Tender For Construction Of Meher Community Hall At Junagarh Under Kalahandi R And B Division For The Year 2022-23
Tender Value
42.40 Lakhs
Estimated cost
Bid Submission
01 May 2023
0 days left
EMD
42409
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
junagarh → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Meher Community Hall At Junagarh Under Kalahandi R And B Division For The Year 2022-23 Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kind of soil within initial lead and lift in excavation of foundation and 1.50mt initial lifts including rough dressing and breaking clods and deposited theexcavated materials away from work site etc complete. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammedetc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. |
| 4 | Fly AshBrick masonary in F&P and Superstructure in cement mortar (1:6) in using Fly Ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2 with dimentional tolerance +/- 8% including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. |
| 5 | Foundation |
| 6 | SuperStruture |
| 7 | RCC work in cc (1:1.5:3) using 20mm & down graded CBBHG chipsincluding all cost, conveyance, taxes, royalties, watering & curing and labour with T&P as required for the work etc complete. |
| 8 | (A) Column base & Footing |
| 9 | (B) Column |
| 10 | (C) Plinth beam |
| 11 | (D) Lintel beam |
| 12 | (d) Wall Beam |
| 13 | (E)Roof Slab |
| 14 | (F) Chajja |
| 15 | Providing ,straighting,cutting,bending,binding of MS tor bar including tying the grills & placing in proper position including cost of 18 to 20 gauge binding wires & MS rod with all labour, T&P etc.complete. |
| 16 | 12mm th. Cement plaster [1:6] over brick /stone masonary including watering curring cost conveyance taxesand royality etc. complete. |
| 17 | 16mm th. Cement plaster [1:6] over brick masonary including watering curring cost conveyance taxes and royality etc. complete |
| 18 | 20mm thick CP (1:6)over stone masonary including all cost , conveyance , taxes, royalty, watering curring, etc. complete . |
| 19 | Finishing wall Painting two coats with any approved weather seal coat (ISI) paint over a coat of wall primer including cost,conveyance, taxes and labour with T&P etc. |
| 20 | Finishing plastered surface of walls with acrylic wall putty (water based) of approval make (Burger / Neolac / Asian /ICI equivelent and making smooth even to surface to receive painting including cost of scaffolding staging chargesincluding cost of all materials labour T & P etc. as per direction of Engineer -In -charge. |
| 21 | Wall Painting two coats with any approved plastic emulssion paint over a coat of wall primer including cost,conveyance, taxes and labour with T&P etc. complete. |
| 22 | Providing , fitting and fixing of MS Grill forwindow including cost conveyance taxes etc ofapproved design as directed by the Department |
| 23 | Providing fitting and fixing of GCI sheet in roofing including all cost conveyance taxes etc. complete |
| 24 | Providing, Fitting & Fixing of PVC Shutter of approved make with all fittings with cost of choukath etc complete. |
| 25 | Painting two coats to steel work with any approved enamale paint over a coat of primring including cost,conveyance, taxes and labour with T&P etc. complete. |
| 26 | Providing , fitting and fixing of 2\" 0\" X 2\" 0\" vitrified tiles ( average 10mm thick ) in floor , steps, landing over 25mm thick CM (1:1) jointed with neat white cement slurry mixed with pigment to match the shade of tiles, rubbing and polishing including all cost, conveyance, taxes, royalties of all materials, vitrified tiles with watering & curing and labour with T&P as required for the work etc complete. |
| 27 | Providing , fitting and fixing ofvitrified tiles ( average 10mm thick ) in dodos skirting, risers of steps over 12mm thick CM (1:3) jointed with neat white cement slurry mixed with pigment to match the shade of tiles including all cost, conveyance, taxes, royalties of all materials, vitrified tiles with watering & curing and labour with T&P as required for the work etc complete. |
| 28 | Providing , fitting and fixing of Granite tiles above 0.40sqm ( 20mm thick )in floor , steps, landing over 25mm thick CM (1:1) jointed with neat white cement mixed with pigment to match the shade of tiles, rubbing and polishing including all cost, conveyance, taxes, royalties of all materials, Granite tiles, watering & curing and labour with T&P as required for the work etc complete. |
| 29 | Providing and fixing 30 mm thick flush Door shutters conforming to IS:2002(part I) decorative type,core of block board construction with frame of 1st class hard wood and well match teak 3 ply veneering with verical grains or cross bands and face veneers on both face of shutters inclusive of 4 Nos of stainless steel Butt Hinges (100mmx60mmx2.5mm) 40 mm stainless steel screws, cylindrical lock (Godrej-9843), TowerBo;t SS Screw,teak wood lipping arround the edge & paste with 1.5mm thick laminate on both side of the flush Door,etc including the cost of all materials,hardwae fittings , cost of all labour,conveyance,loading, unloading, T&P , etc complete as per direction of Engineer-in-charge. |
| 30 | 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect |
| 31 | Supplying and fixing of dressed &well seasoned sal wood work framed and fixed [wrought and put up] in trusses,purlines , beam , frame of doorswindow & ventilators including cost conveyance taxes etc complete |
| 32 | Providing fitting & fixing of Stainless steel of 304 grade in hand railing using 5000mm dia of 2mm thick ciacular pipe wih Balustradeof size 32mm x 32mm x 2mm @ .090mtr c/c and stainless square type bracing of size 32mm x 32mm x 2mm in 3 rows in stair case including cost, conveyance, taxes etc. complete |
| 33 | Supplying & laying of precast interlocking concrete block of 80 cm thick of approved design and filling the joint with sand on the prepared surface including cost of all charges etc. complete as per MORD specification (6:7). |
| 34 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 35 | E.I Works:- Recessed wiringto Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R. PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with5/6 250volt modular switch,ceilling rose mounted on Modular box having front modular coverIncluding all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard. |
| 36 | a)Group-A |
| 37 | b) Group-B |
| 38 | c) Group-C |
| 39 | Recessed modular wiring to 5/6A socket outlet with 2x1mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch. |
| 40 | a) Group-A |
| 41 | b) on existing board |
| 42 | Recessed modular wiring to power plug point consisting of 16A modular shuttered socket and 16A indicator type switchwith 2x4mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x1.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required of Havels make. |
| 43 | Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. |
| 44 | 1x1.5mm2 Sub-Main Wiring for Invertor onnectiom. |
| 45 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 46 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 47 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 48 | S/F. of 8Way double door D.Box with 25A DP MCB + 6x6A.SP MCB of Havels make. |
| 49 | S/F of 25A/32Amp AC starterswitch of Havells/legrand /or equivalent make. |
| 50 | S/F of Call bell/ Buzzer and Bell push and flexible cord (Sl. 1.30 of SoR-2015) |
| 51 | S/F63A TPN Main switchof Havells /HPL/L&T or any equivalentmake |
| 52 | S/F of1200mm Ac ceilling Fan of model usha /Bajaj/C&G/Havells make of mentioned brand with Fan rod& Hook as per direction of engineer in charge |
| 53 | S/F of1200mm Ac ceilling Fan of model usha Allure plus (ivory/White colour)/ bajaj Regal gold NXG (ivory/white)/Havells festiva/equs(white/titanium)/equivalent make of mentioned brand w/o Regulator as per direction of engineer in charge |
| 54 | S/Fof step type electronic fan regulator of Anchor/Deluxe/Cona -7066 make |
| 55 | S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model) |
| 56 | Supply and Fixing of GI bend pipe for street lightincluding all accessories i.e clamp or jam lock etc |
| 57 | S/F of 18wt LED T.L fittingof Phillips/ Bajaj/Havels make |
| 58 | S/F of computer Board consisting of 3 Nos of Modularplug and switchall accessories including recessed wiring,Cutting of wall & connection as per requirement. |
| 59 | S/F of 10watt LED Bulbof Phillips/ Bajaj/Havels/HPL make |
| 60 | S/F of Modular Angle Holder. |
| 61 | 6 watt LED portico light for Balcony. |
| 62 | S/F of 12watt Surface mounted LED down light complete of Havells/Bajaj/HPL make. |
| 63 | S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.2-SOR-2015) |
| 64 | S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard . |
| 65 | S/F of extra long No.8 G.I.wire for running of earth from Gr. Floor to 1st Floor Main Switch &2nd Floor Main Switch. |
| 66 | S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) |
| 67 | Laying of cable on wall surface. |
| 68 | S/F of90wt LED Street light complete with lamp of Havels/HPL make. |
| 69 | Provision of lightning arrester with 85mm dia 3mm thick copper base pate and copper tape 20x3mmthick including all accessories |
| 70 | S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipeincluding soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 71 | S/F of 1650 VA UPS( Microtake/Luminous)with2nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent) |
| 72 | G.P.H Works:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 73 | 20mm dia C - PVC pipe |
| 74 | 25mm dia C - PVC pipe |
| 75 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 76 | 25mm dia PVC ASTM pipe (sch-80) |
| 77 | 32mm dia PVC ASTM pipe (sch-80) |
| 78 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 79 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 80 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 81 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 82 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 83 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 84 | 25mm dia brassfull way valve (Shakti make) |
| 85 | 32mm dia brassfull way valve (Shakti make) |
| 86 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 87 | 25mm dia C.P Flush cock |
| 88 | 15mm CP Extension piece |
| 89 | 125mm CP grating |
| 90 | 15mm size C.P. flange |
| 91 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 92 | 2000 liters capacityPVC water storage tank |
| 93 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 94 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 95 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 96 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 97 | 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 98 | 80mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 99 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 100 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 101 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 102 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 103 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 104 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 105 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 106 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 107 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 108 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 109 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 110 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 111 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge |
| 112 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 113 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 114 | European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 115 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 116 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 117 | Under Counterbasin(560x450)Hindware-No.10095 |
| 118 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 119 | 25mmx600mm long CP towel rail |
| 120 | Towel ring |
| 121 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 122 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 123 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 124 | 600mmx450mm size B.E mirror (swivelled type) |
| 125 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 126 | CP soap holder |
| 127 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 128 | ½” x 5” CP Shower (Plaza Deluxe Make) |
| 129 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 130 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 131 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 132 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 133 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge |
| 134 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 4 x 2.13 x 1.22 x 0.10 |
| 135 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 136 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 137 | Kajaria/Somany/Johnson tile 30cmx30cm |
| 138 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 139 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 140 | Kajaria/Somany/Johnson tile 45cmx30cm 4 x 2 (2.16+1.22) x 1.83 |
| 141 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 4 x0.76 x1.98 |
| 142 | 1 no 20 Users Septic tank Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 143 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 144 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge |
| 145 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 146 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 147 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 148 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 149 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 150 | RCC floor, roof slab chhaja up to 4.430 m height |
| 151 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 152 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 153 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 154 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 155 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 156 | AS PER CHIEF ENGINEER, RWS&S. ODISHA BHUBANSWER INDICATIVE RATES VIDE LETTER. NO. PB.340 DT.31.5.2010 AND Lr. No. 7050 DT 05.10.2010 |
| 157 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 125mmdia G.I/P.V.C/M.S casing pipes for housting fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), |
| 158 | Drilling of 125mm x 100 mmdia bore |
| 159 | 00 mtr to 30mtr |
| 160 | Drilling of 100 mm dia bore |
| 161 | 38 mtr to above |
| 162 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 163 | Lowering of 125mm dia P.V.C casing pipes |
| 164 | 00 mtr to 30mtrs |
| 165 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 166 | 125mm dia PVC (sch-80) pipe |
| 167 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 168 | By DTH Rig |
| 169 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 170 | Rocky terrain with boulder formation for 300m depth |
| 171 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 172 | 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 173 | DOL Control panel |
| 174 | 40mm dia steel short piece |
| 175 | Well cap |
| 176 | 50mm size CI bracket |
| 177 | 2.50sqmm flat cable |
| 178 | 20mm dia rigid UPVC pipes |
| 179 | Steel rope with cover |
| 180 | Labour charges for lowering including transportation |
| 181 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 182 | 32mm HDPE pipes (Finolex/Supreme make) |
AI Tender Summary
Tender Timeline
Apr 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender