Public Health Engineering Department-PHED has published Tender For Fixing Of Rate Contract For Repairs/Replacement To Mechanical Equipment Installed At Different Wsss Of Phe Mechanical Sub-Division Pampore (District Pulwama) For The Financial Year 2023-24. Submission Date for this Tender is 02-05-2023. Machine Tools Tenders in pampore Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-May-2023 | Corrigendum | Technical Bid | 02-05-2023 |
| Sl. No. | Item Description |
| 1 | Mechanical transportation, loading, unloading and handling of various items such as pump parts, motors, starters, voltage stabilizers, coil assemblies, welding tools & plant, etc. using appropriate means of transport as under: |
| 2 | Private car, auto-rickshaw or similar with 1.0 km lead |
| 3 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 4 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 5 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 6 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 7 | Load carrier auto, mini van or similar with 1.0 km lead |
| 8 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 9 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 10 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 11 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 12 | Mini truck like Tata mobile, Bolero Camper or similar with 1.0 km lead |
| 13 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 14 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 15 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 16 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 17 | Truck, tipper or similar with 1.0 km lead |
| 18 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 19 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 20 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 21 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 22 | Head load carriage of machinery/ equipment at locations inaccessible by vehicles on plain/ rough terrain |
| 23 | Upto 50 kgs load |
| 24 | Extra for every additional 50kgs load (Note: Fraction >=25kgs shall be taken as equivalent to next load of 50kgs) |
| 25 | Extra for uphill terrain (Ground Slope >= 07 deg) |
| 26 | PUMPS Complete dismantling of VT pump by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts such as discharge and column pipes, shafts and couplings, bowl, suction bell, impeller, stuffing box, fasteners, etc. |
| 27 | Single stage pumps with single column pipe upto 300mm ND |
| 28 | Single stage pumps with single column pipe > 300mm upto 600mm ND |
| 29 | Single stage pumps with single column pipe > 600mm ND |
| 30 | Extra per additional stage over corresponding column pipe size rates above |
| 31 | Extra per additional column pipe over corresponding column pipe size rates above |
| 32 | Complete assembling of all VT pump parts after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 33 | Single stage pumps with single column pipe upto 300mm ND |
| 34 | Single stage pumps with single column pipe > 300mm upto 600mm ND |
| 35 | Single stage pumps with single column pipe > 600mm ND |
| 36 | Extra per additional stage over corresponding column pipe size rates above |
| 37 | Extra per additional column pipe over corresponding column pipe size rates above |
| 38 | Complete dismantling of single stage horizontal pump (all types) by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc. |
| 39 | Suction size upto 200mm |
| 40 | Suction size > 200mm upto 400mm |
| 41 | Suction size >400mm |
| 42 | Extra per additional stage over corresponding suction sizes above |
| 43 | Complete assembling of single stage horizontal pump (all types) after cleaning of all parts throughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 44 | Suction size upto 200mm |
| 45 | Suction size > 200mm upto 400mm |
| 46 | Suction size >400mm |
| 47 | Extra per additional stage over corresponding suction sizes above |
| 48 | Partial dismantling of VT pump by way of: Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts including discharge and column pipe, head and line shafts and couplings but excluding bowl assembly. |
| 49 | Pumps with single column pipe upto 300mm ND |
| 50 | Pumps with single column pipe > 300mm upto 600mm ND |
| 51 | Pumps with single column pipe > 600mm ND |
| 52 | Extra per additional column pipe over corresponding column pipe size rates above |
| 53 | Assembling of dismantled VT pump parts (excluding bowl assembly) after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. |
| 54 | Pumps with single column pipe upto 300mm ND |
| 55 | Pumps with single column pipe > 300mm upto 600mm ND |
| 56 | Pumps with single column pipe > 600mm ND |
| 57 | Extra per additional column pipe over corresponding column pipe size rates above |
| 58 | Removal of only stuffing box from the pump. |
| 59 | Fitting of only stuffing box to the pump. |
| 60 | Replacement of Driving End (DE) bearing of horizontal/ vertical pump by way of: Uncoupling of motor from the pump, isolating of DE bearing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of pump parts, coupling and alignment with the pump. The job includes load testing of pump. |
| 61 | Suction size upto 200mm |
| 62 | Suction size > 200mm upto 400mm |
| 63 | Suction size >400mm |
| 64 | Replacement of Non-Driving End (NDE) bearing of horizontal pump by way of: Opening the end cover of NDE bearing housing. Carefully extracting the old damaged bearing from the housing with the help of bearing puller, etc and fitting of new bearing in its place. Refitting back of pump parts, coupling and alignment with the pump. The job includes load testing of pump. |
| 65 | Suction size upto 200mm |
| 66 | Suction size > 200mm upto 400mm |
| 67 | Suction size >400mm |
| 68 | Extraction of submersible pump/motor set along with column pipes from the well by hoisting with tripod and chain pulley block and by using tools and tackles required for extraction of pump set and uncoupling the pump and motor |
| 69 | Column pipes upto 100mm NB and 50mtr depth |
| 70 | For depths exceeding 50m |
| 71 | Extra over corresponding depth level for pipes >100mm NB |
| 72 | Assembling of submersible pump/ motor set and lowering along with column pipes in the well by chain pulley block, tripod, tools and tackles and testing on full load at site. |
| 73 | Column pipes upto 100mm NB and 50mtr depth |
| 74 | For depths exceeding 50m |
| 75 | Extra over corresponding depth level for pipes >100mm ND |
| 76 | VALVES Removal from piping system and complete dismantling of various type of valves such as foot valves/ butterfly valves/ NRVs/ check valves/ sluice valves (without spur gear mechanism) by way of disassembling of parts, etc. |
| 77 | < 100mm nominal size |
| 78 | >=100mm upto 200mm nominal size |
| 79 | > 200mm upto 350mm nominal size |
| 80 | >350mm upto 600mm nominal size |
| 81 | > 600mm nominal size |
| 82 | Assembling of all parts of dismantled valve, fitting in the piping system and testing. |
| 83 | < 100mm nominal size |
| 84 | >=100mm upto 200mm nominal size |
| 85 | > 200mm upto 350mm nominal size |
| 86 | >350mm upto 600mm nominal size |
| 87 | > 600mm nominal size |
| 88 | Disassembling of operating mechanism of large sized valves to isolate the thrust bearing and removing it, cleaning of housing, fitting of bearing, reassembling of all parts and testing. The job is inclusive of hoisting arrangements required for execution of work. |
| 89 | Partial dismantling of various types of valves such as NRVs, sluice valves, butterfly valves, flap valves, etc. for repairs or replacement of parts such as hinge pin/ seat ring/ disc face/ hinge repairs, etc. and reassembling of all parts of dismantled valve and testing. |
| 90 | <100mm nominal size |
| 91 | >=100mm upto 200mm nominal size |
| 92 | >200mm upto 350mm nominal size |
| 93 | >350mm upto 600mm nominal size |
| 94 | > 600mm nominal size |
| 95 | Complete removal of foot valve (all sizes) from the pump suction system and refitting and testing after carrying out the requisite works but excluding the cost of repairs/ replacements carried out on the foot valve |
| 96 | POLES Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 97 | Erection of metallic pole of following lengths in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) standard/ suitable foundation including excavation and refilling etc. as required. |
| 98 | Above 4.5 meter and upto 6.5 meter |
| 99 | Above 6.5 meter and upto 8.0 meter |
| 100 | Above 8.0 meter and upto 10.0 meter |
| 101 | Above 10.00 meter and upto 12.00 meter |
| 102 | PUMP PARTS Fabrication, providing and fitting of GM bush to bell mouth/ bowl unit/ stuffing box/ sleeve, or similar as per sample having finished weight as under: |
| 103 | upto 1.0 kg |
| 104 | Extra per kg >1.0 kg upto 2.5 kgs |
| 105 | Extra per kg >2.5kgs upto 5.0 kgs |
| 106 | Extra per kg > 5.0 kgs |
| 107 | Fabrication, providing and fitting of GM bush with rubber insert (Cutlass bearing) to bowl housing/ bearing retainer, etc as per sample having finished weight as under: |
| 108 | upto 1.0 kg |
| 109 | Extra per kg >1.0 kg upto 2.5 kgs |
| 110 | Extra per kg >2.5kgs upto 5.0 kgs |
| 111 | Extra per kg > 5.0 kgs |
| 112 | Fabrication, providing and fitting of GM lantern (cooling) ring for stuffing box as per sample having finished weight as under: |
| 113 | upto 1.0 kg |
| 114 | Extra per kg >1.0kgs upto 2.0 kgs |
| 115 | Extra per kg > 2.0 kgs |
| 116 | Providing and fitting of GM split gland as per sample having finished weight as under: |
| 117 | upto 1.0 kg |
| 118 | Extra per kg >1.0 kg upto 2.5 kgs |
| 119 | Extra per kg >2.5kgs upto 4.0 kgs |
| 120 | Extra per kg > 4.0 kgs |
| 121 | Fabrication, turning and finishing (on inside and outside) of Stainless steel(AISI-410 or IS 1030) muff coupling, etc. as per old sample having finished weight as under: |
| 122 | Fabrication, turning and finishing of specified Stainless Steel (AISI-410 or IS 1570) shaft of specified dimensions with end preparation (threaded, etc.), keyway as per old sample having finished weight as under: |
| 123 | upto 20.0 kg |
| 124 | Extra per kg >20.0 kg upto 40 kgs |
| 125 | Extra per kg >40kgs upto 60 kgs |
| 126 | Extra per kg > 60 kgs |
| 127 | Fabrication, turning and finishing (on inside and outside) of Stainless steel(IS 1030) shaft coupling, etc. as per old sample having finished weight as under: |
| 128 | Fabrication, turning, finishing and fitting of Stainless steel (AISI-410 or IS 1570)shaft sleeve as per old sample, etc. having finished weight as under: |
| 129 | Manufacturing, finishing, providing of SS (AISI 410 or IS 1570) key/ impeller lock collet as per available sample and slot size. |
| 130 | Fabrication, turning and threading of Stainless steel shaft stud as per old sample etc. |
| 131 | Manufacturing, providing and fitting of SS (IS 1030) check nut/ impeller adjusting nut with proper locking arrangement as per sample available. |
| 132 | Providing and fitting of Cast Iron split gland as per sample: |
| 133 | upto 1.0 kg |
| 134 | Extra per kg >1.0 kg upto 2.5 kgs |
| 135 | Extra per kg >2.5kgs upto 5.0 kgs |
| 136 | Extra per kg > 5.0 kgs |
| 137 | Fabrication, providing and fitting of GM/bronze impeller wear ring/ seal ring/ sand collar |
| 138 | upto 1.0 kg |
| 139 | Extra per kg >1.0 kg upto 2.5 kgs |
| 140 | Extra per kg >2.5kgs upto 5.0 kgs |
| 141 | Extra per kg > 5.0 kgs |
| 142 | Fabrication, providing and fitting of CI Casing ring |
| 143 | upto 1.0 kg |
| 144 | Extra per kg >1.0 kg upto 2.5 kgs |
| 145 | Extra per kg >2.5kgs upto 5.0 kgs |
| 146 | Extra per kg > 5.0 kgs |
| 147 | Fabrication, providing and fitting of MS strainer for suction bell, etc. The strainer shall be applied with one coat of approved metal primer and two coats of anticorrosive bituminous paint to give an even shade. |
| 148 | Rethreading of bolt hole using appropriate tap drill |
| 149 | upto M12 size hole/ bore |
| 150 | > M12 size hole/ bore |
| 151 | Repairs to damaged SS shaft by way of rebuilding of shaft using high quality SS electrodes (Ador/ Advani/ ESAB makes) and then turning the shaft on lathe machine to remove the excess material deposited and restore the original dimensions and profile of the shaft. |
| 152 | Shaft upto 50mm diameter at one damaged spot on shaft length |
| 153 | Extra for each subsequent damaged spot over the corresponding diameter upto 50mm |
| 154 | Shaft of more than 50mm diameter at one damaged spot on shaft length |
| 155 | Extra for each subsequent damaged spot over the corresponding diameter above 50mm |
| 156 | Repairs to the existing damaged SS shaft end by way of rebuilding using high quality SS electrodes (Ador/ Advani/ ESAB makes) and then turning the shaft on lathe machine to remove the excess material deposited. The job includes threading or collar rebuilding and facing, etc. as per requirement and restore the original dimensions and profile of the shaft. |
| 157 | Shaft upto 50mm diameter at one damaged spot on shaft end |
| 158 | Extra for each subsequent damaged spot over the corresponding diameter upto 50mm |
| 159 | Shaft of more than 50mm diameter at one damaged spot on shaft end |
| 160 | Extra for each subsequent damaged spot over the corresponding diameter above 50mm |
| 161 | COUPLINGS Providing and fitting bush type flexible coupling with finished bore and keyway of following designations (Preferred make: Fenner/ Lovejoy/ or equivalent makes and designations) |
| 162 | FBC-1 (max. bore upto 28mm) |
| 163 | FBC-2 (max. bore upto 30mm) |
| 164 | FBC-2A (max. bore upto 42mm) |
| 165 | FBC-3 (max. bore upto 48mm) |
| 166 | FBC-4 (max. bore upto 65mm) |
| 167 | FBC-4A (max. bore upto 65mm) |
| 168 | FBC-5 (max. bore upto 75mm) |
| 169 | FBC-6 (max. bore upto 95mm) |
| 170 | FBC-6A (max. bore upto 95mm) |
| 171 | FBC-6B (max. bore upto 95mm) |
| 172 | FBC-7 (max. bore upto 15mm) |
| 173 | FBC-7A (max. bore upto 120mm) |
| 174 | FBC-8 (max. bore upto 130mm) |
| 175 | FBC-8A (max. bore upto 135mm) |
| 176 | FBC-8B (max. bore upto 140mm) |
| 177 | FBC-9 (max. bore upto 150mm) |
| 178 | FBC-9A (max. bore upto 160mm) |
| 179 | FBC-10 (max. bore upto 170mm) |
| 180 | FBC-10A (max. bore upto 180mm) |
| 181 | FBC-11 (max. bore upto 190mm) |
| 182 | Providing and fitting of rubber bush for bush type flexible couplings as under: |
| 183 | FBC-1 upto FBC-2A |
| 184 | FBC-3 upto FBC-8A |
| 185 | FBC-8B upto FBC-11 |
| 186 | Providing and fitting of pin for bush type flexible couplings as under: |
| 187 | FBC-1 upto FBC-2A |
| 188 | FBC-3 upto FBC-7 |
| 189 | FBC-7A upto FBC-8A |
| 190 | FBC-8B upto FBC-10 |
| 191 | FBC-10A upto FBC-11 |
| 192 | Providing and fitting flexible tyre coupling with finished bore and keyway of following designations as per IS 14285: (Note: Number in designation indicates dim. "A" approx tyre outer dia) |
| 193 | TC-104 (TC-007) |
| 194 | TC-133 (TC-009) |
| 195 | TC 165 (TC-0012) |
| 196 | TC-197 (TC-0013) |
| 197 | TC-211 (TC-0014) |
| 198 | TC-235 (TC-0015) |
| 199 | TC-254 (TC-0016) |
| 200 | TC-279 (TC-0017) |
| 201 | TC-314 (TC-0019) |
| 202 | TC-359 (TC-0020/21) |
| 203 | TC-402 (TC-0022) |
| 204 | TC-470 (TC-0023) |
| 205 | TC-508 (TC-0024) |
| 206 | TC-562 (TC-0025) |
| 207 | TC-628 |
| 208 | Providing and fitting spare tyre for tyre coupling of following designations as per IS 14285: |
| 209 | TC-104 (TC-007) |
| 210 | TC-133 (TC-009) |
| 211 | TC 165 (TC-0012) |
| 212 | TC-197 (TC-0013) |
| 213 | TC-211 (TC-0014) |
| 214 | TC-235 (TC-0015) |
| 215 | TC-254 (TC-0016) |
| 216 | TC-279 (TC-0017) |
| 217 | TC-314 (TC-0019) |
| 218 | TC-359 (TC-0020/21) |
| 219 | TC-402 (TC-0022) |
| 220 | TC-470 (TC-0023) |
| 221 | TC-508 (TC-0024) |
| 222 | TC-562 (TC-0025) |
| 223 | TC-628 |
| 224 | FASTENERS Providing of high tensile steel hexagonal bolts |
| 225 | M6 x 50 |
| 226 | M8 x 80 |
| 227 | M10 x 80 |
| 228 | M12 x 80 |
| 229 | M14 x 90 |
| 230 | M16 x 100 |
| 231 | M18 x 50 |
| 232 | M18 x 125 |
| 233 | M18 x 150 |
| 234 | M20 x 100 |
| 235 | M22 x 90 |
| 236 | M22 x 125 |
| 237 | M22 x 150 |
| 238 | M24 x 90 |
| 239 | M24 x 100 |
| 240 | M24 x 150 |
| 241 | M27 x 120 |
| 242 | M30 x 110 |
| 243 | Providing of hexagonal nuts of suitable pitch with sizes as under: |
| 244 | M6 |
| 245 | M8 |
| 246 | M10 |
| 247 | M12 |
| 248 | M14 |
| 249 | M16 |
| 250 | M18 |
| 251 | M20 |
| 252 | M22 |
| 253 | M24 |
| 254 | M27 |
| 255 | M30 |
| 256 | Providing and fitting of carbon steel Fasteners of assorted sizes |
| 257 | Fabrication, providing and fitting of SS/ alloy steel hinge pin for all types of valves, etc. as per old sample but excluding the cost of extracting the old pin and dismantling/reassembling the valve, etc. |
| 258 | Fabrication & providing of new bronze body seat ring/ bronze wedge facing ring/ bronze stem nut/ float guide as per sample for various valves but excluding cost of dismantling the valve parts |
| 259 | upto 1.0 kg |
| 260 | Extra per kg >1.0 kg upto 2.5 kgs |
| 261 | Extra per kg >2.5kgs upto 4.0 kgs |
| 262 | Providing and fitting of rubber gasket for various types of valves |
| 263 | Providing of jute/ hemp gland packing |
| 264 | Fabrication & providing of new SS stem nut/ stem-spindle/ pinion/ pinion shaft/ stub shaft (AISI-410 or IS 6603) for sluice/ butterfly or other type of valve as per old sample |
| 265 | upto 20.0 kg |
| 266 | Extra per kg >20.0 kg upto 40 kgs |
| 267 | Extra per kg >40kgs upto 60 kgs |
| 268 | Extra per kg > 60 kgs |
| 269 | FOOT VALVE Fabrication, providing and fitting of CI disc plate as per old sample |
| 270 | Providing of leather disc face washer for foot valve |
| 271 | Labour for fitting of washer to foot valve including removal of foot valve from suction line, extraction of old damaged washer, fitting of new (available) washer and refitting of foot valve to suction line. |
| 272 | Providing and fitting of screwed type GM foot valve conforming to IS-4038 of nominal size: |
| 273 | 15mm |
| 274 | 20mm |
| 275 | 25mm |
| 276 | 32mm |
| 277 | 40mm |
| 278 | FLANGES Providing and welding of steel plate flanges of nominal pressure rating 1.0MPa as per IS 6392 with nominal sizes as under: |
| 279 | 32mm |
| 280 | 40mm |
| 281 | 50mm |
| 282 | 65mm |
| 283 | 80mm |
| 284 | 100mm |
| 285 | 125mm |
| 286 | 150mm |
| 287 | 200mm |
| 288 | 250mm |
| 289 | 300mm |
| 290 | 350mm |
| 291 | Providing and welding of steel plate flanges of nominal pressure rating 1.6MPa as per IS 6392 with nominal sizes as under: |
| 292 | 32mm |
| 293 | 40mm |
| 294 | 50mm |
| 295 | 65mm |
| 296 | 80mm |
| 297 | 100mm |
| 298 | 125mm |
| 299 | 150mm |
| 300 | 200mm |
| 301 | 250mm |
| 302 | 300mm |
| 303 | 350mm |
| 304 | Providing and welding of steel plate blind flanges as per IS 6392 of nominal pressure rating 1.6MPa with nominal sizes as under: |
| 305 | 50mm |
| 306 | 65mm |
| 307 | 80mm |
| 308 | 100mm |
| 309 | 125mm |
| 310 | 150mm |
| 311 | 200mm |
| 312 | 250mm |
| 313 | 300mm |
| 314 | 350mm |
| 315 | GASKET Providing of natural rubber gasket for flanged joints with nominal sizes as under: |
| 316 | 32mm |
| 317 | 40mm |
| 318 | 50mm |
| 319 | 65mm |
| 320 | 80mm |
| 321 | 100mm |
| 322 | 125mm |
| 323 | 150mm |
| 324 | 200mm |
| 325 | 250mm |
| 326 | 300mm |
| 327 | 350mm |
| 328 | 400mm |
| 329 | Providing and fiiting of C classonforming to IS: 1239 of length 10 Rft into the 200/ 250/300 mm casing dia. production well |
| 330 | DN 50C(Heavy) pipe |
| 331 | DN65C(Heavy) pipe |
| 332 | DN80C(Heavy) pipe |
| 333 | Providing/supplying and fitting of G.I flanged Rising Main as per requirment |
| 334 | DN 50C (Heavy) pipe |
| 335 | DN65C (Heavy) pipe |
| 336 | DN80C (Heavy) pipe |
| 337 | DN100C (Heavy) pipe |
| 338 | DN125C (Heavy) pipe |
| 339 | DN150C (Heavy) pipe |
| 340 | DN 200C (Heavy) pipe, 6mm Thick |
| 341 | DN 50B (Medium) pipe |
| 342 | DN65B (Medium) pipe |
| 343 | DN80B (Medium) pipe |
| 344 | DN100B (Medium) pipe |
| 345 | DN125B (Medium) pipe |
| 346 | DN150B (Medium) pipe |
| 347 | Providing/Fitting of new bearing as under: (Make: SKF imported/ equivalent imported) |
| 348 | No. 3210 A/C3 |
| 349 | No. 3212 A/C3 |
| 350 | No. 3213 A/C3 |
| 351 | No. 3309 A/C3 |
| 352 | No. 3313 A/C3 |
| 353 | No. 51310 |
| 354 | No. 51312 |
| 355 | No. 51314 |
| 356 | No. 51320 |
| 357 | No. 6014 |
| 358 | No. 6220 |
| 359 | No. 6314 |
| 360 | No. 6315 |
| 361 | No. 6320 |
| 362 | No. 6324 |
| 363 | No. 6406 |
| 364 | No. 6408 |
| 365 | No. 6410 |
| 366 | No. 6411 |
| 367 | No. 6412 |
| 368 | No. 6415 |
| 369 | No. 6418 |
| 370 | No. NU322 ECJ |
| 371 | No. NU324 ECJ |
| 372 | No. 29322 E |
| 373 | No. 29324 E |
| 374 | No. 29328 E |
| 375 | No. 29330 E |
| 376 | No. 29424 E |
| 377 | No. 29426 E |
| 378 | Providing/Fitting of new bearing as under: (Make: Schaeffler (FAG)imported/ equivalent imported) |
| 379 | No. 6220 |
| 380 | No. 6317 |
| 381 | No. 6318 |
| 382 | No. 6319 |
| 383 | No. 6320 |
| 384 | No. 29322-E1-XL |
| 385 | 29324-E1-XL |
| 386 | No. 29326-E1-XL |
| 387 | No. 29328-E1-XL |
| 388 | No. 29330-E1-XL |
| 389 | No. 29424-E1-XL |
| 390 | No. 29426-E1-XL |
| 391 | Providing/Fitting of new bearing as under: (NBC/ ARB/ ZKL/ equivalent domestic) |
| 392 | No. 3210 |
| 393 | No. 3212 |
| 394 | No. 3213 |
| 395 | No. 3306 |
| 396 | No. 3307 |
| 397 | No. 3309 |
| 398 | No. 3310 |
| 399 | No. 3311 |
| 400 | No. 3312 |
| 401 | No. 3313 |
| 402 | No. 51310 |
| 403 | No. 51312 |
| 404 | No. 51314 |
| 405 | No. 51320 |
| 406 | No. 51322 |
| 407 | No. 6014 |
| 408 | No. 6028 |
| 409 | No. 6217 |
| 410 | No. 6220 |
| 411 | No. 6305 |
| 412 | No. 6306 |
| 413 | No. 6307 |
| 414 | No. 6308 |
| 415 | No. 6309 |
| 416 | No. 6310 |
| 417 | No. 6311 |
| 418 | No. 6312 |
| 419 | No. 6313 |
| 420 | No. 6314 |
| 421 | No. 6315 |
| 422 | No. 6320 |
| 423 | No. 6322 |
| 424 | No. 6406 |
| 425 | No. 6408 |
| 426 | No. 6410 |
| 427 | No. 6411 |
| 428 | No. 6412 |
| 429 | No. 6415 |
| 430 | No. 7312 |
| 431 | Providing and fitting of new plummer block/ bearing housing with designation as under: (Prefered makes: Masta/ SIBCO) |
| 432 | S 507 |
| 433 | S 508 |
| 434 | S 509 |
| 435 | S 510 |
| 436 | S 511 |
| 437 | S 512 |
| 438 | S 513 |
| 439 | S 515 |
| 440 | S 516 |
| 441 | S 517 |
| 442 | S 518 |
| 443 | S 519 |
| 444 | S 520 |
| 445 | S 522 |
| 446 | S 524 |
| 447 | Hiring of portable diesel engine operated pumpset for dewatering around workspace of pipes, etc. excluding fuel charges |
| 448 | Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 449 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 450 | Cutting charges of Mild steel pipes/ plates including cost of consumables, etc.but excluding the cost of transportation charges of equipment to site |
| 451 | Using grinder |
| 452 | By gas cutting |
| 453 | Welding charges of prepared Mild steel sections, etc including cost of consumables, etc. but excluding carriage of equipment to site, etc. |
| 454 | By electric welding |
| 455 | By gas welding |
| 456 | Hiring of mobile crane upto 5 Ton capacity |
| 457 | Hiring of excavator for earthwork excavation. |
| 458 | WTP Providing and fitting of 5kg/cm2, 12mm connection PP/ PE filter nozzle on bed of pressure filter vessel |
| 459 | Providing and laying of filter media (filter gravel and course sand) of specific size and grade in 5000/ 6000 GPH pressure vessel, duly washed and free from dust, dirt, loom and any other material or suspension. The job includes carriage of filter media including all loads and lifts. The media shall be laid in different layers of specific size and grade from bottom to top over the filter bed plate. The bottom layer is to be laid without tilting or damaging the pressure nozzles. |
| 460 | Providing of Grease (industrial type) conforming to IS 7623 (Preferred makes: HPCL Lithon-3/ Indian oil Servogem-3/ or equivalents of BPCL; Castrol; Caltex) |
| 461 | Providing of AP3 Grease (all purpose type) (Preferred makes: HPCL/ Indian oil/ BPCL/ Castrol/ Caltex) |
| 462 | Providing of mineral oil for bearing lubrication (Preferred make: Indian Oil Servo/ HPCL/ BPCL Mak/ Shell Mobil) |
| 463 | Providing of graphited natural fibre packing for pumps, etc. (Preferred make: Champion Style-3116 or equivalent) |
| 464 | Excavating trenches of required width for pipes, cables, etc in all kinds of soil including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m |
| 465 | Pipes, cables etc, not exceeding 80 mm dia. |
| 466 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 467 | Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm dia |
| 468 | Pipes, cables etc. exceeding 600 mm dia but not exceeding 1200 mm dia |
| 469 | Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre). |
| 470 | Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) |
| 471 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 472 | Gravel packing in tube well in accordance with IS: 4097, including providing gravel fine/ medium/ coarse in required grading and sizes as per actual requirement all complete as per direction of Engineer-in-charge. |
| 473 | PAINTING FOR REPAIRED PUMPS/ STEEL WORK |
| 474 | Removing of old paint, rust, foreign contaminants etc. from pump body (internal & external), structural work (gratings, any type of frame work, etc.) motor body or other equipment by scrapping, cleaning, rubbing, chipping by any means & preparing the surface to receive new coat of paint. The cost including cost of materials, labours, scaffolding etc. to complete the job at site as per direction of Engineer In Charge. |
| 475 | Providing & application of Primer (Epilux-610 Grey or any other approved brand) on cleaned surface of pump body (internal or external)/ motor body/ structral framework/ gratings, etc. including thinner (Epilux - 844 or any other approved brand) brush & other materials as required, labours, scaffolding etc. to complete the work at site as per direction of Engineer In Charge. For 1st coat of Primer (Manual painting) |
| 476 | Cost for supplying & application of coal tar epoxy Paint (Epilux-5 or any other approved brand) on cleaned surface of pump body/ motor body/ any stuctural framework, gratings including thinner (Epilux-844 or any other approved brand) & other materials as required, labours, brush, painting equipments etc. to complete the work at site as per direction of Engineer In Charge. |
| 477 | For 1st coat of Paint (Manual painting) |
| 478 | For 2nd coat of Paint (Manual painting) |
| 479 | Painting (two or more coats) on pipes and fittings with black anticorrosive bitumastic paint of approved brand over and including a priming coat of ready mixed zinc chromate yellow primer |
| 480 | Painting (two or more coats) with synthetic enamel paint of approved brand over cleaned/ prepared surfaces. |
| 481 | Hiring charges of Electrician (for troubleshooting/ revamping of existing electrical fitting, etc. exclusive of specified works): |
| 482 | Hiring charges of Labourer for support of electrician |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
