PVC (SWR)bends complete all as specified and directed . |
| 97 | S&F 110 mm PVC (SWR) junction single (Single T) equal or unequal with access doors complete all as specified and directed. |
| 98 | S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed |
| 99 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / ceiling or laid in floor complete all as specified and directed |
| 100 | S&F 75 mm dia of PVC floor trapplain with grating including jointing with solvent cement of outlet complete all as specified and directed. |
| 101 | S&F75 mm size PVC (SWR) bends any radius complete all as specified and directed |
| 102 | S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access doors complete all as specified and directed. |
| 103 | M&L forPlain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate)as in mass-concrete and foundation complete all as specified and directed. |
| 104 | M&L for 75 mm thickplain cement concrete 1:3:6 type C-2 using 40 mm graded crushedstone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen joint filler and sand 1:3 by weight of grade "A"complete with and including necessary form work etc complete all as specified and as directed. |
| 105 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever equired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 106 | Removing debris/unservicablematerial to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a pointnot heigher than 1.5 m of the starting point complete all as specified and directed. |
| 107 | S&F for Anodised aluminium partition (Area of eachpanel not exceeding 1.5 Sqm each) with frame made of aluminium section of 63.5x38.1x1.5 mm size fixed with and including necessary jointing cleats , glazing clips, rubber neoprene packing , anodised aluminium snap beading, screws, including 12 mm thick prelaminated particle board, exterior grade , prelaminated both sides with decorative choice laminate fixed with screws to aluminium frame work complete all as specified and directed. |
| 108 | Material and labour in repairs for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm PVC conduit totally concealed/surface conduit in walls/ceiling with tee , bend, elbows, junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including not less than 1.0mm thick prefabricated galvanised boxes with white modular cover plate of suitable size for fixing modular switches, sockets, regulator and connected the earth wire to common earth dollyforOne light/fan point/bell point controlled by one switch including taking down the existing old wiring of any description and type complete all as specified and as directed.Note:-(i) Thequoted rate shall includes all the cost of cutting, chasing, cementing work and makingall the disturbed surfaces of wall / ceiling good to match the existing wall / ceiling along with same colour. |
| 109 | Description all as per item No. 108 above but for 05 Amp switch socket out let,on same board complete all as specified and directed |
| 110 | Description all as per item No. 108 above but for 05 Amp switch socket out let,on independent board complete all as specified and directed |
| 111 | Description all as per item No. 108 above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified and directed |
| 112 | S & F Modular switch 1 way 6A, 1 module single polecomplete all as specified and directed . |
| 113 | S & F Modular switch 1 way 16A, 1 module single polecomplete all as specified and directed . |
| 114 | S & F ceiling rose surface bakelite 65 x 30mm with 3 terminals complete all as specified and directed . |
| 115 | S & F Socket, 6A - 2/3 pin combined 2 module, 230 volt,multipurpose, complete all as specified and directed |
| 116 | S & F Socket 15A/16A - 2/3 pin combined 2 module,230 volt,multipurpose,complete all as specified and directed |
| 117 | S & F modular Fan step regulator, 120W - 2 modulecomplete all as specified and directed. |
| 118 | S&FModular Bell push, 5 Amps complete all as specified and directed |
| 119 | S&F Calling Bell Ding dong, AC 230 volts single pole complete all as specified and directed |
| 120 | S&F TV Cable Sockets1 moduleincluding modular terminal boxes 1 way including necessary 20mm PVC pipe complete all as specified and directed. |
| 121 | S & F 4 feet long LED batten tube light fittings, retro bar professional WH 5700K to 6200K and minimum 1800 lumens (18-20 Watt) of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed |
| 122 | S & F 2 feet long LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 900 lumens (9 Watt) of cool white / warm comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed by the Engineer-in-Charge. |
| 123 | S & F in repairs Building Security light LED type of minimum 3500 Lumens (35 W) Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed |
| 124 | S & F in repairs LED bulb non dimmable pin / thread type 9 watts with holder pin/thread typecomplete all as specified and as directed |
| 125 | S & F of metallic exhaust fan of sweep 300mm Heavy duty along with metallic louver complete includingcutting of wall, making of proper hole sufficient to fix exhaust fan and smoothing of the surface before fixing of exhaust fan complete all as specified and directed |
| 126 | Taking down ceiling fan of any size from its position anddoing complete overhauling of fan including replacement of fan clamp , split pin, rubber bush, 02 no canopy , fan capacitor of 2.5mfd, bearings and other spares including painting with twocoats of synthetic enamel paint over a paint of primer refixing the same after repairs complete all as specified and directed .. |
| 127 | Rewinding of ceiling fan motor ofany type sweep & any make,with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, replacing the bearings of suitabe, etc.complete all as specified and directed |
| 128 | Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN MCCB DBs double door (Fixed flush to the wall), with and including provision of 4P, 16 KA, 100 Amps, 415 Volts MCCB as incommer & outgoing as TPN 415 volt,4 Way, IP-43 protection with 200 Amp rated bus bar and 4.0Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s including taking downold DB box of any type and making good with use of Bricks, PCC, Cement etc and matching with existing surface, complete all as specified. Note :- MCCB 4 Pole, 100 Amps, 50 Hz, 16KA, 415 Volts is included in quoted rate. |
| 129 | Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall) Double door, SPN, 240 volt,12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s including taking downold DB box of any type and making good with use of Bricks, PCC 1:2:4, Cement mortar 1:4 etc and matching with existing surface , complete all as specified and directed. |
| 130 | Supply and fixing in repair of Factory made sheet metal enclosure for DBs (Fixed flush to the wall) Double door, SPN, 240 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s including taking down old DB box of any type and making good with use of Bricks, PCC 1:2:4, Cement Mortar 1:4 etc and matching with existing surface, complete all as specified and directed. |
| 131 | Supply and fixingof MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA "C" series,complete all as specified and directed |
| 132 | Supply and fixing ofMCB 63Amp, 415 Volt, TP/TPN, breaking capacity 10 KA "C" series, , complete all as specified and directed |
| 133 | Supply and fixingof MCB 40-63 Amp, 240 Volt, SPN, breaking capacity 10 KA "C" series, , complete all as specified and directed |
| 134 | Supply and fixingof RCBO DP 30mA, 40A to 63A, 230 Volt, complete all as specified and directed. |
| 135 | M&L for sub main wiring withtwo run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt,and onerun of copper earth wire 6.0 Sq mm drawn through PVC concealed/surface conduict of 25 mm dia, including taking down unsv sub main wiring of any type, complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduictshall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rates. |
| 136 | Supply laying and testing of cable in trenches ,walls ,XLPE insulated, armoured electric cable heavy duty 1100 volt grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed. |
| 137 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laying of cable complete all as specified and directed. |
| 138 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed |
| 139 | Removing excavated surplus soils and material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 140 | Material and labour fornatural river sand as cushioning of cables 23 cm thick , including spreading and punning downto 18 cm thickness complete all as specifiedand directed . Note : punned thickness only shall be measured for payment purpose |
| 141 | Supply and laying in trenches un-reinforced pre cast concrete cable cover class LV,type I, flat size 250x150x40 mm complete all asspecified & directed |
| 142 | M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber,CI frame with CI 10mm thick cover,20mm dia GI medium grade pipe for watering , and water funnel with wirw mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion. |
| 143 | M&L for 4mm galvanised iron earth wirefor earthing connection to building including all fittings, complete all as specified and directed. |
| 144 | Taking down Electric Meter and refixing it with new PVC Meter box for fixing of electrical KWH meter any type complete all as directed MAKE-Sintex or equivalent |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
