Military Engineer Services-MES has published Tender For Repairs And Re-Clothing Of Sofa, Dinning Chairs, Executive Chairs Etc And Polishing, Painting And Recanning Of Md Accn Furnitures At Bso Furniture Yard Under Ge ( North ) Bangalore.. Submission Date for this Tender is 10-05-2023. Painting Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Apr-2023 | 8374Corrigendum | BOQ | 10-05-2023 |
| Sl. No. | Item Description |
| 1 | Sofa Set 3/4/5 Seats FD 281/373 /FD/MAP-II/02 Supply and fixing of the following new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak wood including titning other parts with scew/bamboo pins only of the sofa complete all as specified in drawing & directed by Engineer-in-charge. a) Front legs for three/single seater sofa |
| 2 | As per item No. 1 above but for Rear legs for three/single seater sofa |
| 3 | As per item No. 1 above but for Long front & Back rail for three seater sofa |
| 4 | As per item No. 1 above but for Long front & Back rail for single seater sofa |
| 5 | As per item No. 1 above but for Stiffner for three/single seater sofa |
| 6 | As per item No. 1 above but for Side short rail for three/single seater sofa |
| 7 | As per item No. 1 above but for Arms rest for three /single seater sofa. |
| 8 | As per item No. 1 above but for Plywood 10mm for three seater sofa. |
| 9 | As per item No. 1 above but for Plywood 10mm for single seater sofa. |
| 10 | As per item No. 1 above but Removal of unserviceable seat and back tapestry cloth and unsv cushion of sofa set three seater and supply and fixing with new cushion 550mm x530mm x100mm thick of 32 Density duly covered with well finished best quality tapestry cloth (250 GSM) of approved make/shade including providing quality ZIP all as specified and shown on drawing and directed by Engr-in-charge |
| 11 | As per item No. 10 above but for replacing cushion and tapestry cloth for Sofa set 4 seater |
| 12 | As per item No. 10 above but for replacing cushion and tapestry cloth for Sofa set 5 seater |
| 13 | As per item No. 1 above but for Removal of unserviseable replacing tapestry cloth from seat and back of Sofa set Three seater providing new tapestry cloth of 250GSM of approved make/shade duly providing quality Zip all asper specified and directed by Engr-in-charge |
| 14 | As per item No. 13 above but for replacing cushion and tapestry cloth for Sofa set 4 seater |
| 15 | As per item No. 13 above but for replacing cushion and tapestry cloth for Sofa set 5 seater |
| 16 | Sofa Set 5 Seater (TP) :- Removal of unserviceable seat and back rexine cloth/ taperstry cloth (180 GSM) and cushion of Sofa set 5 seater and S & F with new cushion 100mm thick of polyurethane foamdensity 40 Kg/ Cum (40 density) Make of foam Dunlop / sleepwell covered with new fabric of acrylic / polyester / polypropyleneof rexine cloth / new tapestry clothof approved make / shade duly providing quality all as specified and shown in drawing and as directed by Engr-in-charge |
| 17 | As per item No. 16 above but for Sofa set singleseater |
| 18 | Chair Dinning Cushioned Long Back (FD-357) Supply and fixing of the following new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak wood including titning other parts with scew/bamboo pins only of the Chair dining Cushioned long back complete all as specified in drawing & directed by Engineer-in-charge. a) Front legs |
| 19 | As per item No. 18 above but Rear legs incl back frame |
| 20 | As per item No. 18 above but Front & Back rail |
| 21 | As per item No. 18 above but Side rail |
| 22 | As per item No. 18 above but for S & F second class hard wood corner/ bracket L shape of size 50 x 50 x 20mm thick fitted with screw between side rail to leg. |
| 23 | As per item No. 16 above but for Removal of existing unserviceable seat cushion along with tapestry cloth 180 GSM of Chair Dining long back and provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge |
| 24 | As per item No. 23 above but Back |
| 25 | Chair Easy Cushioned (FD-358) Supply and fixing of the following new parts after removingbroken/unserviceable parts of well seasoned teak wood including tighting other parts with screw/bamboo pins only of the Chair Easy Cushioned complete all as specified in drawing & directed by Engineer-in-charge. a) Front leg |
| 26 | As per item No. 25 above but Rear leg incl back frame |
| 27 | As per item No. 25 above but Front & Back rail |
| 28 | As per item No. 25 above but Side rail |
| 29 | As per item No. 25 above but Removal of existing unserviceable seat & back cushion along with tapestry cloth/ Rexine cloth 180 GSM of Chair Easy cushionedand provision of new seat & backfoam cushion 75mm thick of 32 density with new tapestry cloth / New rexine clothof approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge |
| 30 | Stool Derssing with Cushioned (FD/E6/MAP/14 ) Supply and fixing of the following new parts after removingbroken / unserviceable parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the Chair Easy Cushioned complete all as specified in drawing & directed by Engineer-in-charge. a) Leg |
| 31 | As per item No. 30 above but Side rail |
| 32 | As per item No. 30 above but Stiffner |
| 33 | As per item No. 30 above but Removal of existing unserviceable seat cushion with tapestry cloth/ Rexine cloth 180 GSM of Stool dressingwith cushionedand provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth/ New Rexine cloth of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge |
| 34 | Chair Dinning MAP Officer (FD/MAP-II/04) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw only of the chair complete all as specified in drawing directed by Engr-in-Charge. a) Rear leg |
| 35 | As per item No. 34 above but Front Leg |
| 36 | As per item No. 34 above but Seat frame side rail |
| 37 | As per item No. 34 above but Seat frame front and back rail |
| 38 | As per item No. 34 above but Stiffner |
| 39 | As per item No. 34 above but Back rest, Side & middle stiffner |
| 40 | As per item No. 34 above but S & F second class hard wood corner/ bracket L shape of size 50 x 50 x 20mm thick fitted with screw between side rail to leg. |
| 41 | As per item No. 34 above but Removal of existing unserviceable seat cushion with tapestry cloth of Chair dining officer (MAP) and provision of new seat foam cushion 75mm thick of 32 density with new tapestry cloth not less than Rs 250/- meter of approved make/shade fixed on 12mm thick commercial plywoodall as per drawing and as directed byEngineer-in-Charge |
| 42 | As per item No. 34 above but for Removal of existing UNSV seat tapestry cloth of chair Dining (MAP) officer and provision of New seat cloth with well finished best quality tapestry cloth not less than Rs 250/- meter shade and quality shall be approved by Engr-in-charge |
| 43 | Chair Computer/All type Revolving Chair/ sorts of Chair Revolving High Back (FD/E6/MAP/01 & TP) M & L Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat and back of all type revolving chair including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood and PVC beading around the seat& back complete all as specified and as directed. |
| 44 | As per item No. 43 above but for Removing of existing oldTapestry/Fabric cloth onlyfor seat and back of all type revolving chairs andprovision of New seat and back of cloth with well finished best quality Tapestry/Fabric cloth not less than Rs 250/- per meter shade and quality including PVC beading around the seat and back complete as directed by Engr-in-charge |
| 45 | As per item No. 43 above but for M & L bottom base with steelness steel frame including twin castor wheel each chair five Nos (as approved) of all type revolving chair including taking out unserviceable bottom base with twin castor Wheel from Chairs, complete all as specified and as directed. |
| 46 | As per item No. 43 above but for M & L twin castor wheel only (as approved) of all type revolving chair including taking out unserviceable twin castor wheel only from Chairs complete all as specified and as directed. |
| 47 | As per item No. 43 above but for M & L Gas lifting hydraulic system of chair all type of revolving chairs taking out unserviceable Gas Lifting hydraulic System from Chairs complete all as specified and as directed. |
| 48 | As per item No. 43 above but for M&L soft handle of all type revolving chair as per existing including taking out unserviceable handle from Chairs complete all as specified and as directed. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost ofall type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate. |
| 49 | Chair Writing MAP Steel (FD/E6/ MAP/12) S & F Tapestry / Fabric cloth over sythetic foam 25mm thick (as approved) for seat and back with hot pressed 12mm Plywood of chair writing including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood including PVC beading around the seat and back complete as directed by Engr-in-charge. |
| 50 | As per item No. 49 above but for Removing of exissting oldTapestry/Fabric cloth onlyfor seat and back of all type of chair writting MAP steel andprovision of New seat and back of cloth with well finished best quality Tapestry/Fabric cloth not less than Rs 250/- per meter shade and quality including PVC beading around the seat and back complete as directed by Engr-in-charge |
| 51 | As per item No. 49 above but for S & F soft handle of chair writing including taking out unserviceable handle from Chair including welding of broken joints and painting of steel frame surface of the chair with one coat of synthetic enamel of black shade complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost ofall type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate. |
| 52 | Chair Moulded Plastic with arms supreme Ornate (TP) Removing old unserviceable seat of chair and S &F complete new seat supply by company made of standard manufacturesmake supreme model ornate red colour (approved best quality) to be fited with nut and bolts of required size complete all as specified and as directed. |
| 53 | As per item No. 52 above but for Back of chair |
| 54 | Charpoy IP with ply top JCO"s /OR"s FD/MAP-II/01 & CWE/FD-05/ CWE/FD-77 Removing of unserviceable ply wood from all type charpoy IP andfixing the new 12mm thick 7 ply,commercial type,BWR exterior grade (water proof), of size 1980 mm x 900 mm fixed on topwith mild steel galvanized iron nuts & bolts with GI washer (Heavy weight) and including tightening with electric welding of loose long rail /short rail, legs, centre stiffner, Head rest and cleat of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surfaces with provding 04 Nos new hard rubber shoes to each charpoy at the bottom of legs after removing of old shoes complete all as specified and as directed by Engineer-in-charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost ofall type nut bolts and washers, PVC shoes and painting of the all type charpoy IP to be included in the quoted rate. |
| 55 | Bed Hard officer Steel (FD/E6/MAP 08 (R) Removing of unserviceable ply wood from Bed hard officer steel and fixing the new 12mm thick, 7 ply,commercial type,BWR, exterior grade (water proof), of size 1980 mm x 900 mm fixed on topwith mild steel galvanized iron nuts & bolts with GI washer (Heavy weight) and including tightening with electric welding of loose long rail short rail, legs centre stiffender, Head rest, Foot rest and cleat of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surfaces with provding 04 Nos new hard rubber shoes to each Bed hard with steel frame at the bottom of legs after removing of old shoes complete all as specified and as directed by Engineer-in-charge. |
| 56 | As per item No. 55 above but for Removing of UNSV head rest and supplyof new head rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge. |
| 57 | As per item No. 55 above but for S&F of new Foot rest made of pre-laminated particle board 18mm thick both side teak face of exterior grade with 04mm thick teak wood beading shall be provided all-round including screws and welding of cleat all as specified in drawing directed by Eng-in-Charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost ofall type nut bolts and washers, PVC shoes and painting of the Bed hard steel to be included in the quoted rate. |
| 58 | Charpoy GI with plytop FD-220 Removing of unserviceable plywood/Nylon newar from Charpoy GI Pipe, tightening of loose check nuts, elbows, long rails. Short rails, legs (i.e., complete charpoy) and supply and fixing the 12 mm thick 7 ply, commercial type BWR, exterior grade (water proof), ISI-303 marked of size 1980 x 900 mm fixed on top of GI Charpoy as shown on drawing with mild steel galvanized iron nuts & bolts of size 70mmx6mm with GI washer (heavy weight) and S & F three stiffner made out of MS flat iron 35 x 5 mm parallel to short rail duly painted black will be welded between the long rail where required including making 10 Holes each charpoy(All as approved by GE and directed by Engr -in- charge. |
| 59 | As per item No. 58 above but for Supply & fixGI pipe 32mm dia medium grade for long rail 1980 mmlengtheach and threading both ends as per drawing and as directed by Engineer-in-Charge. |
| 60 | As per item No. 58 above but for Cutting the dismantled GI pipe 32mm dia long rail and modifying into one short railand one leg. The short rail threading both ends as perdrawing and legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed. as directed by Engineer-in-Charge. |
| 61 | As per item No. 58 above but for Cutting the dismantled GI pipe 32mm dia short rails and modifying into legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed. Note : Each leg shall be measured separately. |
| 62 | As per item No. 58 above but for Supply onlyGI elbow 32mm dia medium grade 3 way suitable for GI pipe charpoy conforming to relevant IS with ISI mark all as spcified and as directed by Engineer-in-Charge. |
| 63 | As per item No. 58 above but for Assembling the GI charpoy with serviceable members as retrievednew modified / supply only members as obtained vide Sl item No 81 to 85 here-in-before all as per drawing and as directed by Engineer-in-Charge. |
| 64 | Charpoy Double Bunk (TP) Double Bed bunk of size 1980 x 900 x 1750 mm. Removing of unserviceable plywood from double bed bunk on both upper and lower top, Supply and fixing the 12 mm thick plywood sheet on upper and lower top suitable for double bed bunk as shown on drg. of size 1980 x 900 mm (BWR) as per IS-303 with mild steel galvanized iron nuts & bolts of size 70mm x 6mm with GI washer (heavy weight) and including electric welding of loose upper and lower frame, centre stiffener and cleat tube size of 50 x 100 mm x 6 mm of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surface complete all as specified and directed by GE/Engineer-in-Charge. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost ofall type nut bolts and washers and painting of the double bed bunk to be included in the quoted rate. |
| 65 | Charpoy Folding IP (FD-388 (R) Removing of old unserviceable plywood from charpoy folding and supply & fixing new 12 mm thick commercial plywood BWR grade in two pieces fixed with four nuts, bolts, washers of suitable size for each piece of plywood and provide support in between long rail including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surface of charpoy complete all as specified. |
| 66 | As per item No. 65 above but for S & F in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified. |
| 67 | As per item No. 65 above but for Removing of old unserviceable parts of charpoy folding and supply and fixing the new with MS pipe of 25 mm bore with wall thickness 1.6mm by welding and including minor repair/welding completeall as specified and directed by GE/Engineer-in-Charge. |
| 68 | Chair CBA Steel with Arms FD-75(M) Removing of old broken seat and S&F new seat of existing size with 50mm thick of 32 density made of cool foam cushion pasted with adhesive over 12 mm thick plywood(7 ply) BWR as per IS 303 commercial duly covered with well finished soft best quality leatherised rexine cloth including taking out unserviceable clit. M&L two numbers of MS flat Iron size of 535mm longx 25 mm width x 5 mm thick for fixed with continuous welding to seat frame of chair CBA steel both end and duly painted with one coat of synthetic enamel paint over one coat of red oxide primer duly making two hole for each flat for fixing seat with screw & washer complete. |
| 69 | As per item No.68 above but for Removing of old broken back and S&F new back of existing size with 50mm thick of 32 density made of cool foam cushion pasted with adhesive over 12 mm thick plywood(7 ply) BWR as per IS 303 commercial duly covered with well finished soft best quality leatherised rexine cloth including taking out unserviceable clit. M&L four numbers MS clit Iron size of 65mm long x 25 mm width x 5 mm thick for fixed with continuous welding to back frame of chair CBA steel and duly painted with one coat of synthetic enamel paint over one coat of red oxide primer duly making a hole for each clit for fixing back with screw & washer complete. |
| 70 | As per item No.68 above but for Removing of old broken Arms rest and S&F new Arms rest of existing out of second class hard wood with 15mm thick made of cool foam cushion pasted with adhesive over Arm rest duly covered with well finished soft best quality leatherised rexine cloth 2mm thick and fixing with suitable screw & washer complete. |
| 71 | As per item No.68 above but for S&F PVC cap at the top of back steel pipe of chair CBA steel with arms as shown on drawing No FD-75(M) including takingout unserviceable cap complete. |
| 72 | As per item No.68 above but for S&F hard rubber shoe superior quality (as approved) fixing to leg of chair CBA steel with arms as shown on drawing No FD-75(M) including takingout unserviceable shoe complete. |
| 73 | As per item No.68 above but for M&L removing/scrapping old worn out paint from exposed steel frame of Chair CBA steel with arms as shown on drawing No FD-75(M) by sand paper/scrapper and applying two coat grey/OG colour Synthetic Enamelled paint (as approved) by spray painting machine complete and item ser No 15(a) to (f) all as specified and directed by Engr -in- Charge. NOTE: Cost of minor repair like welding to frame, screw with washer if required etc, shall be deemed to be included in the quoted rate. |
| 74 | Preparation, cleaning & filling of knots, cracks and holes if any with mixture of wood powder & fevicol to old polished wooden surfaces of any description, width or girth and applying high gloss french polish to chair dinning exposed surfaces to view, when placed in position complete all as specified and as directed by Engineer-in-Charge. Sofa Set 3 Seater (FD-281/373/ FD/MAP-II/02) |
| 75 | As per item No.74 above but for Sofa Set 4 Seater (FD-281/373/ FD/MAP-II/02) |
| 76 | As per item No.74 above but for Sofa Set 5 Seater (FD-281/373/ FD/MAP-II/02) |
| 77 | As per item No.74 above but for Chair Dining Long Back Cushioned (FD-357) |
| 78 | As per item No.74 above but for Chair Easy cushioned (FD-358) |
| 79 | As per item No.74 above but for Stool Derssing with cushioned (FD/E6/MAP/14) |
| 80 | As per item No.74 above but for Chair dinning MAP Officer (FD/MAP-II/04) |
| 81 | Bed Hard Plytop (FD-246) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and directed by Engr-in-Charge. Top plywood 12mm thick of size bed hard complete 1830 x 900 mm. (BWR) as per IS-303 (07 ply). |
| 82 | As per item No. 81 above but for Long rail of teak wood of size 100mm x 50mm x 1980mm. |
| 83 | As per item No. 81 above but for Short rail of teak wood of size and shape as per drg. |
| 84 | As per item No. 81 above but for Centre Stiffner |
| 85 | As per item No. 81 above but for Ply wood 4mm thick teak faced to the direct vision of head rest and ply wood commercial 4 mm thick to other side including 12mm thick half round cut teak wood beading all around. |
| 86 | As per item No. 81 above but for Foot rest. |
| 87 | As per item No. 81 above but for Head board frame complete with legs 12mm dia half cut round teakwood beading. |
| 88 | As per item No. 81 above but for Foot rest. |
| 89 | As per item No. 81 above but for Leg to head rest side of bed. |
| 90 | As per item No. 81 above but for Leg to foot restside of bed. |
| 91 | Table Writing (FD-275) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top newmade ofpre laminated particle board (exterior grade ) with teak face both sides of size 1145 x 600 x 18mm thick with 04 mmthick half raound teak wood beading shall be provided all round. |
| 92 | As per item No. 91 above but for Front and Back Rail |
| 93 | As per item No. 91 above but for Side rail |
| 94 | As per item No. 91 above but for Legs |
| 95 | As per item No. 91 above but for Short & Long Stiffner |
| 96 | As per item No. 91 above but for Drawers of table. |
| 97 | As per item No. 91 above but for Cabinet Shutter/Door of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board (Exterior Grade) with teak wood beading shall be provided all round including continuous piano hinges 40mm wide upto Shutter height with screw. |
| 98 | As per item No. 91 above but for Cabinet Sides of table made out of 18mm thick prelaminated particle board (Exterior Grade) duly fixed by screw. |
| 99 | As per item No. 91 above but for Cabinet Back side of table made out of 6mm thick plywood to be fixed as per drawing. |
| 100 | As per item No. 91 above but for Aluminium anodized knob 25mm of best quality. |
| 101 | As per item No. 91 above but for Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shown in drg. |
| 102 | As per item No. 91 above but for S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs. |
| 103 | Chair Dining (FD-279) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw /bomboo pins and other members of the chair dining complete and all as specified and shwon on drg. Rear leg |
| 104 | As per item No. 103 above but for Front leg |
| 105 | As per item No. 103 above but for Seat frame front rail |
| 106 | As per item No. 103 above but for Back rest |
| 107 | As per item No. 103 above but for Seat frame Side rail |
| 108 | As per item No. 103 above but for Seat frame Rear rail |
| 109 | As per item No. 103 above but for Stiffener (one large piece and two small piece of each set) |
| 110 | Chair Writing (FD-280) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair writing complete and all as specified and shwon on drg. Rear leg |
| 111 | As per item No. 110 above but for Front leg |
| 112 | As per item No. 110 above but for Arms rest |
| 113 | As per item No. 110 above but for Stiffener (one large piece and two small piece of each set) |
| 114 | As per item No. 110 above but for Seat frame side rail |
| 115 | As per item No. 110 above but for Seat frame Front/Back rail |
| 116 | Chair Easy (FD-229) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair easy complete and all as specified and shwon on drg. Front leg |
| 117 | As per item No. 116 above but for Rear leg |
| 118 | As per item No. 116 above but for Front seat rail |
| 119 | As per item No. 116 above but for Back seat rail |
| 120 | As per item No. 116 above but for Seat frame side rail |
| 121 | As per item No. 116 above but for Top rail of back frame |
| 122 | As per item No. 116 above but for Bottom rail of back frame |
| 123 | As per item No. 116 above but for Side rail of back frame |
| 124 | As per item No. 116 above but for Arms rest |
| 125 | Removing of old unserviceable plastic cane from all sorts of chairs i.e chair dining, chair writing and chair easy etc (except chair verandah) including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion, complete all as specified and as directed by Engineer-in-Charge. Chiar dining FD-279 |
| 126 | As per item No. 125 above but for Chair Writing FD - 280 |
| 127 | As per item No. 125 above but for Chair Easy FD - 229 |
| 128 | CHAIR VERANDAH (FD- 256) Taking down unserviceable cane from chair verandah and re-caning with best quality new plastic cane of 3.50 mm/ 4 mm wide plastic cane as per pattern including applying one coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge |
| 129 | As per item No. 128 above but for Continuous welding 20mm dia MS tube at hand rest frame joint, seat frame joint, back frame joint and seat to back frame stiffener joint of chair verandah all as per drawing duly painting the affected portion with two coats of synthetic enamel paint(White) over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge |
| 130 | As per item No. 128 above but for Provision of PVC bush hard of white colour approved make, fixed to legs of chair varandah including taking down old one as per drawing all as specified and as directed by Engineer-in-Charge. |
| 131 | Preparation of wood and wood based surfaces after removing stains through sand papering and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture:- Bed with plywood top (FD-246) |
| 132 | As per item No. 131 above but for Chair dining (FD-279) |
| 133 | As per item No. 131 above but for Chair Easy (FD-229) |
| 134 | As per item No. 131 above but for Chair writing (FD-280) |
| 135 | As per item No. 131 above but for Table office officer wooden (DB-4199) |
| 136 | As per item No. 131 above but for Table Writing (FD-275) |
| 137 | As per item No. 131 above but for Table office clerk wooden (DB-2201) |
| 138 | As per item No. 131 above but for Table for laboratory test with sunmica top type A (TP) |
| 139 | As per item No. 131 above but for Table for laboratory test with sunmica top type B (TP) |
| 140 | As per item No. 131 above but for Table draftman (FD-4 (M) |
| 141 | As per item No. 131 above but for Table centre (FD-274) |
| 142 | As per item No. 131 above but for Stool Laboratory wooden (TP) |
| 143 | As per item No. 131 above but for Stool Laboratory wooden type A (TP) |
| 144 | As per item No. 131 above but for Laboratory wooden type B (TP) |
| 145 | As per item No. 131 above but for Sofa set 5 seater of 3 pcs (FD-281) |
| 146 | As per item No. 131 above but for Peg Table (FD-384) |
| 147 | As per item No. 131 above but for Desk Table Computer (TP) |
| 148 | As per item No. 131 above but for Tablel dining 6 Per (FD-273) |
| 149 | As per item No. 131 above but for Table laboratory with formica top with sliding door (TP) |
| 150 | As per item No. 131 above but for Table laboratory with laminated top of size 1320 x 915 x 716 mm (TP) |
| 151 | As per item No. 131 above but for Chair easy with cushion (FD-358) |
| 152 | As per item No. 131 above but for Peg Table (FD-277) |
| 153 | As per item No. 131 above but for Table 3" x 2" with out drawer (FD-283) |
| 154 | Table 3" x 2" (900 x 600 x760 mm) without drawer(FD-283) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top newmade ofpre laminated particle board (exterior grade ) with teak face both sideof size 900 x 600 x 18mm thick with 04 mmthick half round teak wood beading shall be provided all round. |
| 155 | As per item No. 154 above but for Long rail |
| 156 | As per item No. 154 above but for Short rail |
| 157 | As per item No. 154 above but for Legs |
| 158 | As per item No. 154 above but for Short/Long Stiffeners |
| 159 | As per item No. 154 above but for S&F second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs. |
| 160 | Peg Table(450 x 300 mm) FD-277 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top newmade ofpre laminated particle board (exterior grade ) with teak face both sideof size 450 x 300 x 18mm thick with 04 mmthick half round teak wood beading shall be provided all round. |
| 161 | As per item No. 160 above but for Front and back rail |
| 162 | As per item No. 160 above but for Short rail |
| 163 | As per item No. 160 above but for Legs |
| 164 | As per item No. 160 above but for Short/Long stiffeners |
| 165 | As per item No. 160 above but for S&F second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
