Tender For E-Quotation For Seeking Firm Rates For Non-Schedule Items For Preparing Estimates.Annual Repair And Maintenance Of Water Supply System And Sanitation At T.B. Sanatorium Itki Under D.W. & S. Mechanical Division Ranchi., ranchi-Jharkhand

E-quotation for seeking firm rates for non-schedule items for preparing estimates.Annual repair and maintenance of water supply system and sanitation at T.B. Sanatorium ITKI under D.W. & S. Mechanical Division Ranchi. Annual Repair And Maintenance Of Water Supply System And Sanitation At T.B. Sanatorium Itki Under D.W. And S. Mechanical Division Ranchi. , Provision Leake Repairing Of Different And Size Of Upvc Sch- 80 Pipe In Place Of Existing / Cracked And Damaged Pipe Of Isi Approved Make Or Equivalent Make Damaged Pipe In Trenchage And Replacement Of Pipe And Fitting So As To Give. I M Average Cover Over The Socket Of Pipes With Disposal Of Excavated Earth Within Initial Lead And Lift And Necessary Fitting And Earth Work In Backfilling And Cutting Pipe To Size Etc. All Complete As Per Specification And Direction Of E / I. , Leakage In 50 Mm Dia Upvc Pipe , Leakage In 40 Mm Dia Upvc Pipe , Leakage In 32 Mm Dia Upvc Pipe , Leakage In 25 Mm Dia Upvc Pipe , Leakage In 20 Mm Dia Upvc Pipe , Provision Leake Repairing Of Different And Size Of Upvc Sch- 80 Pipe In Place Of Existing / Cracked And Damaged Pipe With Red Lead And Yarn Of Following Nominal Bore Screwed And Socketed Joints On Wall, Ceiling And Floor Including Supplying And Fitting On Wall Hooks Or Pipe Clamp Wooden Plugs, Cutting Pipe To Size And Threading Ends Where Necessary Etc. All Complete As Per Specification And Direction Of E / I. , Leakage In 50 Mm Dia Upvc Pipe , Leakage In 40 Mm Dia Upvc Pipe , Leakage In 32 Mm Dia Upvc Pipe , Leakage In 25 Mm Dia Upvc Pipe , Leakage In 20 Mm Dia Upvc Pipe , Supplying And Flaxing U-Pvc Ball Valve Of Approved Make All Complete As Per Direction Of E / I. , 50 Mm Dia U-Pvc Ball Valve , 40 Mm Dia U-Pvc Ball Valve , 32 Mm Dia U-Pvc Ball Valve , 25 Mm Dia U-Pvc Ball Valve , 20 Mm Dia U-Pvc Ball Valve , Supplying Of Materials For C.P. Bathroom Fitting ( As Per Schedule Rate ) To Consumrtion Day To Day Work. , 15Mm Dia C.P. Bib Cock ( Long Thread ) , 15Mm Dia C.P. Pillar Cock ( Long Thread ) , 15Mm Dia C.P. Angular Stop Cock ( Long Thread ) , 15Mm Dia Cp Basin Mixture , 15Mm Dia Cp Wall Mixture , Jet Sprey , Health Faucet , Bib Cock Spindle , A ) Medium Size , B ) Large Size , Mirror , Towel Rail , Soap Dish , 32Mm Dia Cp Waste :- , 32Mm Dia Pvc Waste Pipe 750Mm Long With Coupling :- , 100Mm Dia C.P. Jali :- , 15Mm Dia And 45Cm Long Pvc Connection Pipe :- , Sink Waste , Cistern Ball Cock , Cistern Handle , Pvc Water Storage Tank Cover ( 2000 / 1000 L ) , 25Mm Dia Ball Cock Set For Pvc Tank , Cammod Cover , M Seal , Waste Pipe Bundla , 10 Lit Pvc L / D Cistern , Flush Bend , Basin , Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Including Supplying Nails, Clips And Pvc Washer Cement & Yarn For Making Plumber Joints Properly Cutting Pipe To Sizes Including Earth Work Of Scaffolding Etc. Where Necessary Etc. All Complete As Per Specification And Direction Of E / I. , 100Mm Dia Pvc Sewer Pipe - , 75Mm Dia Pvc Sewer Pipe , Supplying And Fixing Pvc Fitting Of Approved Make Confirming To Isi Including Supplying Nails And Bobbins From Making Solvent Cement Solution Or Gasket Joints Including Earth Work Or Providing Scaffolding As The Case May Be All Complete As Per Specification And Direction Of E / I. , 110Mm Swr Nahani Trap - , 110Mm Swr Plain Bend - , 110Mm Swr Door Bend , 110Mm Swr Plain Tee - , 110Mm Swr Door Tee , 75Mm Swr Plain Bend - , 75Mm Swr Door Bend - , 75Mm Swr Plain Tee - , 75Mm Swr Door Tee - , Supplying All Materials , Labours, Tools And Equipment For Laying Upvc Pipesof Approved Make In Trenches With Upvc Solvent Solution With Socket And Screw Joints And Cutting Pipe As Per Size And Threading Ends Where Necessary Etc. All Complete As Per Specification And Direction Of E / I. ( In Trenches ) , 50Mm Dia. Upvc Schedule 80 Pipe- ( In Trenches ) [ Make-Supreme / Ashirwad / Paras ] , 25Mm Dia. Upvc Schedule 80 Pipe- ( In Trenches ) [ Make-Supreme / Ashirwad / Paras ] , 40Mm Dia. Upvc Schedule 80 Pipe- ( In Wall&Overground ) [ Make-Supreme / Ashirwad / Paras ] , Supplying And Fixing Upvc Fittings Of Approved Make All Complete As Per Specification And Direction Of E / I. , A ) Upvc Elbow ( 90 Degree ) 50Mm Dia. Upvc , 40Mm Dia Upvc , 25Mm Dia Upvc , B ) Tee Plain 50Mm Dia. Upvc , 40Mm Dia Upvc , 25Mm Dia Upvc , C ) Reducing Bush 50Mm X 25Mm Dia. Upvc. , 50Mm X 40Mm Dia Upvc , 40Mm X 25Mm Dia Upvc , D ) Reducing Tee 50Mm X 25Mm Dia. Upvc. , 40Mm Dia Upvc , 25Mm Dia Upvc , E ) Upvc Socket 50Mm Dia. Upvc , 40Mm Dia. Upvc , 25Mm Dia Upvc , F ) Union Socket ( Upvc ) 50Mm Dia. Upvc , 40Mm Dia Upvc , 25Mm Dia Upvc , Providing All Material, Equipment And Wash Out And Cleaning Of 2000 / 1000 Litre Pvc Water Storage Tank Including Rubbing The Wall Of Tank By The Help Of Coconut, Rushi And Bleaching Powder Their Washing By Clean Water All Complete As Per Direction Of E / I. , 3000 Litre Capacity Hdpe W / S / Tank 2 Time X 3000 Liter X 2 Nos. = 12000.00 Liter 2000 Litre Capacity Hdpe W / S / Tank 2 Time X 2000 Liter X 88 Nos. = 372000.00 Liter 1000 Litre Capacity Hdpe W / S / Tank 2 Time X 1000 Liter X 9 Nos. = 18000.00 Liter Total = 402000.00 Liter , 10 Hp C / F Pump Set , Cost For Complete Rewinding Of 10 H.P Sq. Cage Induction Motor Operated On 415V, 3 Phase, 50 C / S 1460 Rpm With Supply Fitting Of Super Enameled Copper Wire And Other Required Insulation Materials, Heating Assembly Of The Motor And Testing On Load ( Wt Of Burnt Coil 5.5 Kg ) , Cost For Dismantling Of 10 H.P C / F Pump Checking And Changing Of Its Damaged Parts Such As Pump Shaft Of En-9 Materials -01 No. Key-02 Nos. Gland Tightner -2 Sets, Gland Tightner Stud-4 Nos. C.I Bearing Housing With Cap -2 Sets, Ball Bearing 6306 ( Skf ) -2 Nos. Casing Stud- 16 Mm Sq. X 80 Mm Long With Nut -8 Nos. Packing Paper. Grease, Gland Packing Etc All Complete And Testing On Load. , Cost For Supply And Fitting Of 3 Dia Tyre Coupling Complete Set With Nut, Bolt & Tyre. All Complete. , Cost For Supply And Fitting Of 4 Dia G.M Flap Tyre Foot Valve With Packing And Nut & Bolt -4 Nos. Etc All Complete. , Cost For Supply And Fitting Of 3 Dia Cidf Heavy Duty Sluice Valve, Isi Marked , Cost For Overhauling And Repairing Of Motor Control Panel And Changing Of Its Damaged Parts Such As Contactor ( Ml-4 ) - 3 Nos., Vm-02 Nos., Am-01, Selector Switch -2 Nos, 100 Amp Mccb – 1 No, Etc All Complete And Testing On Load. , 3 H.P. Submersible P / Set , Providing All Labour, Tools, Tackles And Technicians For Taking Out 3 H.P. Submersible Pump Set With Column Pipe For Bore Well , Cost Towards For Rewinding And Repairing Of 3 H.P Submersible Motor With S / F Suitable Winding Wire, Bronze Bush Etc. All Complete After The Deduction Of Cost Of Scrape Materials. , Cost Towards Repairing Of 3 H.P. Submersible Pump With S / F Bronze Impeller As Per Size And Sample, Bush, Thrust Plate, Pump Shaft Etc. All Complete After The Deduction Of Cost Of Scrape Materials. , Cost Towards Replacement Of Damaged Submersible Cable By Supplying And Fitting 2.5 Mm2x 3 Core Flat Submersible Cable Including Cable Jointing All Complete For Both Set. After The Deduction Of Cost Of Scrape Materials. , Cost Towards Supplying Fitting, Changing 2” Dia G.I. Column Pipe With Heavy Duty Socket ( Make Zindal / Tata ) After The Deduction Of Cost Of Scrape Materials. , Cost Towards Supplying And Fitting ( 1 ) 2 Dia G.M. Full Way Valve – 1 No ( 2 ) 2 Dia Nr Valve – 1 No ( 3 ) 2 Dia G.I. Bend 2 Nos. ( 4 ) 2” Dia M.S. Clamp With Nut Bolt 2 Pair After The Deduction Of Cost Of Scrape Materials. , Providing All Labour, Tools Tackles And Technicians For Lowering Of 3 H.P Submersible Pump Set With All Accessories In The Bore Well , 5 H.P. / 7.5 H.P. Submersible P / Set , Providing All Labour, Tools, Tackles And Technicians For Taking Out 5 H.P. Submersible Pump Set With Column Pipe ( 280 ) From Bore Well , Cost Towards For Rewinding And Repairing Of5 Hp Submersible Motor With S / F 1.0 Swg Round Copper Winding Wire 24 Slot, Gun Metal Bush, Thrust Plate, Thrust Bearing, Diapharm, Oil Seal, Etc With Lathe Work. All Complete. After The Deduction Of Cost Of Scrape Materials. , Cost Towards Repairing Of 5 Hp Submersible Pump With S / F Noryl Impeller As Per Size And Sample, Diffuser, S.S. Shaft, S.S. Coupling, S.S. Sleeve, Nut, C.I Nrv Etc. All Complete ( 23 Stage ) After The Deduction Of Cost Of Scrape Materials. , Cost Towards Replacement Of Damaged Submersible Cable By Supplying And Fitting 4 Mm2x 3 Core Flat Submersible Cable Including Cable Jointing All Complete. After The Deduction Of Cost Of Scrape Materials. , Cost Towards Supplying Fitting, Changing 2” Dia G.I. Column Pipe With Heavy Duty Socket ( Make Zindal / Tata ) After The Deduction Of Cost Of Scrape Materials. , Cost Towards Supplying And Fitting ( 1 ) 50 Mm Dia G.M. Full Way Valve – 2 No ( 2 ) 50 Mm Dia Nr Valve – 1 No ( 3 ) 50 Mm Dia G.I. Bend ( 4 ) 2” Dia M.S. Clamp With Nut Bolt – 2 Pair After The Deduction Of Cost Of Scrape Materials. , Supplying And Laying Ground And On Wall 10 Swg, G.I. Wire For Doing Continuous Earthing For All Electrical Equipments , Providing All Labour, Tools Tackles And Technicians For Lowering ( 280 ) Of 5 H.P.Submersible Pump Set With All Accessories In The Bore Well , Supplying And Installation Suitable Size Panel Board For 5 H.P. Submersible Pump Including Fixing On Wall Comparising Of Following Points Such As ( 1 ) D.O.L Starter – 1 No. ( 2 ) Hrc Fuse – 3 No. ( 3 ) Volt Meter With Selector Witch -1 Set ( 4 ) Ammeter With Selection Switch – 1 Set ( 5 ) Zindicating Neon Lamp – 3 No. Etc. All Complete After The Deduction Of Cost Of Scrape Materials.

Refer document

Refer document

Refer document

Name of Work: E-quotation for seeking firm rates for non-schedule items for preparing estimates.Annual repair and maintenance of water supply system and sanitation at T.B. Sanatorium ITKI under D.W. & S. Mechanical Division Ranchi.

Sl. No.	Item Description
1	Provision leake repairing of different and size of UPVC Sch- 80 pipe in place of existing / cracked and damaged pipe of ISI approved make or equivalent make damaged pipe in trenchage and replacement of pipe and fitting so as to give. I m average cover over the socket of pipes with disposal of excavated earth within initial lead and lift and necessary fitting and earth work in backfilling and cutting pipe to size etc. all complete as per specification and direction of E/I.
2	leakage in 50 mm dia UPVC pipe
3	leakage in 40 mm dia UPVC pipe
4	leakage in 32 mm dia UPVC pipe
5	leakage in 25 mm dia UPVC pipe
6	leakage in 20 mm dia UPVC pipe
7	Provision leake repairing of different and size of UPVC Sch- 80 pipe in place of existing / cracked and damaged pipe with red lead and yarn of following nominal bore screwed and socketed joints on wall, ceiling and floor including supplying and fitting on wall hooks or pipe clamp wooden plugs, cutting pipe to size and threading ends where necessary etc. all complete as per specification and direction of E/I.
8	leakage in 50 mm dia UPVC pipe
9	leakage in 40 mm dia UPVC pipe
10	leakage in 32 mm dia UPVC pipe
11	leakage in 25 mm dia UPVC pipe
12	leakage in 20 mm dia UPVC pipe
13	Supplying and flaxing U-PVC Ball Valve of approved make all complete as per direction of E/I.
14	50 mm dia U-PVC Ball Valve
15	40 mm dia U-PVC Ball Valve
16	32 mm dia U-PVC Ball Valve
17	25 mm dia U-PVC Ball Valve
18	20 mm dia U-PVC Ball Valve
19	Supplying of materials for C.P. bathroom fitting (As per schedule rate) to consumrtion day to day work.
20	15mm dia C.P. bib cock (Long thread)
21	15mm dia C.P. Pillar cock (Long thread)
22	15mm dia C.P. Angular stop cock (Long thread)
23	15mm dia CP Basin Mixture
24	15mm dia CP Wall Mixture
25	Jet Sprey
26	Health Faucet
27	Bib Cock Spindle
28	a)      Medium Size
29	b)      Large Size
30	Mirror
31	Towel Rail
32	Soap Dish
33	32mm dia CP Waste :-
34	32mm dia PVC waste pipe 750mm long with coupling :-
35	100mm dia C.P. Jali :-
36	15mm dia and 45cm long PVC Connection Pipe :-
37	Sink Waste
38	Cistern Ball Cock
39	Cistern Handle
40	PVC water storage tank cover (2000/1000 L)
41	25mm dia Ball Cock Set for PVC Tank
42	Cammod Cover
43	M Seal
44	Waste pipe bundla
45	10 Lit PVC L/D Cistern
46	Flush Bend
47	Basin
48	Supplying, fitting and fixing PVC pipes of approved make including supplying nails, clips and PVC washer cement & yarn for making plumber joints properly cutting pipe to sizes including earth work of scaffolding etc. where necessary etc. all complete as per specification and direction of E/I.
49	100mm dia PVC Sewer Pipe -
50	75mm dia PVC Sewer Pipe
51	Supplying and fixing PVC fitting of approved make confirming to ISI including supplying nails and bobbins from making solvent cement solution or gasket joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.
52	110mm SWR Nahani trap -
53	110mm SWR Plain bend -
54	110mm SWR Door bend
55	110mm SWR Plain Tee -
56	110mm SWR Door Tee
57	75mm SWR Plain bend -
58	75mm SWR Door bend -
59	75mm SWR Plain Tee -
60	75mm SWR Door Tee -
61	Supplying all materials ,labours, tools and equipment for laying UPVC pipesof approved make in trenches with UPVC Solvent solution with socket and screw joints and cutting pipe as per size and threading ends where necessary etc. all complete as per specification and direction of E/I. (In trenches)
62	50mm dia. UPVC schedule 80 pipe- (In Trenches) [Make-Supreme/Ashirwad/PARAS]
63	25mm dia. UPVC schedule 80 pipe- (In Trenches) [Make-Supreme/Ashirwad/PARAS]
64	40mm dia. UPVC schedule 80 pipe- (In wall&overground) [Make-Supreme/Ashirwad/PARAS]
65	Supplying and fixing UPVC fittings of approved make all complete as per specification and direction of E/I.
66	a) UPVC Elbow (90 degree) 50mm dia. UPVC
67	40mm dia UPVC
68	25mm dia UPVC
69	b) Tee Plain 50mm dia. UPVC
70	40mm dia UPVC
71	25mm dia UPVC
72	c) Reducing Bush 50mm x 25mm dia. UPVC.
73	50mm x 40mm dia UPVC
74	40mm x 25mm dia UPVC
75	d) Reducing Tee 50mm x 25mm dia. UPVC.
76	40mm dia UPVC
77	25mm dia UPVC
78	e) UPVC Socket 50mm dia. UPVC
79	40mm dia. UPVC
80	25mm dia UPVC
81	f) Union Socket (UPVC) 50mm dia. UPVC
82	40mm dia UPVC
83	25mm dia UPVC
84	Providing all material, equipment and wash out and cleaning of 2000/1000 litre PVC water storage tank including rubbing the wall of tank by the help of coconut, rushi and bleaching powder their washing by clean water all complete as per direction of E/I.
85	3000 litre capacity HDPE W/S/Tank 2 time X 3000 Liter X 2 Nos. = 12000.00 Liter 2000 litre capacity HDPE W/S/Tank 2 time X 2000 Liter X 88 Nos. = 372000.00 Liter 1000 litre capacity HDPE W/S/Tank 2 time X 1000 Liter X 9 Nos. = 18000.00 Liter Total = 402000.00 Liter
86	10 HP C/F Pump Set
87	Cost for complete rewinding of 10 H.P Sq. cage induction motor operated on 415V, 3 Phase, 50 C/S 1460 RPM with supply fitting of super enameled copper wire and other required insulation materials, heating assembly of the motor and testing on load ( wt of burnt coil 5.5 Kg)
88	Cost for dismantling of 10 H.P C/F Pump checking and changing of its damaged parts such as pump shaft of EN-9 materials -01 no. key-02 nos. gland tightner -2 sets, gland tightner stud-4 nos. C.I bearing housing with cap -2 sets, Ball bearing 6306 (SKF)-2 Nos. casing stud- 16 mm Sq. X 80 mm long with nut -8 nos. packing paper. grease, gland packing etc all complete and testing on load.
89	Cost for supply and fitting of 3" dia tyre coupling complete set with nut, bolt & Tyre. All complete.
90	Cost for supply and fitting of 4" dia G.M Flap tyre foot valve with packing and nut & bolt -4 nos. etc all complete.
91	Cost for supply and fitting of 3" dia CIDF heavy duty sluice valve, ISI marked
92	Cost for overhauling and repairing of motor control panel and changing of its damaged parts such as contactor (ML-4) - 3 nos., VM-02 nos.,Am-01, Selector switch -2 nos, 100 Amp MCCB – 1 no, etc all complete and testing on load.
93	3 H.P. Submersible P/Set
94	Providing all labour, tools, tackles and technicians for taking out 3 H.P. submersible pump set with column pipe for bore well
95	Cost towards for rewinding and repairing of 3 H.P submersible motor with S/F suitable winding wire,bronze bush etc. all complete after the deduction of cost of scrape materials.
96	Cost towards repairing of 3 H.P. submersible pump with S/F bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrape materials.
97	Cost towards replacement of damaged submersible cable by supplying and fitting 2.5 mm2X 3 core flat submersible cable including cable jointing all complete for both set. after the deduction of cost of scrape materials.
98	Cost towards supplying fitting, changing 2” dia G.I. Column pipe with heavy duty socket (make Zindal/TATA)after the deduction of cost of scrape materials.
99	Cost towards supplying and fitting (1) 2" dia G.M. full way valve – 1 no (2) 2" dia NR valve – 1 no (3) 2" dia G.I. bend 2 Nos. (4) 2” dia M.S. clamp with nut bolt 2 pair after the deduction of cost of scrape materials.
100	Providing all labour, tools tackles and technicians for lowering of 3 H.P Submersible pump set with all accessories in the bore well
101	5 H.P./ 7.5 H.P. Submersible P/Set
102	Providing all labour, tools, tackles and technicians for taking out 5 H.P. submersible pump set with column pipe (280") from bore well
103	Cost towards for rewinding and repairing of5 HP submersible motor with S/F 1.0 SWG Round Copper winding wire 24 Slot, Gun Metal Bush, thrust plate, Thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrape materials.
104	Cost towards repairing of 5 HP submersible pump with S/F noryl impeller as per size and sample, diffuser, S.S. shaft, S.S. coupling, S.S. sleeve, nut, C.I NRV etc. all complete (23 stage) after the deduction of cost of scrape materials.
105	Cost towards replacement of damaged submersible cable by supplying and fitting 4 mm2X 3 core flat submersible cable including cable jointing all complete. after the deduction of cost of scrape materials.
106	Cost towards supplying fitting, changing 2” dia G.I. Column pipe with heavy duty socket (make Zindal/TATA) after the deduction of cost of scrape materials.
107	Cost towards supplying and fitting (1) 50 mm dia G.M. full way valve – 2 no (2) 50 mm dia NR valve – 1 no (3) 50 mm dia G.I. bend (4) 2” dia M.S. clamp with nut bolt – 2 pair after the deduction of cost of scrape materials.
108	Supplying and laying ground and on wall 10 SWG, G.I. wire for doing continuous earthing for all electrical equipments
109	Providing all labour, tools tackles and technicians for lowering (280") of 5 H.P.Submersible pump set with all accessories in the bore well
110	Supplying and installation suitable size panel board for 5 H.P. submersible pump including fixing on wall comparising of following points such as (1) D.O.L starter – 1 no. (2) HRC fuse – 3 no. (3) volt meter with selector witch -1 set (4) Ammeter with selection switch – 1 set (5)Zindicating neon lamp – 3 no. Etc. All complete after the deduction of cost of scrape materials.