Tender For Annual Repairs And Maintenance To Esi Hospital And Staff Quarters At Thottada, Kannur And Branch Office,Dispensary At Pappinisseri,Kannur.For The Period Of Two And Half Month.
Tender Value
5.28 Lakhs
Estimated cost
Bid Submission
27 Apr 2023
0 days left
EMD
10570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thottada → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repairs And Maintenance To Esi Hospital And Staff Quarters At Thottada, Kannur And Branch Office, Dispensary At Pappinisseri, Kannur.For The Period Of Two And Half Month.
BOQ
| Sl. No. | Item Description |
| 1 | Engaging skilled Plumber cum supervisor (Male Only) with necessary tools and miscellaneous minor fittings such as Teflon tape, washers, jumper valves etc for attending the day to day complaints , minor repair works, fixing /replacing the damaged fittings such as taps/ wash basins, EWC/IWC, flushing cisterns, Replacing damaged PVC/GI pipe lines, PVC rain water pipes and fittings, pumping water to the Hospital buildings and staff quarters includingcleaning service tanks ,minorrepairing and maintenance of Pumps and periodic chlorination of open wells etc all works connected with internal/ external water supply lines, water supply fittings/ fixtures, sanitary installations, under ground sumps/ OHT, Plumbing works connected with STP etc to ESI Hospital and staff quarters at Thottada, Kannur and Branch Office,Dispensary at Pappinisseri,kannur. And Supervision of work done by other workers as a team leader including liaison with Hospital/dispensaries authorities and ESIC Engineers etc. as directed by the Engineer in charge |
| 2 | Plumber in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days excluding Sundays or any one off day per week. |
| 3 | Engaging helper to plumber for attending complaints on sewer/drainage lines, removing blockage in Drainage/ sewer lines, Gully traps, Manholes and Septic tanks etc. to ESI Hospital and staff quarters at Thottada, Kannur and Branch Office,Dispensary at Pappinisseri,kannur. And other works entrusted to Beldars when works assigned as sewer man are free and as directed by the Engineer in charge. |
| 4 | Helper for plumber in one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week. |
| 5 | Engaging helper for assisting plumber/Carpenter/Aluminium Fabricator/ welder and other similar trades-men in attending the day to day complaints of all sorts of Internal water supply/External water supply/sanitary installations, Assisting carpenter in repair works, cleaning open area in campus, Assisting sewer man in clearing blockages/ clearing silting storm water drains including removing and replacing RCC covers, removing growth of baniyan tree on buildings, cleaning Terrace water tanks, Over head tanks, underground sumpsand cutting/Pruning branches of trees up to 20 cm in diameter etc. to ESI Hospital and staff quarters at Thottada, Kannur and Branch Office,Dispensary at Pappinisseri,kannur. . (Note: Beldar is notto be specifically attached with any skilled worker and suppose to attend all woks assigned to him and as directed by the Engineer in charge) |
| 6 | General helper for (male mazdoor) in one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week |
| 7 | Engaging Skilled Carpenter/ Aluminium Fabricator with necessary tools and miscellaneous fittings such as screws and sleeves etc. in attending complaints regarding all steel/wooden/Aluminium doors, windows /partitions in the ESI Hospital and staff quarters at Thottada, Kannur and Branch Office,Dispensary at Pappinisseri,kannur |
| 8 | In one shift from 9 AM to 5 PM on daily basis as and when required by the Engineer in charge. |
| 9 | 6 mm cement plaster of mix |
| 10 | 1:3 (1 cement : 3 fine sand) |
| 11 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 12 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 13 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 14 | Bars upto 12 mm diameter |
| 15 | Bars above 12 mm diameter |
| 16 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 17 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 18 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 19 | 12mm-25 mm average thickness |
| 20 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 21 | One coat |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 23 | One or more coats on old work |
| 24 | Cleaning of open well of size beyond 6 m dia and upto 24 m depth including disposal of silt and rubbish after bailing out water by pumping and bottom shall be cleaned, the entire surface area shall then scrubbed thoroughly with wire brush and pressure washed with water including cost of hire charges of pump sets, life saving equipments, all tools and plants, labour and transportation charges etc and as directed by the Engineer in charge. |
| 25 | Supplying miscellaneous fittings for plumber of approved quality including cartage to site excluding the labour charges which are paid under item no 1 to 5. |
| 26 | Brass bib cock 15 mm (400 gm ) |
| 27 | Brassstopcock 15 mm (400 gm ) |
| 28 | CI cover 300*300 mm without frame (4.50Kg) |
| 29 | CI cover 615*450 mm without frame ( 23 Kg) |
| 30 | C.I. grating 150 mm dia, weighing not less than 440 gm |
| 31 | PTMT grating 100 mm dia |
| 32 | SCI gully/Nahni grating 100 mm |
| 33 | White vitreous EWC Pan of approved make |
| 34 | White vitreous china Wash Basin 630*450 mm or nearest size |
| 35 | Brass full way valve with C.I. wheel (screwed end) 40 mm dia |
| 36 | Gun Metal Non return Valve 40 mm |
| 37 | Gun Metal Non return Valve 50 mm |
| 38 | CP brass waste coupling 32 mm |
| 39 | CP brass waste coupling 40 mm |
| 40 | CP brass Bib cock15 mm ( 400gm) |
| 41 | CP brass long body Bib cock15 mm ( 690gm) |
| 42 | CP Brass Angle valve 15 mm ( 400 gm) |
| 43 | PVC automatic flushing cistern 10 liters capacity |
| 44 | CP Brass withelbow operation leverbib cock15 mm |
| 45 | PTMT Bib cock 15 mm |
| 46 | CPVC pipe 15 mm dia including all fittings |
| 47 | CPVC pipe 25 mm dia including all fittings |
| 48 | CPVC pipe 40 mm dia including all fittings |
| 49 | CPVC pipe 50 mm dia including all fittings |
| 50 | Plastic seat with lid / brass hinges for EWC |
| 51 | Polyethylene water storage Sintex/Aqua ISI marked tank with cover and suitable locking arrangement with inlet and outlet regulatory valves. |
| 52 | CP brass pillar tap for wash basins weighing not less than 690 gm |
| 53 | Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore |
| 54 | Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia |
| 55 | Mirror of superior make glass 60x45 cm |
| 56 | Rach bolt |
| 57 | CP brass health faucet 15mm |
| 58 | Siphoning set with rubber washer |
| 59 | 15 mm dia PVC pipes @ 10 kg/cm2 including all fittings |
| 60 | 25 mm dia PVC pipes @10kg/cm2 including all fittings |
| 61 | 50mm dia PVC pipes @ 6 kg/cm2 including all fittings |
| 62 | 75 mm dia PVC pipes @6kg/cm2 including all fittings |
| 63 | 110 mm dia PVC pipes @6kg/cm2including all fittings |
| 64 | 25 x 20 GI bush |
| 65 | Spindle consealed |
| 66 | 15mm PVC taps |
| 67 | CP Hex Nipple 15 mm |
| 68 | CP TEE 15mm |
| 69 | PVC Pillar cock |
| 70 | 15 mm long body pvc tap |
| 71 | PVC multi floor trap |
| 72 | Silicone Sealant |
| 73 | Supplying miscellaneous fittings for Carpenter of approved quality including cartage to site excluding the labour charges which are paid under item no 1 to 5. |
| 74 | Oxidized Mild steel butt hinges 125*65*2.12 mm |
| 75 | Oxidized Mild steel butt hinges 75*47*1.70 mm |
| 76 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm ( ISI ) |
| 77 | Anodised Aluminium handles 100 mm with plate 150 x 32 mm (ISI) |
| 78 | Anodised Aluminium handles 75mm with plate 125 x 32 mm (ISI) |
| 79 | Anodised Aluminium Tower Bolts (ISI) 250*10 mm |
| 80 | Anodised Aluminium Tower Bolts (ISI) 200*10 mm |
| 81 | Anodised Aluminium Tower Bolts (ISI) 150*10 mm |
| 82 | Anodised Aluminium Tower Bolts (ISI) 100*10 mm |
| 83 | Float glass panes 4 mm thick (10 kg/sqm) cut to size including wastage |
| 84 | Anjili/Jack wood in scantlings (excluding wastage to be measured) |
| 85 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 86 | Hydraulic door closer Tubular type Aluminiumsection body |
| 87 | 100 mm mortice lock with 6 levers for aluminium door |
| 88 | Aluminium Grill as per IS 1868 ( excluding wastage to be measured) |
| 89 | Prelaminated Particle Board both side decorative lamination Exterior grade 12 mm ( excluding wastage to be measured) |
| 90 | Dash fastener/Chemical fastener for aluminium work |
| 91 | Powder Coated Aluminium sections ( used at site excluding wastage) |
| 92 | Brass hard drawn hooks and eyes 150 mm |
| 93 | Brass hard drawn hooks and eyes 100 mm |
| 94 | G.I fasteners 100 x 8 mm |
| 95 | Brass cup board locks 6 levers 65 mm |
| 96 | Credit for dismantled materials (payment to be made to ESIC in lieu of dismantled materials available while replacing with new fittings). |
| 97 | Brass bib cock 15 mm |
| 98 | brass stop cock 15 mm |
| 99 | CP brass angle valve 15 mm |
| 100 | Gun metal valves- 20 mm nominal bore |
| 101 | Gun metal valves- 25 mm nominal bore |
| 102 | Gun metal valves-32 mm nominal bore. |
| 103 | Gun metal valves-40 mm nominal bore |
| 104 | Gun metal valves-50 mm nominal bore |
| 105 | 15 mm nominal outer dia GI pipe |
| 106 | 20 mm nominal outer dia GI pipe |
| 107 | 25 mm nominal outer dia GI pipe |
| 108 | 32 mm nominal outer dia GI pipe |
| 109 | 40 mm nominal outer dia GI pipe |
| 110 | CP Brass pillar taps 15 mm |
| 111 | CI cover 300*300 mm without frame (4.50 Kg) |
| 112 | CI cover 610*450 mm without frame ( 23 Kg) |
| 113 | CI gratings 150*150 mm |
| 114 | SCI gully/Nahni grating 100 mm |
| 115 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 116 | Brass full way valve with C.I. wheel (screwed end) 40 mm dia |
| 117 | Brass full way valve with C.I. wheel (screwed end) 75 mm dia |
| 118 | Gun Metal Non return Valve 40 mm |
| 119 | Gun Metal Non return Valve 50 mm |
| 120 | CP brass Bib cock15 mm ( 400gm) |
| 121 | CP brass long body Bib cock15 mm ( 690gm) |
| 122 | CP Brass Angle valve 15 mm ( 400 gm) |
| 123 | CP Brass withelbow operation leverbib cock15 mm |
| 124 | CP brass pillar tap for wash basins weighing not less than 690 gm |
| 125 | Hydraulic door closer Tubular type Aluminiumsection body |
| 126 | 100 mm mortice lock with 6 levers for aluminium door |
| 127 | Aluminium Grill as per IS 1868 ( excluding wastage to be measured) |
AI Tender Summary
Tender Timeline
Apr 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender