Repair Maintenance Of Specialized Electrical & Mechanical Services Of Delhi High Court, New Delhi(Sh:-Upgradation Of Existing Magneto Clean Techesp Filter In Existing Rtu,Fcu & Cassette Acs At C-Blockat Delhi High Court, New Delhi, Delhi-Delhi
TDR : 37345599
Tender Notice
BOQ
Expired
Delhi
Delhi
Repair Maintenance Of Specialized Electrical & Mechanical Services Of Delhi High Court, New Delhi(Sh:-Upgradation Of Existing Magneto Clean Techesp Filter In Existing Rtu,Fcu & Cassette AcS At C-Blockat Delhi High Court, New Delhi
Name of Work: RMO specialized Electrical & Mechanical Services of Delhi High Court, New Delhi(SH:-Upgradation of Existing Magneto Clean TechESP filter in existing RTU,FCU & CASSETTE AC\"s at C-blockat Delhi High Court, New Delhi.
Sl. No.
Item Description
1
Supply, Installation, Testing and Commissioning of ESP Filter for air purification system in existing different capacities RTU(roof top unit) that improves the indoor air quality by removing dust and killing harmful bacteria. It must be MERV-15 or above rated high-efficiency on purifying particulate matter (PMx) with a minimum efficiency of 90% on 0.3-0.4 micron particulates as tested in accordance with ASHRAE 52.2.highly effective in killing allergens, bacteria and pathogens with a removal rate of 99% on E. Coli testedThe central air cleaner equipped with a VOC filter must deliver a minimum of 80% reduction of formaldehyde in less than 5 minutes The system must trap & kill technology with a very low-pressure drop of 0.2” w.g. at 2.5 ms/s. It should be a monobloc-structured unit specifically designed for integration in the Return Air path of air handling units of all sizes, to centrally capture and kill germs. It shall be in grids of sizes 610x360x150 (1000 CFM) and 610x670x150 (2000 CFM) to cover the full capacity (CFM) of RTU. The central air cleaner unit should have no consumable parts, and it should be self-contained with a powder coated steel casing. All components used in the construction of the unit must comply with the following standards of safety and quality: UL 867/CSA C22 No. AQI level can be maintained less than 50-70 (depending upon surrounding condition and with fresh air intake must be treated which feeds AHU). Product to comply IS 17570:2021/ ISO16890:2016 in general ventilation & Indoor Air Quality. . Make-Magneto clean techa) 610x670x150 (2000 CFM)
2
Supply,Installation ,testing and commissioning ofCentral Air Cleaning in Fan Coil Units of 2 TR and 2.5TR capacity.It must be MERV-15 or above rated high-efficiency on purifying particulate matter (PMx) with a minimum efficiency of 90% on 0.3 -0.4 micron particulates as tested in accordance with ASHRAE 52.2.2017 highly effective in killing allergens, bacteria and pathogens with a removal rate of 99% on E. Coli tested The central air cleaner equipped with a VOC filter must deliver a minimum of 80% reduction of formaldehyde in less than 5 minutes The system must trap & kill technology with a very low- pressure drop of 0.2” w.g. at 2.5 ms/s. It should be a mono block-structured unit specifically designed for integration in the Return Air path of air handling units of all sizes, to centrally capture and kill germs. It shall be in grids of sizes 980 (w) x 200 (h) x 130 (d) (1000CFM) and 1265 (w) x 325 (h) x 150 (d) (2000 CFM) to cover the full capacity (CFM) of AHU. The central air cleaner unit should have no consumable parts, and it should be self-contained with a powder coated steel casing. All components used in the construction of the unit must comply with the following standards of safety and quality: All module of filter shall be UL 867/CSA C22 No and notcomponent. AQI levelcanbe maintained less than 50-70 (depending upon surrounding condition and with fresh air intake must be treated which feeds AHU). Product to complyIS 17570:2021 ISO16890:2016 in general ventilation & Indoor Air Quality. The system for Performance Guarantee Air Cleaner should have following parameter (as per govt. notification). ePM 1.0 efficiency over 90% as per ISO 16890 and test dust as per ISO 15957. Preferences as mentioned in \"Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012\" shall be given to Micro and Small enterprises already pre approved with HC .For ease of supply and spares the OEM must have manufacturing facilities in India and support MAKE In India initiative with existing supply base at HC complex . The OEM must strictly follow DIPP guidelines for more than 50 % Indian components.PM2.5µg/m3-24hoursaverage=60,PM 10 µg/m3 -- 24 hours average =100 Co2 ppm –FreshairLinkTVOCS µg/m3 -– 0-1.5mg/m3
3
Supply, installation, testing, commissioning, and handing over of a central air cleaning system with high filtration efficiency on PM2.5 combined with a high kill rate on airborne infectious diseases using Ultraviolet Germicidal Irradiation. When integrated with a Cassette type air conditioner,/High Wall Acs the unit is effective in reducing high concentration of airborne dust ranging from 0.1 - 10.0 um in size. The system should be easily retrofitted with every type of cassette units. It provides up to 90% filtration efficiency on PM2.5 in 1 hour of re-circulating air in 30 m3 volume as per ANSI/AHAM AC-1 standard. The unit should be designed using an electronically charged filter (ECF) combined with Ultraviolet Germicidal Irradiation (UVGI) and bi- polar ionizer as per recommendation by ASHRAE and CDC for protection from airborne infectious diseases. The air cleaner can integrate with a wide range of standard cassette type air conditioners, to centrally capture and kill microbes, without any electrical or mechanical modifications. The filtration system should also include advanced controls for auto-airflow detection (air low sensor) for ease of application and operation. The high efficiency filtration system with very low airflow resistance of 0.06” WG at 1.5 m/s. Eliminates various types of bio- aerosols, including SARS-CoV-2* (causing COVID-19), Influenza A (H1N1), Tuberculosis (TB), etc. Electronically Charged Filter (ECF) that is built on 3rd party lab validated Trap and Kill technology. Complies with ASHRAE’s technology recommendation in ASHRAE Position Document on Filtration and Air Cleaning and CDC’s recommendation in Protection from Chemical, Biological, or Radiological Attacks. Dust collection efficiency: up to 90% on 2.5 µm, in 1-hour of 30 m3 air volume as per ANSI/AHAM AC-1 standard. Designed with UV- C at 254 nm to eliminate corona virus (SARS- CoV-2). The product must support “Make In India” with more than 50% local components. The UV-C lamp must be shatterproof with compliant coating for breakage protection. Compatible with any existing or new cassette type indoor units of any manufacturer without modification. Designed with Electronically Charged Filter (ECF) that uses electron beaming on an electrostatically charged media. Includes UL 94 (Horizontal Burn) compliant throw-away media in ECF. Completely safe with Zero UV Leak tested outside of the air conditioner. Electronically Charged Filter (ECF) that is built on 3rd party lab validated Trap and Kill technology. Complies with ASHRAE’s technology recommendation in ASHRAE Position Document on Filtration and Air Cleaning and CDC’s recommendation in Protection from Chemical, Biological, or Radiological Attacks. Dust collection efficiency: up to 90% on 2.5 µm, in 1-hour of 30 m3 air volume as per ANSI/AHAM AC-1 standard. Designed with UV- C at 254 nm to eliminate coronavirus (SARS- CoV-2).The UV-C lamp must be shatterproof with compliant coating for breakage protection. Compatible with any existing or new cassette type indoor units of any manufacturer without modification. Designed with Electronically Charged Filter (ECF) that uses electron beaming on an electrostatically charged media. Includes UL 94 (Horizontal Burn) compliant throw-away media in ECF. Completely safe with Zero UV Leak tested outside of the air conditioner.Preferences as mentioned in \"Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012\" shall be given to Micro and Small enterprises already pre approved with HC .For ease of supply and spares the OEM must have manufacturing facilities in India and support MAKE In India initiative with existing supply base at HC complex . The OEM must strictly follow DIPP guidelines for more than 50 % Indian components.
4
Credit on account of dismantle material received from the work and to be carried away by the contractor
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
