Tender For Extension Modification Of Existing 440 V Ohl From Qry 1 Extension To Qry 1 Mines For Providing Proper Lighting In Haul Road New Pumping Site And In Mines Rocp
Tender Value
5.98 Lakhs
Estimated cost
Bid Submission
03 May 2023
0 days left
EMD
7490
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandwa → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Extension Modification Of Existing 440 V Ohl From Qry 1 Extension To Qry 1 Mines For Providing Proper Lighting In Haul Road New Pumping Site And In Mines Rocp Extension Modification Of Existing 440 V Ohl From Qry 1 Extension To Qry 1 Mines For Providing Proper Lighting In Haul Road New Pumping Site And In Mines Of Rajhara Ocp Under Rajhara Area
BOQ
| Sl. No. | Item Description |
| 1 | Erection of metallic pole of above 10 mtr. And upto 12 mtr. In cement concrete 1:3:6 (1 cement:3 corse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 2 | Erection of metallic pole of above 8 mtr. And upto 10 mtr. In cement concrete 1:3:6 (1 cement:3 corse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 3 | Supplying and erction of stay set complete (galvanised) with 19/20 mm dia x 1.8 mtr. Long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm , thimble , stay clamps , turn buckle (20 mm x 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc. in cement concrete1:3:6 (1 cement:3 corse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 mtr. long brace of size 50 mm x 50 mm x 6 mm angle iron with 50 mm dia pulley fixed at one end of the braceas required |
| 4 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for 4 wire over head line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulatorpins etc (as per drawing) and painting with primer and finishedpaint as required . |
| 5 | Erection of angle iron/channel iron cross arm on wood/RCC/PCC/ steel tubular/ rail pole etc. as required. |
| 6 | Supplying and erection of galvanised D iron clamps complete with shackle insulator (100 mm x 110 mm) , GI bolts , nuts and washers , coach screw etc. as required |
| 7 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 8 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required. |
| 9 | Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required. |
| 10 | Supplying and erection of 100 mm x 80 mm pin insulator with GI bolt , nuts and straps etc. as required |
| 11 | Erection of ACSR conductorof 7/1.96mm to 7/3.10 mm dia and includingbinding etc. as required |
| 12 | Coolie ( for transporting of poles, conductor, iron material etc. from store/outside to mines) |
| 13 | 8 SWG GI wire |
| 14 | Erection of GI wire no. 8 SWG including binding etc. as required |
| 15 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 16 | Providing and fixing 4.00mmdiacopperwireonsurfaceor in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 17 | Supplying and fixing MV horn gap lightening arrestor as required. |
| 18 | 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 19 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 150 mm diameter pipes |
| 20 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work : 100 mm diameter pipes |
| 21 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Apr 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender