Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #37338947

Tender For Quantity Rate Contract On Annual Basis For Supply Installation Testing And Commissioning Of Energy Efficient Centrifugal Pumpsets (3600 Lpm, 75 Meter Head, 2980/2900 Rpm) At Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W/S Sc

Issued by Government Departments · dehradun, Uttarakhand
Tender Value
38.75 Lakhs
Estimated cost
Bid Submission
02 May 2023
0 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Quantity Rate Contract On Annual Basis For Supply Installation Testing And Commissioning Of Energy Efficient Centrifugal Pumpsets ( 3600 Lpm, 75 Meter Head, 2980 / 2900 Rpm ) At Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal , Quantity Rate Contract On Annual Basis For Sitc Of Energy Efficient Centrifugal Pumpsets ( 3600 Lpm, 75 Meter Head, 2980 / 2900 Rpm ) At Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal , Supply Of Energy Efficient Split Casing Horizontal Centrifugal Pump With Discharge Capacity 3600 Lpm, Head 75 Mtr., Rpm 2900 / 2980 With The Following Specifications:- Suction Casing Materials – Ci, Casing – Wcb, Stage Casing – Ci, Impeller – Bronze, Shaft & Sleeve – Ss-410 , Supply Of Energy Efficient 3 Phase Squirrel Cage Induction Motor Ie3-Is 126125-2011, Voltage 415.0 ± 10% Protection Type Ip – 55, Tefc, 250 / 335 Kw / Hp And Suitable For Above Pump 2900 / 2980 Rpm, 3 Phase Ac. , Supply Of Control Panel Cum Starter Suitable For Above Pumpset. Ms Steel Fabricated Cubical Type Dust & Vermin Proof, Floor Mounted With Front Door 14 / 16 Swg, Rubber Chord Lining To Prevent Dust And Moisture Duly Painted Of Super Enameled Gray Paint Of Reputed Make With Provisions Of Ventilator On The Side Of The Wings, Cable Entry Holes For Cable Entry Holes For Cable For Incoming And Outgoing With Internal Wiring In Copper Wire With Copper Bus Bars ( 3 Phase + 1 Neutral ) Of Suitable Capacity Having Specification As Under ( As Per Ie Rules ) . A Incoming Panel: One No. Consisting Of Following And Suitable For Above Pumpsets- I Mccb Complete With All Protections – 1 No. Ii Ammeters Complete With Cts And Selector Switch – 1 No. Iii Voltmeters With Selector Switch – 1 No. Iv Frequency Meter – 1 No. V Pf Meter – 1 No. Vi Phase Indicating Lamps Complete With Instrument, Fuses And Toggle Switch – 1 Set Vii On / Off Indicator – 1 Set Viii Kwh Meter – 1 No. B Outgoing Panel: 2 Nos. Each Consisting Of Following And Suitable For Above Pumpsets - I Mccb Complete With All Protections – 1 No. Ii Ammeters Complete With Cts And Selector Switch – 1 No. Iii Lt Power Capacitors Of Suitable Rating – 1 No. Iv Single Phasing Preventer – 1 No. V Earth Faulty Relay – 1 No. Vi Hour Counter Meter – 1 No. Vii Indicating Lamp – 3 No. C 3 Nos. Each Consisting Of Following And Suitable For Above Pumpsets - I Mccb Switch For Light & Fan And Automation Etc. – 3 Nos. , Supply Of Valves And Fitting As Per Below For Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal: A ) 200 Mm Size Cast Steel D / F Sluice Valve, Class 150 For Suction Side 01 No. , B ) 150 Mm Cast Steel D / F Sluice Valve, Class 300 And Suitable For Above Pumpset In Delivery Side. , C ) 150 Mm Cast Steel D / F Non Return Valve, Class 300 And Suitable For Above Pumpset, In Delivery Size. , Making Tee, Bend, Reducer And Enlarge By Welding For Suction And Delivery Side Both As Per Requirement Of Side And Piping Condition, Including Pipe, Labour, Material, T&P Etc. Complete In All Respect. , Gauges:- Supply And Fixing Of Gauges And Fittings As Detail Below:- A ) Pressure Gauge 100 Mm Dial Size Of 0-100 Kg / Cm2 – 01 No. B ) Compound Gauge 100 Mm Dial Size Of 0-1 Kg / Cm2 – 01 No. C ) Heavy Duty Control Cock – 01 No. D ) M.S. Nipple Pipes, Elbows Etc., Required For Fixing Above Gauges On Pump – 01 Set. , Supply Of Copper Conductor Flat Submersible Cable 50 Mm2, 3 Core 1100 Volts As Per Is: 694. , Dismantling Of Existing Pumping Plants And Accessories:- Dismantling And Removing Of Existing Pump Set And Valves Etc. And Making Of New Foundation According To The New Pumpset & Handing Over The Same To The Department As Per The Direction Of Engineer Incharge. , Cartage Of Heavy Duty Material Like Pump Motor, Starter Panel To The Site Of Work By Pulling And Pushing Method Upto Site From Road Head Of Water Pump House. , Earthing:- Double Loop Earthing Of All Electrical Equipments ( Such As Motor, Starter, Panel & Transformer Etc. ) I / C Supply Of Copper Earth Strips, Copper Earth Plates, Gi Boxes, Funnel, Pipe Etc. As Required As Per Latest Ie Rules Will Be Carried Out By The Contractor, I / C Digging Of Pits, Filling Of Charcoal And Salt In Pits Complete In All Respects ( As Per Ie Rules ) Detailed As Below – I ) For Control Panel – All Pumpset Ii ) For Transformer – All Transformer , Installation, Commissioning & Testing Of Complete Pumping Plant Including All Valves. , Supply 400 Sqmm Lt Power Aluminium Armoured Cable Conductor Pvc Type St2 Outer Sheathed, 650 / 1100V Grade As Per Is 7098 ( Part 1 ) 1988.

BOQ

Name of Work:Quantity Rate Contract on Annual basis for SITC of Energy Efficient Centrifugal Pumpsets (3600 LPM, 75 Meter Head, 2980/2900 RPM) at Raw Water Pumping Station Pumpset No. 1 under New Tehri Pumping W/s Scheme, Distt. Tehri Garhwal
Sl. No. Item Description
1Quantity Rate Contract on Annual basis for SITC of Energy Efficient Centrifugal Pumpsets (3600 LPM, 75 Meter Head, 2980/2900 RPM) at Raw Water Pumping Station Pumpset No. 1 under New Tehri Pumping W/s Scheme, Distt. Tehri Garhwal
2Supply of Energy Efficient split casing Horizontal centrifugal pump with discharge capacity 3600 LPM, Head 75 mtr., RPM 2900/ 2980 with the following specifications:-Suction Casing materials – CI, Casing – WCB, Stage Casing – CI, Impeller – Bronze, Shaft & Sleeve – SS-410
3Supply of Energy Efficient 3 phase squirrel cage induction motor IE3-IS 126125-2011, voltage 415.0 ± 10% protection type IP – 55, TEFC, 250/335 KW/HP and suitable for above pump 2900/2980 RPM, 3 phase AC.
4Supply of Control Panel cum starter suitable for above pumpset. MS Steel fabricated cubical type dust & vermin proof, floor mounted with front door 14/16 SWG, rubber chord lining to prevent dust and moisture duly painted of super enameled gray paint of reputed make with provisions of ventilator on the side of the wings, cable entry holes for cable entry holes for cable for incoming and outgoing with internal wiring in copper wire with copper bus bars (3 Phase + 1 neutral) of suitable capacity having specification as under (as per IE rules). A Incoming Panel: One no. consisting of following and suitable for above pumpsets-i MCCB complete with all protections – 1 No.ii Ammeters complete with CTs and selector switch – 1 No.iii Voltmeters with selector switch – 1 No.iv Frequency meter – 1 No.v PF meter – 1 No.vi Phase indicating lamps complete with instrument, fuses and toggle switch – 1 Setvii On/off indicator – 1 Setviii KWH meter – 1 No.B Outgoing Panel: 2 nos. each consisting of following and suitable for above pumpsets -i MCCB complete with all protections – 1 No.ii Ammeters complete with CTs and selector switch – 1 No.iii LT power capacitors of suitable rating – 1 No.iv Single phasing preventer – 1 No.v Earth Faulty Relay – 1 No.vi Hour Counter Meter – 1 No.vii Indicating Lamp – 3 No.C 3 Nos. each consisting of following and suitable for above pumpsets -i MCCB switch for light & fan and automation etc. – 3 Nos.
5Supply of Valves and fitting as per below for Raw Water Pumping Station Pumpset No. 1 under New Tehri Pumping W/s Scheme, Distt. Tehri Garhwal: a) 200 mm size cast steel D/F Sluice valve, class 150 for suction side 01 No.
6b) 150 mm cast steel D/F sluice valve, class 300 and suitable for above pumpset in delivery side.
7c) 150 mm cast steel D/F non return valve, class 300 and suitable for above pumpset, in delivery size.
8Making Tee, bend, reducer and enlarge by welding for suction and delivery side both as per requirement of side and piping condition, including pipe, labour, material, T&P etc. complete in all respect.
9Gauges:- Supply and fixing of gauges and fittings as detail below:- a) Pressure gauge 100 mm dial size of 0-100 kg/cm2 – 01 no.b) Compound gauge 100 mm dial size of 0-1 kg/cm2 – 01 no.c) Heavy duty control cock – 01 no.d) M.S. Nipple pipes, elbows etc., required for fixing above gauges on pump – 01 set.
10Supply of copper conductor flat submersible cable 50 mm2, 3 core 1100 volts as per IS: 694.
11Dismantling of existing pumping plants and Accessories:- Dismantling and removing of existing pump set and valves etc. and making of new foundation according to the new pumpset & handing over the same to the department as per the direction of Engineer incharge.
12Cartage of heavy duty material like pump motor, starter panel to the site of work by pulling and pushing method upto site from road head of water pump house.
13EARTHING:- Double Loop earthing of all electrical equipments (such as motor, starter, panel & transformer etc.) I/C supply of copper earth strips, copper earth plates, GI boxes, funnel, pipe etc. as required as per latest IE rules will be carried out by the contractor, I/C digging of pits, filling of charcoal and salt in pits complete in all respects (As per IE rules) detailed as below –I) For Control panel – All pumpsetII) For Transformer – All transformer
14Installation, commissioning & testing of complete pumping plant including all valves.
15Supply 400 sqmm LT Power Aluminium Armoured Cable Conductor PVC type ST2 outer sheathed, 650/1100V Grade as per IS 7098 (Part 1) 1988.

AI Tender Summary

OUR REF NO 37338947
AUTHORITY Government Departments
TENDER VALUE 38.75 Lakhs
LAST DATE 02-05-2023
Authority
Authority Name Drinking Water And Sanitation Department
Work Description Quantity Rate Contract On Annual Basis For Supply Installation Testing And Commissioning Of Energy Efficient Centrifugal Pumpsets ( 3600 Lpm, 75 Meter Head, 2980 / 2900 Rpm ) At Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal , Quantity Rate Contract On Annual Basis For Sitc Of Energy Efficient Centrifugal Pumpsets ( 3600 Lpm, 75 Meter Head, 2980 / 2900 Rpm ) At Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal , Supply Of Energy Efficient Split Casing Horizontal Centrifugal Pump With Discharge Capacity 3600 Lpm, Head 75 Mtr., Rpm 2900 / 2980 With The Following Specifications:- Suction Casing Materials – Ci, Casing – Wcb, Stage Casing – Ci, Impeller – Bronze, Shaft & Sleeve – Ss-410 , Supply Of Energy Efficient 3 Phase Squirrel Cage Induction Motor Ie3-Is 126125-2011, Voltage 415.0 ± 10% Protection Type Ip – 55, Tefc, 250 / 335 Kw / Hp And Suitable For Above Pump 2900 / 2980 Rpm, 3 Phase Ac. , Supply Of Control Panel Cum Starter Suitable For Above Pumpset. Ms Steel Fabricated Cubical Type Dust & Vermin Proof, Floor Mounted With Front Door 14 / 16 Swg, Rubber Chord Lining To Prevent Dust And Moisture Duly Painted Of Super Enameled Gray Paint Of Reputed Make With Provisions Of Ventilator On The Side Of The Wings, Cable Entry Holes For Cable Entry Holes For Cable For Incoming And Outgoing With Internal Wiring In Copper Wire With Copper Bus Bars ( 3 Phase + 1 Neutral ) Of Suitable Capacity Having Specification As Under ( As Per Ie Rules ) . A Incoming Panel: One No. Consisting Of Following And Suitable For Above Pumpsets- I Mccb Complete With All Protections – 1 No. Ii Ammeters Complete With Cts And Selector Switch – 1 No. Iii Voltmeters With Selector Switch – 1 No. Iv Frequency Meter – 1 No. V Pf Meter – 1 No. Vi Phase Indicating Lamps Complete With Instrument, Fuses And Toggle Switch – 1 Set Vii On / Off Indicator – 1 Set Viii Kwh Meter – 1 No. B Outgoing Panel: 2 Nos. Each Consisting Of Following And Suitable For Above Pumpsets - I Mccb Complete With All Protections – 1 No. Ii Ammeters Complete With Cts And Selector Switch – 1 No. Iii Lt Power Capacitors Of Suitable Rating – 1 No. Iv Single Phasing Preventer – 1 No. V Earth Faulty Relay – 1 No. Vi Hour Counter Meter – 1 No. Vii Indicating Lamp – 3 No. C 3 Nos. Each Consisting Of Following And Suitable For Above Pumpsets - I Mccb Switch For Light & Fan And Automation Etc. – 3 Nos. , Supply Of Valves And Fitting As Per Below For Raw Water Pumping Station Pumpset No. 1 Under New Tehri Pumping W / S Scheme, Distt. Tehri Garhwal: A ) 200 Mm Size Cast Steel D / F Sluice Valve, Class 150 For Suction Side 01 No. , B ) 150 Mm Cast Steel D / F Sluice Valve, Class 300 And Suitable For Above Pumpset In Delivery Side. , C ) 150 Mm Cast Steel D / F Non Return Valve, Class 300 And Suitable For Above Pumpset, In Delivery Size. , Making Tee, Bend, Reducer And Enlarge By Welding For Suction And Delivery Side Both As Per Requirement Of Side And Piping Condition, Including Pipe, Labour, Material, T&P Etc. Complete In All Respect. , Gauges:- Supply And Fixing Of Gauges And Fittings As Detail Below:- A ) Pressure Gauge 100 Mm Dial Size Of 0-100 Kg / Cm2 – 01 No. B ) Compound Gauge 100 Mm Dial Size Of 0-1 Kg / Cm2 – 01 No. C ) Heavy Duty Control Cock – 01 No. D ) M.S. Nipple Pipes, Elbows Etc., Required For Fixing Above Gauges On Pump – 01 Set. , Supply Of Copper Conductor Flat Submersible Cable 50 Mm2, 3 Core 1100 Volts As Per Is: 694. , Dismantling Of Existing Pumping Plants And Accessories:- Dismantling And Removing Of Existing Pump Set And Valves Etc. And Making Of New Foundation According To The New Pumpset & Handing Over The Same To The Department As Per The Direction Of Engineer Incharge. , Cartage Of Heavy Duty Material Like Pump Motor, Starter Panel To The Site Of Work By Pulling And Pushing Method Upto Site From Road Head Of Water Pump House. , Earthing:- Double Loop Earthing Of All Electrical Equipments ( Such As Motor, Starter, Panel & Transformer Etc. ) I / C Supply Of Copper Earth Strips, Copper Earth Plates, Gi Boxes, Funnel, Pipe Etc. As Required As Per Latest Ie Rules Will Be Carried Out By The Contractor, I / C Digging Of Pits, Filling Of Charcoal And Salt In Pits Complete In All Respects ( As Per Ie Rules ) Detailed As Below – I ) For Control Panel – All Pumpset Ii ) For Transformer – All Transformer , Installation, Commissioning & Testing Of Complete Pumping Plant Including All Valves. , Supply 400 Sqmm Lt Power Aluminium Armoured Cable Conductor Pvc Type St2 Outer Sheathed, 650 / 1100V Grade As Per Is 7098 ( Part 1 ) 1988.
Basic Detail
Tender No 32/E-Tendering/2023-24 Dated 18.04.2023
Bidding Type Tender
Location
City dehradun
State Uttarakhand
Key Dates
Publish Date 20 Apr 2023
Submission Date 02 May 2023
Open Date 03 May 2023
Finance
Tender Value 38.75 Lakhs
Tender Fee 3540
EMD 1.03 Lakhs
Exemption Not Available
Document List
adea88ad-5fec-4fc6-91da-438e6f4fa677.html
BOQ_70347.xls
ChambaPumping.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 20, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
May 02, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 03, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

adea88ad-5fec-4fc6-91da-438e6f4fa677.html

xls

BOQ_70347.xls

pdf

ChambaPumping.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders